Fans / Ventilation / Ducting

• Industrial-quality insulated flexible air duct.
• Manufactured tough for consumer and installer peace of mind.
• Features high-standard c-ETL-us / Can / ULC-S110-M86 / UL 181 approved cores.
• Consists of a three-ply polyester laminate, fiberglass reinforced scrim, and galvanized spring steel wire wrapped with fiberglass insulation.
• Provides an outstanding combination of strength and tear resistance.
• Insulation reduces heat loss and condensation.
• Heavy-duty fire-retardant black polyethylene vapor barrier adds extra durability.
• Ducting is marked approximately every foot for easy installation.
• Instructions included in each case.
• Made in Canada.
• 25-foot (7.6-meter) standard lengths.
• Size: 10 inches x 25 feet (25 centimeters x 7.6 meters).

• Ideal for residential, commercial, and industrial applications.
• Easy to install inline configuration, compatible with variable speed controllers.
• Designed to overcome resistance from long ducting; works with flexible and rigid ducting.
• Permanently lubricated for maintenance-free and continuous operation.
• Balanced fan and motor assembly for quiet, vibration-free performance.
• Features infinitely variable airflow with available 3-wire solid-state speed control.
• Suitable for light dust and fumes.
• Heavy-gauge, spun steel housing with baked epoxy finish inside and outside.
• Backward curved blades for low sound and ample static pressure.
• Durable external rotor motor with thermal reset overload protection.
• Pre-wired with 120-volt power cords.

• Ideal for residential, commercial, and industrial applications.
• Easy to install inline configuration, compatible with variable speed controllers.
• Designed to overcome resistance from long ducting; works with flexible and rigid ducting.
• Permanently lubricated for maintenance-free and continuous operation.
• Balanced fan and motor assembly for quiet, vibration-free performance.
• Features infinitely variable airflow with available 3-wire solid-state speed control.
• Suitable for light dust and fumes.
• Heavy-gauge, spun steel housing with baked epoxy finish inside and outside.
• Backward curved blades for low sound and ample static pressure.
• Durable external rotor motor with thermal reset overload protection.
• Pre-wired with 120-volt power cords.
• 4 in (10 cm) 152 CFM inline duct fan.

• Ideal for residential, commercial, and industrial applications.
• Easy to install inline configuration, compatible with variable speed controllers.
• Designed to overcome resistance from long ducting; works with flexible and rigid ducting.
• Permanently lubricated for maintenance-free and continuous operation.
• Balanced fan and motor assembly for quiet, vibration-free performance.
• Features infinitely variable airflow with available 3-wire solid-state speed control.
• Suitable for light dust and fumes.
• Heavy-gauge, spun steel housing with baked epoxy finish inside and outside.
• Backward curved blades for low sound and ample static pressure.
• Durable external rotor motor with thermal reset overload protection.
• Pre-wired with 120-volt power cords.
• 5 in (13 cm) 212 CFM inline duct fan.

• Designed for Elicent AXC fans.
• 3 amp, 3 wire controller.
• Ensures efficient operation at all speeds.
• Eliminates motor strain and humming.

• Easy fan speed and noise control.
• Plug-in versatility.
• Maximum amp load: 2.5A.
• No tools required.
• Maximum Input: 120 V AC, 2.5A, 50/60 Hz.
• Maximum Output: 120 V AC, 2.5 FLA, 6 LRA, 300 W.

• High performance inline fans.
• Feature superior plastic or metal construction.
• Available in 10 or 12 inches sizes.
• Speed controllable.
• Vibration-free operation.
• Come with pre-installed cords from the manufacturer.
• Protected by a 1 year warranty.

• High performance inline fans.
• Feature superior plastic or metal construction.
• Speed controllable.
• Vibration-free operation.
• Come with pre-installed cords from the manufacturer.
• Protected by a 1 year warranty.
• 10 in (25 cm) 780 CFM metal fan.

• High performance inline fans.
• Feature superior plastic or metal construction.
• Speed controllable.
• Vibration-free operation.
• Come with pre-installed cords from the manufacturer.
• Protected by a 1 year warranty.
• 12 in (30 cm) 1,060 CFM metal fan.

• Designed to allow airflow in one direction.
• Minimum air leakage: exterior foam gaskets assure a tight seal.
• Aluminum spring-loaded backdraft damper blades.
• 20 gauge steel housing.
• Simple installation: entire assembly inserts into duct.
• Can be installed in any position: designed for vertical or horizontal mount.
• Specifically designed for use with ThermoFlo™ flexible ducting.
• Available in a range of sizes.

The Max-Fan® is the first fan that has been developed with a Computational Fluid Dynamics (CFD) program. CFDs are used for engineering aircraft propulsion engines. The perfectly designed 3D blades of the impeller and stator make this fan extremely powerful and energy efficient. Compared with other inline fans, the efficiency is 50% to 100% higher. 6 inch to 14 inch come pre-wired with an 8 foot 120 V power cord. Can-Fan® bring its innovation to market and sets a new standard for performance. The Max-Fan is a more powerful and efficient fan that takes less energy to run.

The Max-Fan® Pro Series is even more efficient and stronger than the original Max-Fan design. The Max-Fan Pro Series has a much more robust housing due to the fiberglass reinforced plastic compounds that meet all of the UL and CSA requirements. The fans have three control speeds for true performance. These fans run quieter than the Max-Fan. The fans come with the EZ Mount™ bracket for easy mounting.

The Max-Fan® Pro Series is even more efficient and stronger than the original Max-Fan design. The Max-Fan Pro Series has a much more robust housing due to the fiberglass reinforced plastic compounds that meet all of the UL and CSA requirements. The fans have three control speeds for true performance. These fans run quieter than the Max-Fan. The fans come with the EZ Mount™ bracket for easy mounting.

• Easily reduce or increase duct diameter to suit requirements.
• Made with heavy-duty galvanized steel.
• Powder coated white.
• Designed for use with ThermoFlo™ flexible ducting.
• Available in a range of sizes.

• Allows multiple ventilation areas to be accessed by a single inline-fan source or for several fans to join a single exhaust.
• The "T" shape makes it ideal for right-angle joins in large spaces.
• Made with heavy-duty galvanized steel and powder coated white.
• Specifically designed to be used with ThermoFlo flexible ducting.
• Available in a range of sizes.

• Allows multiple ventilation areas to be accessed by a single inline-fan source or for several fans to join a single exhaust.
• The “Y” shape makes it useful in areas with tight access angles.
• Made with heavy-duty galvanized steel and powder coated white.
• Specifically designed to be used with ThermoFlo flexible ducting.
• Available in a range of sizes.

• Stainless steel clamps for attaching ducting.
• Make for clean and attractive duct connection.
• Simple to use.
• Available in a range of sizes.

• Connects two segments of round duct together.
• Ideal where added stability and sealing is required.
• Required when passing ventilation through a wall.
• Easily installed.
• Crafted with powder-coated heavy-duty galvanized steel.
• Designed for use with ThermoFlo flexible ducting.
• Available in a range of sizes.