• Designed to maximize the performance of your compatible Gavita® fixtures.
• Simplifies lighting management with under-friendly interfaces.
• Range of models ensures the right fit for equipment needs.
• Latest generation EL3 controller compatible with Titan Controls™ Grow Room Sensors.

• Eight-foot (2.4 meter) power cords for Gavita® LED fixtures.
• Plug or bare-wire to 5-pin Wieland connections.
• 120-volt, 208- to 240-volt, 277- to 400-volt options.

• Designed to be used with Gavita® 1700e LED fixtures.
• Allows users to control fixtures with a Gavita EL series controller.
• Utilizes cables with RJ45 connectors for daisy chaining the control signal between adapters.
• Adapters are cETLus listed and IP66 rated for commercial use.
• Additional RJ45 to RJ45 cables available.
• Use RJ45 to RJ9 cable for connection to the Gavita Master Controller EL1 or EL2.
• Use three-way splitter for branching signal into dual paths.

• The Gavita® CT 1930e is the first LED to directly replace HPS.
• Fits seamlessly into existing HPS layouts.
• Highly energy-efficient delivering serious growing power.
• Designed as a 1:1 layout replacement for the Gavita Pro 1000e DE HPS.
• Compatible with wiring and electrical requirements for most indoor growing environments.
• Limits the cost and downtime required to convert facilities of every size.
• Delivers more light in a broader spectrum with up to 20% energy savings compared to Gavita 1000 W DE and single-ended HPS fixtures.*
• Compatible with Gavita EL Master Controllers (sold separately) and most building automation systems.
• Embedded controller technology enables control of up to 2,000 fixtures per EL Master control channel.

*based on average wattage of each fixture.

• High light intensity to help produce higher yields.
• Broad white light with enhanced blue spectrum which may intensify terpene and cannabinoid profiles.
• Foldable 8-rail fixture is a breeze to ship, store, and install.
• Dimmable down to 10% with the Gavita EL3 Master controller (sold separately).
• Delivers the highest efficiency of any full spectrum, Gavita LED fixture at an impressive 3.2 µmol/J.
• Premium diodes.
• Broad Range driver to accommodate a larger voltage range of 208 to 480 V.
• IP66 wet rating and ANSI/CAN/UL 8800 compliant.
• Assembled in the USA using foreign components.
• Dimensions: 44.1 in x 43.7 in x 3.3 in (112.0 x 111.0 x 8.4 cm).
• Weight: 33.6 pounds (15.24 kilograms).

• Designed as a direct replacement for HID fixtures, with plug-and-play installation for instant LED conversions.
• Wide, even light distribution indiscernible from HPS light throw, with better uniformity.
• Compact design fits most HPS layouts, reducing the pain when replacing hundreds at a time.
• Broad white light with enhanced blue spectrum which may intensify terpene and cannabinoid profiles.
• Dimmable down to 35% with the Gavita EL3 Master controller (sold separately).
• Delivers 2000 µmol s-1 PAR and an efficient 3.0 µmol/j.
• Premium diodes and drivers.
• Broad Range driver to accommodate a larger voltage range of 208 - 480 V.
• IP65 wet rating and ANSI/CAN/UL 8800 compliant.
• Assembled in the USA using foreign components.
• Weight: 34.5 pounds (15.65 kilograms).

• 2 LED Clone Bars per package.
• Perfect replacement for T5 fluorescent light fixture.
• 60% more efficient, running off 18 watts.
• Tested in nursery applications.
• Color temperature: 9,000° K.
• Delivers 35 µmol/s at an efficient 2.0 µmol/j.120° wide light distribution.
• 18W per strip (0.15 amps on 120V).
• Daisy chain up to 100 strips on a 20 amp circuit.
• Two strips in array per shelf.
• Easy installation with hanging clip and zip tie slot.
• IP66 wet rated; fully waterproof with water-resistant housing and connectors.
• Rated for 54,000 hours.
• Standard 5-year warranty.
• Mounting hardware and 120 V power cord included.

• Gavita E-series Interconnect Cables supply controller signals from one ballast to additional ballasts.
• Designed for daisy chain setups with Gavita Master Controllers.
• Available in 2, 5, 8, and 10-foot configurations to suit specific applications.

• Includes the HR96 Reflector for maximum efficiency and uniformity.
• Designed with broad light dispersion in mind.
• Highly efficient passive ballast cooling for longer fixture life.
• Sealed housing with a Gore-Tex® ventilation plug.
• Controllable output up to 1,150 watts.
• Equipped with a dimming knob for manual light output adjustment.
• Features a Repeater Bus interface for control with a Gavita EL Controller (sold separately).
• Connect up to 100 fixtures in a single daisy chain series, up to five daisy chains per EL controller output.
• A single EL controller output can control up to five 100-fixture daisy chains.

• Optional power cord for 277 volt or higher Gavita® fixtures.
• Can be disconnected by a fixture-side IP68 Wieland RST plug.
• Can be hardwired.
• 10 foot (3 meter) cord.

• Optional power cord for 277 volt or higher Gavita® fixtures.
• Can be disconnected by a fixture-side IP68 Wieland RST plug.
• Can be hardwired.
• 6 foot 6 inch (198 centimeter) cord.

• Optional power cord for 277 volt or higher Gavita® fixtures.
• Can be disconnected by a fixture-side IP68 Wieland RST plug.
• Can be hardwired.
• 3 foot (1 meter) cord.

• Three-way splitter.
• 6P6C connection jacks.
• Four-piece kit.

• Connects Gavita® EL3 Master controller to first Titan Controls® VPD Sensor or Titan Controls® Substrate Sensor.
• Products then daisy chain together after this first connection.

Lighting control at your fingertips! The Master controller EL 1 and EL2 Gen 2 are Gavita®'s entry-level systems for centrally controlling large rooms with e-series fixtures. The second generation of Master controllers features improved and expanded functionality that raises the bar including non-volatile memory, event logging, independent sunrise and sunset setting and independent light cycles on the EL2. The EL 1 has one lighting control channel and the EL2 has two lighting control channels. The EL 1 can control 500 max repeater bus fixtures and 40 max single bus fixtures without a booster. The EL2 can control 1000 max repeater bus fixtures and 80 max single bus fixtures without a booster.

• Used to operate one or more Gavita® CT 1930e light fixtures without the use of a lighting controller.
• Ensures continuous operation at 100% output* when placed on the input of the first fixture.

Each Gavita LED Bracket unit includes 2 brackets (sold as a pair).

The Gavita® Master Controller EL3 is the next generation in our EL controller series, designed to maximize the performance of your compatible fixtures. The EL3 enables you to set sunrise/sunset dimming, high-temperature dimming, and high-temperature shut-off for all connected fixtures. Best of all, the EL3 lets you build and program entire schedules for your growing cycles. When using a compatible Gavita or Sun System LED fixture, you will be able to view at the individual fixture level, how each one is performing.

Lighting control at your fingertips! The Master controller EL 1 and EL2 Gen 2 are Gavita®'s entry-level systems for centrally controlling large rooms with e-series fixtures. The second generation of Master controllers features improved and expanded functionality that raises the bar including non-volatile memory, event logging, independent sunrise and sunset setting and independent light cycles on the EL2. The EL 1 has one lighting control channel and the EL2 has two lighting control channels. The EL 1 can control 500 max repeater bus fixtures and 40 max single bus fixtures without a booster. The EL2 can control 1000 max repeater bus fixtures and 80 max single bus fixtures without a booster.

The Gavita® E-series Interconnect Cables are used to supply controller signal from ballast to additional ballasts (daisy chain) for use with the Gavita Master Controllers. They come in 2-, 5-, 8-, and 10-foot (61-centimeter, 1.5-, 2.4-, and 3-meter) configurations to best fit your specific application.

Gavita® Controller Cables attach to Gavita Master controller to the Gavita E-Series ballast. These come in 5, 16 and 25 ft configurations to best fit your specific application.

• Eight-foot (2.4 meter) power cord for Gavita® LED fixtures.
• 277- to 400-volt bare wire to 5-pin Wieland connection.

• Eight-foot (2.4 meter) power cord for Gavita® LED fixtures.
• 120-volt plug to 5-pin Wieland connection.

• Eight-foot (2.4 meter) power cord for Gavita® LED fixtures.
• 208- to 240-volt plug to 5-pin Wieland connection.

Gavita® horticultural High Pressure Sodium (HPS) lamp with high output and extreme long light maintenance. Change once a year for best results. Light maintenance 5,000 hrs: >96%. Color temperature is 2,100° K and the lamp base is K12 x 30s. Suitable for High Frequency Gavita ballasts. The jacket of this double-ended lamp is made from quartz glass. Do not handle with bare hands. Oil from your hands can damage the lamp.

Replacement reflector for the Gavita® Pro line and HortiStar requires no tools to install. The medium spread of this reflector with 100° beam angle is great for tents and small rooms. This is Gavita’s most suitable reflector for single-light set ups. The 100° is designed for uniformity and deep crop penetration in 1-2 fixture configurations. Suitable for double-ended 750-1,000W HPS.

The Gavita® Pro 1700e LED is a 1700 µmol s-1 fixtures with an impressive efficiency of 2.7 µmol s-1 per watt. The pro 1700e delivers broad coverage with its 8 passively cooled LED bard. The 8-bar configuration allows you to use it in low rooms, over single benches, or even in 4 x 4 ft or 5 x 5 ft tents. This powerful, full-spectrum light source is intended for full term plant growth from the vegetative stage to the higher light requiring bloom stage. Fixture is dimmable to 50% without any loss of efficiency with the use of the Master Controllers. The Gavita E-Series Led adaptor 120-277V #906151 or 367V #906150 (sold separately) is needed for each fixture when using the controller. This fixture is build with high-quality 120-277 or 347 volt Philips brand drivers. Sun Grip® light hangers are included for handing the fixture. Dimensions 44.1 in x 44.1 in x 2.1 in. 630 watts. The Gavita Pro 1700e fixtures are UL listed, IP66 wet location rated, and FCC compliant.

• Connects Gavita LED fixtures together.
• 10-foot (3-meter) RJ45-to-RJ45 signal cable.

• Connects Gavita® EL1 or EL2 controllers to the first Gavita LED fixture.
• 25-foot (7.5-meter) RJ45-to-RJ9 signal cable.

• Designed to be used with Gavita 1700e LED fixtures.
• Branches the signal into dual output paths.
• For cables with RJ45 connectors.

• Includes the HR96 Reflector for maximum efficiency and uniformity.
• Designed with broad light dispersion in mind.
• Highly efficient passive ballast cooling for longer fixture life.
• Sealed housing with a Gore-Tex® ventilation plug.
• Controllable output up to 1,150 watts.
• Equipped with a dimming knob for manual light output adjustment.
• Features a Repeater Bus interface for control with a Gavita EL Controller (sold separately).
• Connect up to 100 fixtures in a single daisy chain series, up to five daisy chains per EL controller output.
• A single EL controller output can control up to five 100-fixture daisy chains.

• The Gavita® CT 1930e is the first LED to directly replace HPS.
• Fits seamlessly into existing HPS layouts.
• Highly energy-efficient delivering serious growing power.
• Designed as a 1:1 layout replacement for the Gavita Pro 1000e DE HPS.
• Compatible with wiring and electrical requirements for most indoor growing environments.
• Limits the cost and downtime required to convert facilities of every size.
• Delivers more light in a broader spectrum with up to 20% energy savings compared to Gavita 1000 W DE and single-ended HPS fixtures.*
• Compatible with Gavita EL Master Controllers (sold separately) and most building automation systems.
• Embedded controller technology enables control of up to 2,000 fixtures per EL Master control channel.
• Voltage: 120-277 V.

*based on average wattage of each fixture.

• The Gavita® CT 1930e is the first LED to directly replace HPS.
• Fits seamlessly into existing HPS layouts.
• Highly energy-efficient delivering serious growing power.
• Designed as a 1:1 layout replacement for the Gavita Pro 1000e DE HPS.
• Compatible with wiring and electrical requirements for most indoor growing environments.
• Limits the cost and downtime required to convert facilities of every size.
• Delivers more light in a broader spectrum with up to 20% energy savings compared to Gavita 1000 W DE and single-ended HPS fixtures.*
• Compatible with Gavita EL Master Controllers (sold separately) and most building automation systems.
• Embedded controller technology enables control of up to 2,000 fixtures per EL Master control channel.
• Voltage: 277-480 V.

*based on average wattage of each fixture.

The Gavita® RS 1900e produces 1900 µmol s-1 PAR and an impressively efficient 3.0 µmol/j and delivers a broad white light with an enhanced blue spectrum, which some studies show may intensify secondary metabolites, such as terpenes and cannabinoids. This powerful, full-spectrum light source is intended for full-term plant growth - from the vegetative stages to higher-light-requiring bloom and finishing stages. Using the Gavita Master EL3 Controller (sold separately), the fixture is dimmable to 10%.

• One of the best 1,000 watt HPS lamps on the market.
• It is specifically designed for high frequency electronic ballasts.
• Connection at each end of the lamp removes need for a frame wire inside.
• Lamp jacket is made from quartz glass.
• For use with Gavita fixtures only.

• High light intensity to help produce higher yields.
• Broad white light with enhanced blue spectrum which may intensify terpene and cannabinoid profiles.
• Dimmable down to 10% with the Gavita® EL3 Master controller (sold separately).
• Premium Gavita diodes and drivers.
• Delivers the highest efficiency of any full spectrum.
• DLC listed LED fixture at an impressive 3.0 μmol/J*.
• Embedded adapter for maximum controllability with the Gavita EL3 Master controller (sold separately).
• Foldable 8-rail fixture is a breeze to ship, store, and install.
• IP66 wet rating and ANSI/CAN/UL 8800 compliant.
• Assembled in the USA using foreign components.
• Five-year limited warranty.
• Dimensions: 44.1 x 43.7 x 3.3 inches (112.01 x 111 x 8.4 centimeters).
• Weight: 36 pounds (16.33 kilograms).

• Broad white light with enhanced blue spectrum which may intensify terpene and cannabinoid profiles.
• A light weight, foldable, 6-bar design based on the Gavita Pro RS 2400e LED platform for balanced output and efficiency.
• Dimmable down to 10% with the Gavita EL3 Master controller (sold separately).
• Premium Gavita diodes.
• Broad Range Gavita driver to accomodate a larger voltage range of 208 - 480 V.
• IP66 wet rating and ANSI/CAN/UL 8800 compliant.
• Assembled in the USA using foreign components.
• Dimensions: 44.8 in x 43.25 in x 3.3 in (113.8 x 109.9 x 8.4 cm)
• Weight: 29.8 lbs (13.5 kg).

Replacement bracket for Gavita® CT 1930e LED.

• High light intensity to help produce higher yields.
• Broad white light with enhanced blue spectrum which may intensify terpene and cannabinoid profiles.
• Foldable 8-rail fixture is a breeze to ship, store, and install.
• Dimmable down to 10% with the Gavita EL3 Master controller (sold separately).
• Delivers the highest efficiency of any full spectrum, Gavita LED fixture at an impressive 3.2 µmol/J.
• Premium diodes.
• Broad Range driver to accommodate a larger voltage range of 208 to 480 V.
• IP66 wet rating and ANSI/CAN/UL 8800 compliant.
• Assembled in the USA using foreign components.
• Dimensions: 44.1 in x 43.7 in x 3.3 in (112.0 x 111.0 x 8.4 cm).
• Weight: 33.6 pounds (15.24 kilograms).

• Designed as a direct replacement for HID fixtures, with plug-and-play installation for instant LED conversions.
• Wide, even light distribution indiscernible from HPS light throw, with better uniformity.
• Compact design fits most HPS layouts, reducing the pain when replacing hundreds at a time.
• Broad white light with enhanced blue spectrum which may intensify terpene and cannabinoid profiles.
• Dimmable down to 35% with the Gavita EL3 Master controller (sold separately).
• Delivers 2000 µmol s-1 PAR and an efficient 3.0 µmol/j.
• Premium diodes and drivers.
• Broad Range driver to accommodate a larger voltage range of 208 - 480 V.
• IP65 wet rating and ANSI/CAN/UL 8800 compliant.
• Assembled in the USA using foreign components.
• Weight: 34.5 pounds (15.65 kilograms).

• 2 LED Clone Bars per package.
• Perfect replacement for T5 fluorescent light fixture.
• 60% more efficient, running off 18 watts.
• Tested in nursery applications.
• Color temperature: 9,000° K.
• Delivers 35 µmol/s at an efficient 2.0 µmol/j.120° wide light distribution.
• 18W per strip (0.15 amps on 120V).
• Daisy chain up to 100 strips on a 20 amp circuit.
• Two strips in array per shelf.
• Easy installation with hanging clip and zip tie slot.
• IP66 wet rated; fully waterproof with water-resistant housing and connectors.
• Rated for 54,000 hours.
• Standard 5-year warranty.
• Mounting hardware and 120 V power cord included.

Pair of eyebolts with M6 hex nuts to hang your Gavita® lighting fixtures. Pair of eyebolts, with M6 hex nuts to hang your Gavita lighting fixtures. Includes 2 M6 eye bolts and 3 M6 hex nuts.

• Single-ended horticultural fixture.
• Contains two Philips 315 watt 4,200° Kelvin CMH lamps.
• Ideal for vegetative or supplemental use.
• Repeater Bus interface enables external control with the Gavita® Master controllers.
• This compact fixture integrates ballast and reflector.
• Intelligent double-ballast concept: switch off one lamp in the fixture.
• Reflector is designed for CMH only installations:
• Medium 132° beam angle for double CDM 315 fixtures.
• High-grade Miro® aluminum.
• Provides 90%+ uniformity and optimal horizontal crop penetration.

The Gavita® Pro 1700e LED is a 1700 µmol s-1 fixtures with an impressive efficiency of 2.7 µmol s-1 per watt. The pro 1700e delivers broad coverage with its 8 passively cooled LED bard. The 8-bar configuration allows you to use it in low rooms, over single benches, or even in 4 x 4 ft or 5 x 5 ft tents. This powerful, full-spectrum light source is intended for full term plant growth from the vegetative stage to the higher light requiring bloom stage. Fixture is dimmable to 50% without any loss of efficiency with the use of the Master Controllers. The Gavita E-Series Led adaptor 120-277V #906151 or 367V #906150 (sold separately) is needed for each fixture when using the controller. This fixture is build with high-quality 120-277 or 347 volt Philips brand drivers. Sun Grip® light hangers are included for handing the fixture. Dimensions 44.1 in x 44.1 in x 2.1 in. 630 watts. The Gavita Pro 1700e fixtures are UL listed, IP66 wet location rated, and FCC compliant.

• Conversion cable for Gavita LED fixtures.
• 3-pin to 5-pin Wieland connections.