Growing Environment

The Gavita® Master Controller EL3 is the next generation in our EL controller series, designed to maximize the performance of your compatible fixtures. The EL3 enables you to set sunrise/sunset dimming, high-temperature dimming, and high-temperature shut-off for all connected fixtures. Best of all, the EL3 lets you build and program entire schedules for your growing cycles. When using a compatible Gavita or Sun System LED fixture, you will be able to view at the individual fixture level, how each one is performing.

• Connects Gavita® EL3 Master controller to first Titan Controls® VPD Sensor or Titan Controls® Substrate Sensor.
• Products then daisy chain together after this first connection.

Quick maintenance with easy filter access that is removable and washable. Low temperature defrosting. Easy to move with built-in handles and wheels. Easy-to-use LED display panel. Removable water tank with an automatic shutoff when reservoir is full. The reservoir for the dehumidifiers is 6 liters or 12.5 pints. 22 pint is 4.0 Amps/420 W. 30 pint is 4.7 Amps/520 W. 50 Pint is 6.9 Amps/720 W. 115 V. Can be plumbed for permanent drainage.

Quick maintenance with easy filter access that is removable and washable. Low temperature defrosting. Easy to move with built-in handles and wheels. Easy-to-use LED display panel. Removable water tank with an automatic shutoff when reservoir is full. The reservoir for the dehumidifiers is 6 liters or 12.5 pints. 22 pint is 4.0 Amps/420 W. 30 pint is 4.7 Amps/520 W. 50 Pint is 6.9 Amps/720 W. 115 V. Can be plumbed for permanent drainage.

Quick maintenance with easy filter access that is removable and washable. Low temperature defrosting. Easy to move with built-in handles and wheels. Easy-to-use LED display panel. Removable water tank with an automatic shutoff when reservoir is full. The reservoir for the dehumidifiers is 6 liters or 12.5 pints. 22 pint is 4.0 Amps/420 W. 30 pint is 4.7 Amps/520 W. 50 Pint is 6.9 Amps/720 W. 115 V. Can be plumbed for permanent drainage.

Quick maintenance with easy filter access that is removable and washable. Low temperature defrosting. Easy to move with built-in handles and wheels. Features a LED display panel. Removable water tank with an automatic shutoff when reservoir is full. Internal condensate pump for easy water disposal. Can also be plumbed for permanent drainage. Tank reservoir capacity is 10 liters or 21 pints. 7 Amps/680 W/271 CFM. 115 V.

This excellent quality humidifier features a multi-directional fogging head. The coverage is from 160–320 sq ft, depending on humidification requirements and ceiling height. Maximum output is 75 pints per day. Commercial-grade motor for years of use. Connects directly to your water supply with your own hookup (uses 1/4 in tubing). Operates at 62 dBA. Measures 12.2 in tall x 12.2 in diameter. 110 V/60 Hz/0.9 Amps. We recommend using a Titan Controls® Eos® 1 with this product!

Ideal-Air™ Pro Series 100 Pint Dehumidifier has automatic restart if power is lost. Easy-to-use digital display humidity readings, internal condensate pump, removable washable filter, 1 speed fan motor, powder-coated metal casing for long life and a heavy-duty compressor. Built-in defrost that is designed for operation down to 41°F. Set upright on their feet for 3 hrs prior to use. 100 pint unit: Temp. Range: 41°F–95°F, condensation removal: (24 hrs) 100 pints (86°F, 80% RH); Power: 6.75 Amps/728 W; Supply Voltage: 115 V - 1 Phase - 60 Hz; R410A. Ideal-Air recommends that dehumidifiers use surge protectors and a dedicated electrical circuit. In the event of a power failure, a spike in voltage may occur when the power is reinstated. This can damage the circuit board, which is not covered under warranty.

Ideal-Air™ Pro Series 180 Pint Dehumidifier has automatic restart if power is lost. Easy-to-use digital display humidity readings, internal condensate pump, removable washable filter, 1 speed fan motor, powder-coated metal casing for long life and a heavy-duty compressor. Built-in defrost that is designed for operation down to 41°F. Set upright on their feet for 3 hrs prior to use. 180 pint unit: Temp. Range: 41°F–95°F, condensation removal: (24 hrs) 180 pints (86°F, 80% RH); Power: 12.31 Amps/1350 W; Supply Voltage: 115 V - 1 Phase - 60 Hz; R410A. Ideal-Air™ recommends that dehumidifiers use surge protectors and a dedicated electrical circuit. In the event of a power failure, a spike in voltage may occur when the power is reinstated. This can damage the circuit board, which is not covered under warranty.

The Ideal-Air™ Pro Series Ultra Sonic Humidifier is designed with ultra-sonic transducers to supply ultra-fine water particles. This is to help form a more balanced humidity field over your plant's entire canopy. Ideal-Air™ Pro Series Ultra Sonic Humidifier plates are made from cold-rolled steel and a stainless steel box with a standard water inlet with overflow safety switch, reservoir drain outlet, sediment filter, LED display and humidity control (30%–90%). This unit is designed to produce up to 150 pints per day of ultra-fine mist. 115 V, 60 Hz and 2.7 Amps. We recommend all Ultra Sonic Humidifiers be ducted, using 4 in PVC or 4 in DWV plastic pipe works best. Units should not be run without ducting or the top of the unit may be covered in water and shut off. Please don’t fill the unit through the discharge piping outlets. Doing this will overfill the tank and prevent the unit from creating humidity. The unit should only be filled through the provided hose and float valve to ensure proper water level and correct operation.

The Ideal-Air™ Pro Series Ultra Sonic Humidifier is designed with ultra-sonic transducers to supply ultra-fine water particles. This is to help form a more balanced humidity field over your plant's entire canopy. Ideal-Air™ Pro Series Ultra Sonic Humidifier plates are made from cold-rolled steel and a stainless steel box with a standard water inlet with overflow safety switch, reservoir drain outlet, sediment filter, LED display and humidity control (30%–90%). This unit is designed to produce up to 300 pints per day of ultra-fine mist. 115 V, 60 Hz and 7.8 Amps. We recommend all Ultra Sonic Humidifiers be ducted, using 4 in PVC or 4 in DWV plastic pipe works best. Units should not be run without ducting or the top of the unit may be covered in water and shut off. Please don’t fill the unit through the discharge piping outlets. Doing this will overfill the tank and prevent the unit from creating humidity. The unit should only be filled through the provided hose and float valve to ensure proper water level and correct operation.

The Ideal-Air™ Pro Series Ultra Sonic Humidifier is designed with ultra-sonic transducers to supply ultra-fine water particles. This is to help form a more balanced humidity field over your plant's entire canopy. Ideal-Air™ Pro Series Ultra Sonic Humidifier plates are made from cold-rolled steel and a stainless steel box with a standard water inlet with overflow safety switch, reservoir drain outlet, sediment filter, LED display and humidity control (30%–90%). This unit is designed to produce up to 600 pints per day of ultra-fine mist. 115 V, 60 Hz and 10.3 Amps. We recommend all Ultra Sonic Humidifiers be ducted, using 4 in PVC or 4 in DWV plastic pipe works best. Units should not be run without ducting or the top of the unit may be covered in water and shut off. Please don’t fill the unit through the discharge piping outlets. Doing this will overfill the tank and prevent the unit from creating humidity. The unit should only be filled through the provided hose and float valve to ensure proper water level and correct operation.

The Titan Controls™ grow room sensors are designed for the grower in mind. For use with the Gavita™ EL3 Controller (sold separately and requires Titan Sensor Adapter Cable), they provide accurate environmental data and historical conditions that allow growers to further enhance and optimize their growing room.

The Titan Controls™ Tali™ 3 in 1 VPD Sensor is designed to accurately measure the temperature, humidity, and air pressure of your growing environment. Using these readings, it will accurately calculate the VPD (vapor pressure deficit) for the monitored area. An easy-to-read LED screen allows you to quickly see what’s going on in your environment.

The Titan Controls™ Triton™ Standard Substrate Sensor is designed to accurately measure the EC (electrical conductivity), VWC (volumetric water content), and temperature of your substrate (growing media). Understanding these three metrics will allow you to optimize your irrigation strategy to realize your plants' full potential. The compact design allows this sensor to be easily installed in most applications.

The Titan Controls™ Tali™ 3 in 1 VPD Sensor is designed to accurately measure the temperature, humidity, and air pressure of your growing environment. Using these readings, it will accurately calculate the VPD (vapor pressure deficit) for the monitored area. An easy-to-read LED screen allows you to quickly see what’s going on in your environment.

The Titan Controls™ Triton™ Standard Substrate Sensor is designed to accurately measure the EC (electrical conductivity), VWC (volumetric water content), and temperature of your substrate (growing media). Understanding these three metrics will allow you to optimize your irrigation strategy to realize your plants' full potential. The compact design allows this sensor to be easily installed in most applications.

• Ideal for residential, commercial, and industrial applications.
• Easy to install inline configuration, compatible with variable speed controllers.
• Designed to overcome resistance from long ducting; works with flexible and rigid ducting.
• Permanently lubricated for maintenance-free and continuous operation.
• Balanced fan and motor assembly for quiet, vibration-free performance.
• Features infinitely variable airflow with available 3-wire solid-state speed control.
• Suitable for light dust and fumes.
• Heavy-gauge, spun steel housing with baked epoxy finish inside and outside.
• Backward curved blades for low sound and ample static pressure.
• Durable external rotor motor with thermal reset overload protection.
• Pre-wired with 120-volt power cords.

• Ideal for residential, commercial, and industrial applications.
• Easy to install inline configuration, compatible with variable speed controllers.
• Designed to overcome resistance from long ducting; works with flexible and rigid ducting.
• Permanently lubricated for maintenance-free and continuous operation.
• Balanced fan and motor assembly for quiet, vibration-free performance.
• Features infinitely variable airflow with available 3-wire solid-state speed control.
• Suitable for light dust and fumes.
• Heavy-gauge, spun steel housing with baked epoxy finish inside and outside.
• Backward curved blades for low sound and ample static pressure.
• Durable external rotor motor with thermal reset overload protection.
• Pre-wired with 120-volt power cords.
• 4 in (10 cm) 152 CFM inline duct fan.

• Ideal for residential, commercial, and industrial applications.
• Easy to install inline configuration, compatible with variable speed controllers.
• Designed to overcome resistance from long ducting; works with flexible and rigid ducting.
• Permanently lubricated for maintenance-free and continuous operation.
• Balanced fan and motor assembly for quiet, vibration-free performance.
• Features infinitely variable airflow with available 3-wire solid-state speed control.
• Suitable for light dust and fumes.
• Heavy-gauge, spun steel housing with baked epoxy finish inside and outside.
• Backward curved blades for low sound and ample static pressure.
• Durable external rotor motor with thermal reset overload protection.
• Pre-wired with 120-volt power cords.
• 5 in (13 cm) 212 CFM inline duct fan.

• Ideal for residential, commercial, and industrial applications.
• Easy to install inline configuration, compatible with variable speed controllers.
• Designed to overcome resistance from long ducting; works with flexible and rigid ducting.
• Permanently lubricated for maintenance-free and continuous operation.
• Balanced fan and motor assembly for quiet, vibration-free performance.
• Features infinitely variable airflow with available 3-wire solid-state speed control.
• Suitable for light dust and fumes.
• Heavy-gauge, spun steel housing with baked epoxy finish inside and outside.
• Backward curved blades for low sound and ample static pressure.
• Durable external rotor motor with thermal reset overload protection.
• Pre-wired with 120-volt power cords.
• 6 in (15 cm) 247 CFM inline duct fan.

• Patented design, precisely monitors temperature and humidity levels inside the Mondi™ Mini Greenhouse or other environments
• Comes in black, green, orange, and white.
• Provides growers with real-time temperature and humidity data and eliminates the need to open the dome for readings.
• Ideal for successful large-scale propagation of seedlings and cuttings.
• Includes a proprietary 8 mm (0.315 inch) drill piece, placement sticker, and product information guide.
• Dimensions (LxWxH): 4.1 x 0.3 x 1.2 in (10.41 x 0.76 x 3.05 cm).

• Patented design, precisely monitors temperature and humidity levels inside the Mondi™ Mini Greenhouse or other environments
• Provides growers with real-time temperature and humidity data and eliminates the need to open the dome for readings.
• Ideal for successful large-scale propagation of seedlings and cuttings.
• Includes a proprietary 8 mm (0.315 inch) drill piece, placement sticker, and product information guide.
• Color: Black.
• Dimensions (LxWxH): 4.1 x 0.3 x 1.2 in (10.41 x 0.76 x 3.05 cm).

• Patented design, precisely monitors temperature and humidity levels inside the Mondi™ Mini Greenhouse or other environments
• Provides growers with real-time temperature and humidity data and eliminates the need to open the dome for readings.
• Ideal for successful large-scale propagation of seedlings and cuttings.
• Includes a proprietary 8 mm (0.315 inch) drill piece, placement sticker, and product information guide.
• Color: Green.
• Dimensions (LxWxH): 4.1 x 0.3 x 1.2 in (10.41 x 0.76 x 3.05 cm).

• Patented design, precisely monitors temperature and humidity levels inside the Mondi™ Mini Greenhouse or other environments
• Provides growers with real-time temperature and humidity data and eliminates the need to open the dome for readings.
• Ideal for successful large-scale propagation of seedlings and cuttings.
• Includes a proprietary 8 mm (0.315 inch) drill piece, placement sticker, and product information guide.
• Color: Orange.
• Dimensions (LxWxH): 4.1 x 0.3 x 1.2 in (10.41 x 0.76 x 3.05 cm).

• Patented design, precisely monitors temperature and humidity levels inside the Mondi™ Mini Greenhouse or other environments
• Provides growers with real-time temperature and humidity data and eliminates the need to open the dome for readings.
• Ideal for successful large-scale propagation of seedlings and cuttings.
• Includes a proprietary 8 mm (0.315 inch) drill piece, placement sticker, and product information guide.
• Color: White.
• Dimensions (LxWxH): 4.1 x 0.3 x 1.2 in (10.41 x 0.76 x 3.05 cm).