ThermoFlo
ThermoFlo™ Back Draft Dampers
P_00497
- Designed to allow airflow in one direction.
- Minimum air leakage: exterior foam gaskets assure a tight seal.
- Aluminum spring-loaded backdraft damper blades.
- 20 gauge steel housing.
- Simple installation: entire assembly inserts into duct.
- Can be installed in any position: designed for vertical or horizontal mount.
- Specifically designed for use with ThermoFlo™ flexible ducting.
- Available in a range of sizes.
ThermoFlo Back Draft Damper 4" (10 cm)
Q100743
- Designed to allow airflow in one direction.
- Minimum air leakage: exterior foam gaskets assure a tight seal.
- Aluminum spring-loaded backdraft damper blades.
- 20 gauge steel housing.
- Simple installation: entire assembly inserts into duct.
- Can be installed in any position: designed for vertical or horizontal mount.
- Specifically designed for use with ThermoFlo™ flexible ducting.
- Size: 4 inches (10 centimeters).
ThermoFlo Back Draft Damper 6" (15 cm)
Q100744
- Designed to allow airflow in one direction.
- Minimum air leakage: exterior foam gaskets assure a tight seal.
- Aluminum spring-loaded backdraft damper blades.
- 20 gauge steel housing.
- Simple installation: entire assembly inserts into duct.
- Can be installed in any position: designed for vertical or horizontal mount.
- Specifically designed for use with ThermoFlo™ flexible ducting.
- Size: 6 inches (15 centimeters).
ThermoFlo Back Draft Damper 8" (20 cm)
Q100745
- Designed to allow airflow in one direction.
- Minimum air leakage: exterior foam gaskets assure a tight seal.
- Aluminum spring-loaded backdraft damper blades.
- 20 gauge steel housing.
- Simple installation: entire assembly inserts into duct.
- Can be installed in any position: designed for vertical or horizontal mount.
- Specifically designed for use with ThermoFlo™ flexible ducting.
- Size: 8 inches (20 centimeters).
ThermoFlo Back Draft Damper 10" (25 cm)
Q100746
- Designed to allow airflow in one direction.
- Minimum air leakage: exterior foam gaskets assure a tight seal.
- Aluminum spring-loaded backdraft damper blades.
- 20 gauge steel housing.
- Simple installation: entire assembly inserts into duct.
- Can be installed in any position: designed for vertical or horizontal mount.
- Specifically designed for use with ThermoFlo™ flexible ducting.
- Size: 10 inches (25 centimeters).
ThermoFlo Back Draft Damper 12" (30 cm)
Q100747
- Designed to allow airflow in one direction.
- Minimum air leakage: exterior foam gaskets assure a tight seal.
- Aluminum spring-loaded backdraft damper blades.
- 20 gauge steel housing.
- Simple installation: entire assembly inserts into duct.
- Can be installed in any position: designed for vertical or horizontal mount.
- Specifically designed for use with ThermoFlo™ flexible ducting.
- Size: 12 inches (30 centimeters).
ThermoFlo™ Duct Reducers
P_00502
- Easily reduce or increase duct diameter to suit requirements.
- Made with heavy-duty galvanized steel.
- Powder coated white.
- Designed for use with ThermoFlo™ flexible ducting.
- Available in a range of sizes.
ThermoFlo Duct Reducers 6" to 4" (15 to 10 cm)
Q100783
- Easily reduce or increase duct diameter to suit requirements.
- Made with heavy-duty galvanized steel.
- Powder coated white.
- Designed for use with ThermoFlo™ flexible ducting.
- Size: 6 inches to 4 inches (15 to 10 centimeters).
ThermoFlo Duct Reducers 6" to 5" (15 to 13 cm)
Q100784
- Easily reduce or increase duct diameter to suit requirements.
- Made with heavy-duty galvanized steel.
- Powder coated white.
- Designed for use with ThermoFlo™ flexible ducting.
- Size: 6 inches to 5 inches (15 to 13 centimeters).
ThermoFlo Duct Reducers 8" to 4" (20 to 10 cm)
Q100785
- Easily reduce or increase duct diameter to suit requirements.
- Made with heavy-duty galvanized steel.
- Powder coated white.
- Designed for use with ThermoFlo™ flexible ducting.
- Size: 8 inches to 4 inches (20 to 10 centimeters).
ThermoFlo Duct Reducers 8" to 6" (20 to 15 cm)
Q100786
- Easily reduce or increase duct diameter to suit requirements.
- Made with heavy-duty galvanized steel.
- Powder coated white.
- Designed for use with ThermoFlo™ flexible ducting.
- Size: 8 inches to 6 inches (20 to 15 centimeters).
ThermoFlo Duct Reducers 10" to 6" (25 to 15 cm)
Q100787
- Easily reduce or increase duct diameter to suit requirements.
- Made with heavy-duty galvanized steel.
- Powder coated white.
- Designed for use with ThermoFlo™ flexible ducting.
- Size: 10 inches to 6 inches (25 to 15 centimeters).
ThermoFlo Duct Reducers 10" to 8" (25 to 20 cm)
Q100788
- Easily reduce or increase duct diameter to suit requirements.
- Made with heavy-duty galvanized steel.
- Powder coated white.
- Designed for use with ThermoFlo™ flexible ducting.
- Size: 10 inches to 8 inches (25 to 20 centimeters).
ThermoFlo Duct Reducers 12" to 8" (30 to 20 cm)
Q100789
- Easily reduce or increase duct diameter to suit requirements.
- Made with heavy-duty galvanized steel.
- Powder coated white.
- Designed for use with ThermoFlo™ flexible ducting.
- Size: 12 inches to 8 inches (30 to 20 centimeters).
ThermoFlo Duct Reducers 12" to 10" (30 to 25 cm)
Q100790
- Easily reduce or increase duct diameter to suit requirements.
- Made with heavy-duty galvanized steel.
- Powder coated white.
- Designed for use with ThermoFlo™ flexible ducting.
- Size: 12 inches to 10 inches (30 to 25 centimeters).
ThermoFlo Duct Reducers 14" to 10" (38 cm to 25 cm)
Q100791
- Easily reduce or increase duct diameter to suit requirements.
- Made with heavy-duty galvanized steel.
- Powder coated white.
- Designed for use with ThermoFlo™ flexible ducting.
- Size: 14 inches to 10 inches (38 to 25 centimeters).
ThermoFlo™ T Connectors
P_00505
- Allows multiple ventilation areas to be accessed by a single inline-fan source or for several fans to join a single exhaust.
- The "T" shape makes it ideal for right-angle joins in large spaces.
- Made with heavy-duty galvanized steel and powder coated white.
- Specifically designed to be used with ThermoFlo flexible ducting.
- Available in a range of sizes.
ThermoFlo T Connector 4" x 4" x 4" (10 x 10 x 10 cm)
Q100792
- Allows multiple ventilation areas to be accessed by a single inline-fan source or for several fans to join a single exhaust.
- The "T" shape makes it ideal for right-angle joins in large spaces.
- Made with heavy-duty galvanized steel and powder coated white.
- Specifically designed to be used with ThermoFlo flexible ducting.
- Size: 4 x 4 x 4 inches (10 x 10 x 10 centimeters).
ThermoFlo T Connector 6" x 6" x 6" (15 x 15 x 15 cm)
Q100793
- Allows multiple ventilation areas to be accessed by a single inline-fan source or for several fans to join a single exhaust.
- The "T" shape makes it ideal for right-angle joins in large spaces.
- Made with heavy-duty galvanized steel and powder coated white.
- Specifically designed to be used with ThermoFlo flexible ducting.
- Size: 6 x 6 x 6 inches (15 x 15 x 15 centimeters).
ThermoFlo T Connector 8" x 8" x 8" (20 x 20 x 20 cm)
Q100794
- Allows multiple ventilation areas to be accessed by a single inline-fan source or for several fans to join a single exhaust.
- The "T" shape makes it ideal for right-angle joins in large spaces.
- Made with heavy-duty galvanized steel and powder coated white.
- Specifically designed to be used with ThermoFlo flexible ducting.
- Size: 8 x 8 x 8 inches (20 x 20 x 20 centimeters).
ThermoFlo T Connector 10" x 10" x 10" (25 x 25 x 25 cm)
Q100795
- Allows multiple ventilation areas to be accessed by a single inline-fan source or for several fans to join a single exhaust.
- The "T" shape makes it ideal for right-angle joins in large spaces.
- Made with heavy-duty galvanized steel and powder coated white.
- Specifically designed to be used with ThermoFlo flexible ducting.
- Size: 10 x 10 x 10 inches (25 x 25 x 25 centimeters).
ThermoFlo T Connector 12" x 12" x 12" (30 x 30 x 30 cm)
Q100796
- Allows multiple ventilation areas to be accessed by a single inline-fan source or for several fans to join a single exhaust.
- The "T" shape makes it ideal for right-angle joins in large spaces.
- Made with heavy-duty galvanized steel and powder coated white.
- Specifically designed to be used with ThermoFlo flexible ducting.
- Size: 12 x 12 x 12 inches (30 x 30 x 30 centimeters).
ThermoFlo™ Y Connectors
P_00506
- Allows multiple ventilation areas to be accessed by a single inline-fan source or for several fans to join a single exhaust.
- The “Y” shape makes it useful in areas with tight access angles.
- Made with heavy-duty galvanized steel and powder coated white.
- Specifically designed to be used with ThermoFlo flexible ducting.
- Available in a range of sizes.
ThermoFlo Y Connector 4" x 4" x 4" (10 x 10 x 10 cm)
Q100797
- Allows multiple ventilation areas to be accessed by a single inline-fan source or for several fans to join a single exhaust.
- The “Y” shape makes it useful in areas with tight access angles.
- Made with heavy-duty galvanized steel and powder coated white.
- Specifically designed to be used with ThermoFlo flexible ducting.
- Size: 4 x 4 x 4 inches (10 x 10 x 10 centimeters).