Growing Environment

• Stainless steel clamps for attaching ducting.
• Make for clean and attractive duct connection.
• Simple to use.
• Size: 8 inches (20 centimeters).

• Stainless steel clamps for attaching ducting.
• Make for clean and attractive duct connection.
• Simple to use.
• Size: 10 inches (25 centimeters).

• Stainless steel clamps for attaching ducting.
• Make for clean and attractive duct connection.
• Simple to use.
• Size: 12 inches (30 centimeters).

• Stainless steel clamps for attaching ducting.
• Make for clean and attractive duct connection.
• Simple to use.
• Size: 14 inches (38 centimeters).

• Connects two segments of round duct together.
• Ideal where added stability and sealing is required.
• Required when passing ventilation through a wall.
• Easily installed.
• Crafted with powder-coated heavy-duty galvanized steel.
• Designed for use with ThermoFlo flexible ducting.
• Size: 4 inches (10 centimeters).

Each Original Can-Filter® uses the most conceptually sound, granular carbon, packed-bed design to deliver the best performing carbon filter on the market. Even with the industry's thickest carbon bed, at 2.5 inches, the Can Original provides for some of the lowest pressure drops, even on smaller size filters. This hefty granular carbon bed effectively makes the Original filter the biggest sponge for VOC removal capable of holding massive amounts of contaminant leading to a lifespan that leaves other filters, frankly, in the dust. The Original Can-Filter are designed for the control of VOCs (paint fumes, hydrocarbons, etc...), odors and other gaseous contaminants. Built with the same proven packed bed design and granular virgin activated carbon we've used for 30 years, this line of time tested activated carbon air filters sets the standard for long life, consistent performance and low pressure drop. Rated at a conservative 0.1 sec contact time, the Original Can-Filter provide excellent value and confidence.

The flange is used to connect the Can-Filter® to the ducting or Can-Fan®; this is for airflow out of the ventilated area. These spun steel flanges come with a foam rubber seal and 6 hex drive self-tapping screws forming a perfect seal with Can-Filter products. Flanges range in size from 4 in to 20 in depending on your specific needs.

• Connects Gavita® EL3 Master controller to first Titan Controls® VPD Sensor or Titan Controls® Substrate Sensor.
• Products then daisy chain together after this first connection.

This excellent quality humidifier features a multi-directional fogging head. The coverage is from 160–320 sq ft, depending on humidification requirements and ceiling height. Maximum output is 75 pints per day. Commercial-grade motor for years of use. Connects directly to your water supply with your own hookup (uses 1/4 in tubing). Operates at 62 dBA. Measures 12.2 in tall x 12.2 in diameter. 110 V/60 Hz/0.9 Amps. We recommend using a Titan Controls® Eos® 1 with this product!

The Ideal-Air™ Pro Series Ultra Sonic Humidifier is designed with ultra-sonic transducers to supply ultra-fine water particles. This is to help form a more balanced humidity field over your plant's entire canopy. Ideal-Air™ Pro Series Ultra Sonic Humidifier plates are made from cold-rolled steel and a stainless steel box with a standard water inlet with overflow safety switch, reservoir drain outlet, sediment filter, LED display and humidity control (30%–90%). This unit is designed to produce up to 600 pints per day of ultra-fine mist. 115 V, 60 Hz and 10.3 Amps. We recommend all Ultra Sonic Humidifiers be ducted, using 4 in PVC or 4 in DWV plastic pipe works best. Units should not be run without ducting or the top of the unit may be covered in water and shut off. Please don’t fill the unit through the discharge piping outlets. Doing this will overfill the tank and prevent the unit from creating humidity. The unit should only be filled through the provided hose and float valve to ensure proper water level and correct operation.

CO₂ is scientifically proven to improve the performance of plants! The Ares® Series CO₂ generators provide a clean and efficient way to enrich your grow area with CO₂. Ares® Series CO₂ generators come with everything you need to get your CO₂ system started. Includes: CO₂ generator, AC power supply, hanging chain, ceiling hook, appropriate hose and regulator. All you need to provide is a gas source! 1.5 Amps/120 V/ 60 Hz.

CO₂ is scientifically proven to improve the performance of plants! The Ares® Series CO₂ generators provide a clean and efficient way to enrich your grow area with CO₂. Ares® Series CO₂ generators come with everything you need to get your CO₂ system started. Includes: CO₂ generator, AC power supply, hanging chain, ceiling hook, appropriate hose and regulator. All you need to provide is a gas source! 1.5 Amps/120 V/ 60 Hz.

• Connects two segments of round duct together.
• Ideal where added stability and sealing is required.
• Required when passing ventilation through a wall.
• Easily installed.
• Crafted with powder-coated heavy-duty galvanized steel.
• Designed for use with ThermoFlo flexible ducting.
• Size: 6 inches (15 centimeters).

• Connects two segments of round duct together.
• Ideal where added stability and sealing is required.
• Required when passing ventilation through a wall.
• Easily installed.
• Crafted with powder-coated heavy-duty galvanized steel.
• Designed for use with ThermoFlo flexible ducting.
• Size: 8 inches (20 centimeters).

• Connects two segments of round duct together.
• Ideal where added stability and sealing is required.
• Required when passing ventilation through a wall.
• Easily installed.
• Crafted with powder-coated heavy-duty galvanized steel.
• Designed for use with ThermoFlo flexible ducting.
• Size: 10 inches (25 centimeters).

• High-output in-duct corona discharge (CD) generator.
• Generates ozone, one of nature’s most effective oxidizing agents.
• Ideal for rooms from 40,000 cu.ft. (1,200 m³) up to 100,000 cu.ft. (3,000 m³).
• Installs into 12 inch (30 cm) ducts to treat the air as it is being exhausted.
• Adjustable (high/low/off) switch.
• Works in areas of high humidity and wide temperature ranges.
• Environmentally-friendly; creates no hazardous waste.
• No maintenance required.

• Connects two segments of round duct together.
• Ideal where added stability and sealing is required.
• Required when passing ventilation through a wall.
• Easily installed.
• Crafted with powder-coated heavy-duty galvanized steel.
• Designed for use with ThermoFlo flexible ducting.
• Size: 12 inches (30 centimeters).

• Designed for ventilation applications including HVAC, dryer, grow rooms and tents.
• Four layer design makes it more durable and resistant to leaks, tears, and cuts.
• Steel-wire spiral structure is flexible and easy-to-install in hard to reach places.
• Constructed of Aluminum and thermoplastic, tube can be shortened for various applications.
• Ducting size: 6 inches (15 centimeters).
• Length: 25 feet (7.6 meters).
• Includes two stainless steel 6 inch duct clamps.

• Designed for ventilation applications including HVAC, dryer, grow rooms and tents.
• Four layer design makes it more durable and resistant to leaks, tears, and cuts.
• Steel-wire spiral structure is flexible and easy-to-install in hard to reach places.
• Constructed of Aluminum and thermoplastic, tube can be shortened for various applications.
• Ducting size: 8 inches (20 centimeters).
• Length: 25 feet (7.6 meters).
• Includes two stainless steel 8 inch duct clamps.

• Designed for ventilation applications including HVAC, dryer, grow rooms and tents.
• Four layer design makes it more durable and resistant to leaks, tears, and cuts.
• Steel-wire spiral structure is flexible and easy-to-install in hard to reach places.
• Constructed of Aluminum and thermoplastic, tube can be shortened for various applications.
• Ducting size: 4 inches (10 centimeters).
• Length: 25 feet (7.6 meters).
• Includes two stainless steel 4 inch duct clamps.

• A high-airflow exhaust fan designed to ventilate out heat, moisture, odor, and dust from various spaces.
• Features an 8-speed manual controller utilizing PWM. See T-Series for temperature and humidity controls.
• Innovative EC-motor with PWM-control maximizes airflow while reducing energy consumption and noise levels.
• Features galvanized-steel shutters, aluminum blades, and IP-44 rated to be highly resistant to liquid and dust.
• Fan Size: 14 in.
• Dimensions: 16.93 x 16.93 x 6.42 in.
• Airflow: 2,418 CFM.
• Noise: 68 dBA.
• Bearings: Dual Ball.

• Commercial and Industrial Use: The Quest 335 277V dehumidifier is designed for facilities with 277V outlets, using less amperage and freeing up electricity for other equipment.
• Advanced Dehumidifier Technology: Features patented M-CoRR Technology, which recycles excess heat for high efficiency and reduced heat output.
• Improved Air Quality: Equipped with MERV-13 filtration, which is significantly more effective at capturing harmful particulates, ensuring a cleaner and healthier environment.

@ 80°F | 60% RH

• Capacity: 345 Pints/Day.
• Efficiency: 8.0 Pints/kWh.
• Supply Voltage: 277 V.
• Current Draw: 6.3 Amps.

• A digital controller designed to equip AC Infinity devices with smart controls to produce the optimal environment.
• Control up to four devices from fans to grow lights and provide each with their own independent programming.
• Automate devices to dynamically change speed and brightness levels in response to temperature and humidity.
• Additional programming includes grow cycles, scheduling, timers, minimum levels, and custom transitions.
• Connect with our app via Bluetooth to unlock advance programs, set alarms, notifications, and view climate data.

• A duct muffler designed for use with inline fans in grow tents, bathroom fans and other HVAC applications.
• Features dual aluminum flanges to help absorb sound waves from fan vibrations and airflow.
• High-quality neoprene foam in an egg crate pattern that will reduce fan noise by up to 50%.
• Galvanized steel body that is corrosion-resistant and can withstand extreme temperatures.
• Duct Opening Diameter: 4 inches (10 centimeters).
• Length: 15 inches (38.1 centimeters).
• Weight: 2.30 pounds (1.04 kilograms).

• A duct muffler designed for use with inline fans in grow tents, bathroom fans and other HVAC applications.
• Features dual aluminum flanges to help absorb sound waves from fan vibrations and airflow.
• High-quality neoprene foam in an egg crate pattern that will reduce fan noise by up to 50%.
• Galvanized steel body that is corrosion-resistant and can withstand extreme temperatures.
• Duct Opening Diameter: 8 inches (20 centimeters).
• Length: 27 inches (68.5 centimeters).
• Weight: 6.00 pounds (2.7 kilograms).

• Conveniently packaged in aerosol cans.
• Releases a quick burst of powerful odor-neutralizing solution.
• Perfect for various spaces like garages, kitchens, and bathrooms.
• Effectively eliminates unpleasant or unwanted airborne odors.
• Can be used alone or with the ONA Mist Dispenser.
• Fresh Linen scent.
• 170 gram (6 ounce) can.

• A fan controller designed to enable wireless speed control in AC Infinity fans for HVAC or growing.
• Remotely adjusts fan speed using PWM controls to produce optimal airflow and manage fan noise.
• 10-speed programming featuring white LED indicators and backup memory that retains speed settings.
• Control many fans simultaneously when pairing the remote with additional receivers (sold separately).
• Fits the following AC Infinity EC motor fans: CLOUDLINE, AIRLIFT, CLOUDWAY, and CLOUDLIFT Series.