Growing Environment

• Compatible with AC/DC brush-type motors up to 15 Amps.
• Three adjustable switch settings: full, variable, and off.
• Variable setting allows adjustable knob to control fan speed.
• Features a 6 ft 120 V power cord.
• Maximum load capacity of 15 Amps.
• Not compatible with soft or slow-start motors.

• Engineered specifically for commercial applications facing heavy moisture loads, including grow rooms.
• Uses advanced M-CoRR technology to provide maximum efficiency while reducing heat output.
• Removes 350 pints of moisture daily with advanced multi-coil M-CoRR Technology.
• Maintains efficiency with filter compensation that adjusts fan speed as filters clog.

208-230 V @ 80 F | 60% RH

• Capacity: 350 Pints/Day
• Efficiency: 9.3 Pints/kWh
• Supply Voltage: 208-230 V
• Current Draw: 7.9A @208 V / 6.9A @230 V

277 V @ 80 °F | 60% RH

• Capacity: 350 Pints/Day.
• Efficiency: 8.5 Pints/kWh.
• Supply Voltage: 277 V.
• Current Draw: 6.8 Amps.

• High-capacity commercial dehumidifier featuring patented M-CoRR technology.
• Provides industry-leading efficiency by recycling excess heat and minimizing heat output.
• Operates on 277V with low amp draw, eliminating the need for costly buck-boost transformers.

@ 80 F | 60% RH

• Capacity 506 Pints/Day
• Efficiency 8.1 Pints/kWh
• Supply Voltage 277V
• Current Draw 10 Amps

• A 100-pint dehumidifier designed for small spaces and projects.
• Features M-CoRR technology for maximum energy efficiency, saving you money.
• Equipped with premium MERV-13 filtration for healthier air and better control over your environment.
• Model #4044590 uses environmentally-friendly R454B refrigerant, combining efficiency and sustainability in a compact footprint.

@ 80 °F | 60% RH

• Capacity: 100 Pints/Day.
• Efficiency: 7.5 Pints/kWh.
• Supply Voltage: 110-120 V, 60 Hz.
• Current Draw: 5 Amps.

• Tracks substrate data: temperature, electrical conductivity (EC), and volumetric water content (VWC).
• Monitors atmospheric data: air temperature, relative humidity, vapor pressure deficit, and CO₂.
• Offers automated real-time readings every three minutes with no gaps.
• Features an intuitive web app for easy data review and grow zone management.
• Allows seamless system setup with sensors that sync automatically within 30 feet.
• Supports historical data review with 60 days of past grow insights stored.
• Expands to integrate additional sensors and irrigation controllers.

Includes:

• Two TEROS ONE substrate sensors.
• One CLIMATE ONE climate station.
• One GATEWAY data hub*.
• Accessory kits for GATEWAY and CLIMATE ONE.
• Substrate sensor alignment tool.
• Three years of AROYA software access for three users (standard pricing after).
• 60 days of rolling cloud data storage*.
• Irrigation control integration (controller not included).

• Delivers 10x more precise electrical conductivity measurements.
• Measures water content and volumetric water content.
• Tracks substrate temperature for optimal root zone management.
• Provides continuous data synced to AROYA every three minutes.
• Costs less with enhanced features after extensive R&D.
• Seamlessly integrates with AROYA software platforms.
• Designed for durability with corrosion-resistant materials.
• Offers easy installation with stainless steel needle design.
• Features automatic calibration for various grow media.

!! NOTE: AROYA GO bundle or AROYA Core with an included software license is a requirement for using and purchasing this product.

• Energy-Efficient Technology: Utilizes M-CoRR Technology to recycle excess heat, providing high energy efficiency and reducing operational costs.
• Flexible Installation: Compact size with a flexible voltage range and integrated lift and hang points for versatile installation options.
• Superior Air Filtration: Features MERV-13 air filtration, which is 20% more effective than MERV-11, ensuring safer and healthier air quality.

@ 80°F | 60% RH

• Capacity: 225 Pints/Day
• Efficiency: 7.6 Pints/kWh
• Supply Voltage: 208-230 V, 60 Hz
• Current Draw: 6.1 @ 208 V / 5.5 @ 230 V

• Energy-efficient performance: Removes 155 pints/day with an impressive efficiency of 8.5 pints/kWh,.
• Compact and easy installation: 20% smaller than the Quest Dual 155, plugs into any standard 120v outlet, and features integrated hang points for simple overhead setup.
• Low-maintenance design: Onboard digital controls, self-diagnostics, and a removable access panel for easy servicing even when installed overhead.

@ 80°F | 60% RH

• Capacity: 155 Pints/Day
• Efficiency: 8.5 Pints/kWh
• Supply Voltage: 110-120 V
• Current Draw: 6.9 Amps

• High Capacity & Efficiency: The Quest 205 dehumidifier removes 200 pints of water per day using 10 amps, making it more energy-efficient than its predecessors and competitors.
• Innovative Technology: Features M-CoRR™ Technology, which recycles energy during dehumidification, boosting capacity by 30%.
• User-Friendly Design: Includes onboard digital controls, remote connectivity, and easy overhead installation with integrated hang points for space-saving and maintenance convenience.

@ 80°F | 60% RH

• Capacity: 200 Pints/Day
• Efficiency: 7.7 Pints/kWh
• Supply Voltage: 110-120V
• Current Draw: 10.0 Amps

@ 80°F | 60% RH

• Water removal: 730 pints | 345 liters | 91.3 gallons
• Efficiency: 8.3 pints/kWh
• Supply voltage: 480 V, 3 phase, 60 Hz
• Amps: 4.9
• Energy factor: 3.9 L/kWh
• Operating temp: 56°F min – 95°F max
• Air filter: MERV-13 (Qty 2)
• Dimensions (L x W x H): 44.8 x 28.9 x 27.4 in (113.8 x 73.4 x 69.6 cm)

• Monitors air temperature, relative humidity, VPD, and ambient CO₂ levels.
• Provides accurate VPD calculations with precise temperature and humidity data.
• Samples ambient CO₂ five times per minute for precise CO₂ control.
• Integrates with the AROYA app for automatic data syncing every three minutes.
• Easy installation with included pulley system and hanging hooks.
• Rugged construction for durability in demanding grow environments.
• Wireless BLE mesh network connectivity for reliable data transmission.
• 48V PoE power supply with 3W peak consumption.
• Trade-in discount of 25% for upgrading from an old AROYA climate station.
• Measures temperature (-10 to 50 °C) and CO₂ (0 to 2,000 ppm) with high accuracy.

Quick maintenance with easy filter access that is removable and washable. Low temperature defrosting. Easy to move with built-in handles and wheels. Easy-to-use LED display panel. Removable water tank with an automatic shutoff when reservoir is full. The reservoir for the dehumidifiers is 6 liters or 12.5 pints. 22 pint is 4.0 Amps/420 W. 30 pint is 4.7 Amps/520 W. 50 Pint is 6.9 Amps/720 W. 115 V. Can be plumbed for permanent drainage.

Ideal-Air™ Pro Series 180 Pint Dehumidifier has automatic restart if power is lost. Easy-to-use digital display humidity readings, internal condensate pump, removable washable filter, 1 speed fan motor, powder-coated metal casing for long life and a heavy-duty compressor. Built-in defrost that is designed for operation down to 41°F. Set upright on their feet for 3 hrs prior to use. 180 pint unit: Temp. Range: 41°F–95°F, condensation removal: (24 hrs) 180 pints (86°F, 80% RH); Power: 12.31 Amps/1350 W; Supply Voltage: 115 V - 1 Phase - 60 Hz; R410A. Ideal-Air™ recommends that dehumidifiers use surge protectors and a dedicated electrical circuit. In the event of a power failure, a spike in voltage may occur when the power is reinstated. This can damage the circuit board, which is not covered under warranty.

The Ideal-Air™ Pro Series Ultra Sonic Humidifier is designed with ultra-sonic transducers to supply ultra-fine water particles. This is to help form a more balanced humidity field over your plant's entire canopy. Ideal-Air™ Pro Series Ultra Sonic Humidifier plates are made from cold-rolled steel and a stainless steel box with a standard water inlet with overflow safety switch, reservoir drain outlet, sediment filter, LED display and humidity control (30%–90%). This unit is designed to produce up to 150 pints per day of ultra-fine mist. 115 V, 60 Hz and 2.7 Amps. We recommend all Ultra Sonic Humidifiers be ducted, using 4 in PVC or 4 in DWV plastic pipe works best. Units should not be run without ducting or the top of the unit may be covered in water and shut off. Please don’t fill the unit through the discharge piping outlets. Doing this will overfill the tank and prevent the unit from creating humidity. The unit should only be filled through the provided hose and float valve to ensure proper water level and correct operation.

The Titan Controls™ grow room sensors are designed for the grower in mind. For use with the Gavita™ EL3 Controller (sold separately and requires Titan Sensor Adapter Cable), they provide accurate environmental data and historical conditions that allow growers to further enhance and optimize their growing room.

The Titan Controls™ Tali™ 3 in 1 VPD Sensor is designed to accurately measure the temperature, humidity, and air pressure of your growing environment. Using these readings, it will accurately calculate the VPD (vapor pressure deficit) for the monitored area. An easy-to-read LED screen allows you to quickly see what’s going on in your environment.

The Titan Controls™ Triton™ Standard Substrate Sensor is designed to accurately measure the EC (electrical conductivity), VWC (volumetric water content), and temperature of your substrate (growing media). Understanding these three metrics will allow you to optimize your irrigation strategy to realize your plants' full potential. The compact design allows this sensor to be easily installed in most applications.

• High performance inline fans.
• Feature superior plastic or metal construction.
• Available in 10 or 12 inches sizes.
• Speed controllable.
• Vibration-free operation.
• Come with pre-installed cords from the manufacturer.
• Protected by a 1 year warranty.

• Designed to allow airflow in one direction.
• Minimum air leakage: exterior foam gaskets assure a tight seal.
• Aluminum spring-loaded backdraft damper blades.
• 20 gauge steel housing.
• Simple installation: entire assembly inserts into duct.
• Can be installed in any position: designed for vertical or horizontal mount.
• Specifically designed for use with ThermoFlo™ flexible ducting.
• Available in a range of sizes.

The Max-Fan® is the first fan that has been developed with a Computational Fluid Dynamics (CFD) program. CFDs are used for engineering aircraft propulsion engines. The perfectly designed 3D blades of the impeller and stator make this fan extremely powerful and energy efficient. Compared with other inline fans, the efficiency is 50% to 100% higher. 6 inch to 14 inch come pre-wired with an 8 foot 120 V power cord. Can-Fan® bring its innovation to market and sets a new standard for performance. The Max-Fan is a more powerful and efficient fan that takes less energy to run.

The Max-Fan® Pro Series is even more efficient and stronger than the original Max-Fan design. The Max-Fan Pro Series has a much more robust housing due to the fiberglass reinforced plastic compounds that meet all of the UL and CSA requirements. The fans have three control speeds for true performance. These fans run quieter than the Max-Fan. The fans come with the EZ Mount™ bracket for easy mounting.

The Atlas® 1 CO₂ features adjustable set point and elevation levels, a built-in self calibration function and an integrated photocell that enables operation in daytime hours only, when the plants need CO₂.

The Atlas® 2 features preset CO₂ control at 1,500 PPM. Simply plug in your CO₂ generator or regulator and you are ready to go.

The Atlas® 3 Controls and monitors CO₂ from 0 to 2,000 parts per million (PPM).

Compact and easy-to-use, the Atlas® 9 is a grower's dream. The 15 ft remote sensor allows you to measure the CO₂ levels of your garden exactly where you need to measure them.

CO₂ is scientifically proven to improve the performance of plants! The Ares® Series CO₂ generators provide a clean and efficient way to enrich your grow area with CO₂. Ares® Series CO₂ generators come with everything you need to get your CO₂ system started. Includes: CO₂ generator, AC power supply, hanging chain, ceiling hook, appropriate hose and regulator. All you need to provide is a gas source! 1.5 Amps/120 V/ 60 Hz.

• Ideal for residential, commercial, and industrial applications.
• Easy to install inline configuration, compatible with variable speed controllers.
• Designed to overcome resistance from long ducting; works with flexible and rigid ducting.
• Permanently lubricated for maintenance-free and continuous operation.
• Balanced fan and motor assembly for quiet, vibration-free performance.
• Features infinitely variable airflow with available 3-wire solid-state speed control.
• Suitable for light dust and fumes.
• Heavy-gauge, spun steel housing with baked epoxy finish inside and outside.
• Backward curved blades for low sound and ample static pressure.
• Durable external rotor motor with thermal reset overload protection.
• Pre-wired with 120-volt power cords.

• Indoor/outdoor thermo-hygrometers.
• Separate display for humidity and temperature.
• Memory for the highest and lowest temperature and humidity.
• Designed to stand or to be hung.
• Batteries included.

• Measures photosynthetically active radiation.
• Hand-held meter displays and stores measurements.
• Sensor features blue-enhanced silicon photodiode and custom optical filters.
• Designed for PPFD measurement in various environments: outdoor, greenhouses, growth chambers.
• Ideal for aquatic environments like saltwater aquariums for coral growth.
• Features sample and log modes.
• Sample mode records up to 99 manual measurements.
• Log mode averages measurements every 30 minutes.
• Data can be reviewed on LCD or downloaded to a computer.
• Requires AC-100 communication cable and ApogeeAMS software for computer download.