Chillers, Heaters & Purification

Suitable for use with reservoirs, hydroponic systems and aquariums. Features a commercial-grade titanium heat exchanger for optimum performance and corrosion resistance. High-quality Japanese compressor is extremely efficient and reliable. Heavy-duty galvanized steel housing with a durable powder-coated finish. Digital LCD display allows for easy operation. Remote temperature controller with a 30 ft cord allows user to monitor and adjust chiller settings when the unit is installed in a remote location. Auto restart and temperature memory in the event of a power failure. Uses environmentally friendly R410A refrigerant. Comes with 2 fittings to allow chiller to be plumbed with 1 in hard PVC pipe or 1 in flexible tubing.

This pump is designed to be installed before the Stealth RO to boost the inlet pressure. Wells and low pressure (below 40 PSI) water sources can benefit greatly from this pump. It boosts the pressure significantly allowing the Stealth RO to run with higher flow and more efficiency while having better TDS removal. The pump is designed for long service life and runs very quietly. Comes with a high pressure switch and operates at 110V.

Big Boy™ extra high capacity dechlorinator and sediment filter. High flow rate of 7 gallons per minute or 420 gallons per hour. It has a 25,000 gallon capacity. Removes 99% of chlorine and 95%+ of sediment, rust, silt, etc. Includes: 2-stage oversized housings with pleated, cleanable sediment, and carbon block filters, inlet and outlet pressure gauges, heavy-duty wall-mountable aluminum bracket—NO RUST, 1 in inlet and outlet, filter wrench and instructions.

Unit size 29.5 in x 16 in x 8.5 in and weight is 30 lb.

The pleated sediment filters are cleaned by rinsing regularly with a hose. The filters reduces silt, rust, dirt, sand and sediment. Change filters every 6 months. #741654 is 10 in x 2.5 in. #741642 is 10 in x 4.5 in. #741606 is 20 in x 4.5 in.

Electronic control unit for EcoPlus® Commercial Chillers.

• Utilize the John Guest Quick Connect (QC) 2-Way Splitter for multiple reservoirs.
• Compatible with the Stealth RO system and Small Boy system.
• Suitable for any system that uses 1/4 inch tubing.
• Use the 3/8 inch splitter for multiple reservoirs with the TallBoy system.
• Also compatible with any system that uses 3/8 inch tubing.

Use the John Guest Quick Connect (QC) Ball Valve Inline Shut-Offs to customize your indoor hydroponic garden water purification system.

Use John Guest 1/4 x 1/4 Inch Quick Connect (QC) Unions to customize your indoor hydroponic garden water purification system.

Use John Guest 1/4 Inch Quick Connect (QC) Tees to customize your indoor hydroponic garden water purification system.

Use John Guest 3/8 x 1/4 Inch Quick Connect (QC) Reducing Unions to customize your indoor hydroponic garden water purification system.

• Designed for source water high in hardness.
• Reduces calcium/magnesium scale accumulation.
• Extends the life of membranes.
• Manufactured to strict Hydro-Logic quality standards.
• Replace after processing 75,000 gallons.

• Customized flow restrictor for optimal contact time with filtration media.
• Maximizes reduction of chlorine, sediment, rust, silt, mercury, lead, and PCBs (organic chlorine).
• Protects beneficial bacteria to invigorate organic compost, soil amendments, and bio-teas.
• Easily attaches to garden hose.
• 11,000-gallon capacity (30 GPD = 365 days), up to 2 GPM.
• KDF85/Granulated Catalytic Activated Carbon removes up to 99% of chlorine and chloramines.

• 4 x 40 inch, FRP wrapped, low energy, commercial RO membranes.
• Typically used in RO systems with white PVC membrane housings in commercial and industrial series.
• Features genuine, OEM quality, thin film composite (TFC) membrane material for consistent results.
• Effective with tap or brackish water, including in nutrient reclaim systems.
• Made in the USA from an ISO 9001:2015 Certified Facility.
• 100% Quality and Performance Tested.

• Designed for use near the inlet and outlet of prefiltration media tanks.
• Provides operational pressure and pressure delta information.
• Features a liquid-filled pressure gauge for monitoring water pressure.
• Includes a labcock test port for easy access to water testing locations.
• 1-inch female slip fittings on inlet and outlet.

• Designed for use with commercial, industrial, and heavy-industrial RO systems.
• Suitable for anti-scalant, acid, or chlorine injection applications.
• Includes a 0.0-3 GPD adjustable peristaltic pump.
• Comes with a 15-gallon tank.
• Features a low-level shut-off float switch.
• Operates on 220V Single Phase 60Hz (0.9A).

• HydroLogic HyperLogic AS111 is a broad-spectrum anti-scalant concentrate.
• Designed for commercial, industrial, and heavy-industrial RO systems.
• Inhibits calcium carbonate scale build-up.
• Works effectively with HyperLogic Chemical Injector Systems.
• Prolongs membrane life.
• Cost-effective alternative to water softeners.
• Reduces system downtime and drain-to-waste from softener regeneration.

• Effectively removes silt, rust, dirt, and other suspended solids.
• Commonly used in industrial and heavy-industrial reverse osmosis (RO) systems.
• Installed in stainless steel housing before the RO unit.
• Provides OEM-level protection for costly equipment, including RO pumps.
• Helps extend the life of RO membranes.
• Filters have a 5-micron rating.
• Made of melt-blown polypropylene for ultra-fine filtration.
• Measures 2.5 x 20 inches.

• Helps remove calcium carbonate, hardness, iron, and mineral scale build-up from Industrial and Heavy-Industrial Series RO membranes.
• Regular membrane cleaning can extend membrane life, enhance permeate production, and optimize salt rejection.
• Membrane cleaning should be included in your site's SOP (standard operating procedure) for HyperLogic systems.
• Indicators for cleaning include lower permeate flow or reduced salt rejection from the RO.
• 25 lb pail.

• Achieves longer membrane life, increased permeate production, and optimal salt rejection.
• Cleaning should be part of the site's SOP (standard operating procedure) for HyperLogic systems.
• Indicators for cleaning include lower permeate flow, strong odors, or mold growth on the membrane scroll end.
• 25 lb pail.

Formerly HyperLogic HL 13564.

• Use the 1/4-inch OD tubing for micRO-75™, Stealth-RO™, or smallBoy®.
• Use the 3/8-inch OD tubing for Evolution-RO™ or Merlin-Garden Pro™.
• Length: 50 foot (15.24 meter) rolls.
• Colors: Black or Blue.

This float valve features a 3/8 in quick connect fitting and adjustable water level. Can be mounted vertically or horizontally. Stainless steel and PVC components. This float valve allows you to fill a reservoir or tank unattended to your desired water level. For use with the Evolution RO1000 Tall Boy™ or any other filter systems with 3/8 in tubing.

The Evolution RO1000™ KDF/Catalytic Carbon pre-filter is the standard carbon pre-filter included with system. For chlorine and chloramines reduction for city water. Also for well water for iron hydrogen sulfide and heavy metals reduction. The Evolution RO1000™ Membrane Element is the standard membrane included with system. 2 needed for system.

The Evolution RO1000™ KDF/Catalytic Carbon pre-filter is the standard carbon pre-filter included with system. For chlorine and chloramines reduction for city water. Also for well water for iron hydrogen sulfide and heavy metals reduction. The Evolution RO1000™ Membrane Element is the standard membrane included with system. 2 needed for system.

"Replacement fittings for Eco Plus Commercial 1/2 HP