Growing Environment

• Designed for ventilation applications including HVAC, dryer, grow rooms and tents.
• Four layer design makes it more durable and resistant to leaks, tears, and cuts.
• Steel-wire spiral structure is flexible and easy-to-install in hard to reach places.
• Constructed of Aluminum and thermoplastic, tube can be shortened for various applications.
• Ducting size: 4 inches (10 centimeters).
• Length: 25 feet (7.6 meters).
• Includes two stainless steel 4 inch duct clamps.

• For use with Ona Mist aerosol cans.
• Controls difficult or repetitive odors in small spaces.
• Has an electronic eye that senses bright light or low light.
• Three settings for low light, day light, or 24-hour operation.
• Adjustable time intervals: 7.5 minutes, 15 minutes, or 30 minutes.

• Classic series oscillating wall mount fan.
• Designed for efficient air circulation in compact spaces.
• Ideal for growrooms, greenhouses, homes, garages, workshops, and more.
• Three turn-switch or pull-cord controlled speed settings.
• 90 degree lockable oscillation.
• Durable steel neck support.
• 5 foot (1.5 meter) power cord.
• cETL listed.
• 16 inch (40 centimeter) fan.

• Designed for efficient air circulation in compact spaces.
• Ideal for growrooms, greenhouses, homes, garages, workshops, and more.
• Three dial- or pull-cord controlled speed settings.
• Multi-position tilt.
• 90 degree lockable oscillation.
• Powder-coated steel grill.
• Chemical-resistant polypropylene fan blade.
• cETL listed.
• 18 inch (45 centimeter) fan.

• May be mounted on the exterior of a building.
• Enclosed motor housing for dust and lint.
• Suitable for air temperatures up to 140°F / 60°C.
• Energy efficient; speed controllable (optional solid state speed control).
• Heavy gauge, galvanized steel housing with baked epoxy finish; rugged construction for long life.
• Built-in backdraft damper.
• Exceptionally quiet and efficient BC centrifugal motorized impeller.
• External rotor motor design results in superior motor cooling and durability.
• Permanently lubricated ball bearing motor for maintenance-free operation.
• Automatic reset thermal overload protection.
• Fan and motor are precision balanced for quiet and vibration-free operation.
• Pre-wired capacitor.
• 120 V operation.
• 4 in (10 cm) 177 CFM external mount duct fan.

Quest Replacement Air Filter for PowerDry 4000 and Dual 105, 155, 205, and 225 Only Models - for CDG 174.

Can-Filter® has designed and built the Can-Lite™ for convenience and long life. 100% Australian Granulated carbon, aluminum top and bottom, integrated flange and 51% open perforation are features of the Can-Lite filter. The Can-Lite is available in 12 sizes with a CFM range of 89 - 3000. Can-Lite is manufactured in a dedicated carbon filter plant in North America. Each filter is shrink wrapped, boxed and labeled for ease of use.

Can-Filter® has designed and built the Can-Lite™ for convenience and long life. 100% Australian Granulated carbon, aluminum top and bottom, integrated flange and 51% open perforation are features of the Can-Lite filter. The Can-Lite is available in 12 sizes with a CFM range of 89 - 3000. Can-Lite is manufactured in a dedicated carbon filter plant in North America. Each filter is shrink wrapped, boxed and labeled for ease of use.

Can-Filter® has designed and built the Can-Lite™ for convenience and long life. 100% Australian Granulated carbon, aluminum top and bottom, integrated flange and 51% open perforation are features of the Can-Lite filter. The Can-Lite is available in 12 sizes with a CFM range of 89 - 3000. Can-Lite is manufactured in a dedicated carbon filter plant in North America. Each filter is shrink wrapped, boxed and labeled for ease of use.

Can-Filter® has designed and built the Can-Lite™ for convenience and long life. 100% Australian Granulated carbon, aluminum top and bottom, integrated flange and 51% open perforation are features of the Can-Lite filter. The Can-Lite is available in 12 sizes with a CFM range of 89 - 3000. Can-Lite is manufactured in a dedicated carbon filter plant in North America. Each filter is shrink wrapped, boxed and labeled for ease of use.

Each Original Can-Filter® uses the most conceptually sound, granular carbon, packed-bed design to deliver the best performing carbon filter on the market. Even with the industry's thickest carbon bed, at 2.5 inches, the Can Original provides for some of the lowest pressure drops, even on smaller size filters. This hefty granular carbon bed effectively makes the Original filter the biggest sponge for VOC removal capable of holding massive amounts of contaminant leading to a lifespan that leaves other filters, frankly, in the dust. The Original Can-Filter are designed for the control of VOCs (paint fumes, hydrocarbons, etc...), odors and other gaseous contaminants. Built with the same proven packed bed design and granular virgin activated carbon we've used for 30 years, this line of time tested activated carbon air filters sets the standard for long life, consistent performance and low pressure drop. Rated at a conservative 0.1 sec contact time, the Original Can-Filter provide excellent value and confidence.

Each Original Can-Filter® uses the most conceptually sound, granular carbon, packed-bed design to deliver the best performing carbon filter on the market. Even with the industry's thickest carbon bed, at 2.5 inches, the Can Original provides for some of the lowest pressure drops, even on smaller size filters. This hefty granular carbon bed effectively makes the Original filter the biggest sponge for VOC removal capable of holding massive amounts of contaminant leading to a lifespan that leaves other filters, frankly, in the dust. The Original Can-Filter are designed for the control of VOCs (paint fumes, hydrocarbons, etc...), odors and other gaseous contaminants. Built with the same proven packed bed design and granular virgin activated carbon we've used for 30 years, this line of time tested activated carbon air filters sets the standard for long life, consistent performance and low pressure drop. Rated at a conservative 0.1 sec contact time, the Original Can-Filter provide excellent value and confidence.

Each Original Can-Filter® uses the most conceptually sound, granular carbon, packed-bed design to deliver the best performing carbon filter on the market. Even with the industry's thickest carbon bed, at 2.5 inches, the Can Original provides for some of the lowest pressure drops, even on smaller size filters. This hefty granular carbon bed effectively makes the Original filter the biggest sponge for VOC removal capable of holding massive amounts of contaminant leading to a lifespan that leaves other filters, frankly, in the dust. The Original Can-Filter are designed for the control of VOCs (paint fumes, hydrocarbons, etc...), odors and other gaseous contaminants. Built with the same proven packed bed design and granular virgin activated carbon we've used for 30 years, this line of time tested activated carbon air filters sets the standard for long life, consistent performance and low pressure drop. Rated at a conservative 0.1 sec contact time, the Original Can-Filter provide excellent value and confidence.

The flange is used to connect the Can-Filter® to the ducting or Can-Fan®; this is for airflow out of the ventilated area. These spun steel flanges come with a foam rubber seal and 6 hex drive self-tapping screws forming a perfect seal with Can-Filter products. Flanges range in size from 4 in to 20 in depending on your specific needs.

The flange is used to connect the Can-Filter® to the ducting or Can-Fan®; this is for airflow out of the ventilated area. These spun steel flanges come with a foam rubber seal and 6 hex drive self-tapping screws forming a perfect seal with Can-Filter products. Flanges range in size from 4 in to 20 in depending on your specific needs.

The flange is used to connect the Can-Filter® to the ducting or Can-Fan®; this is for airflow out of the ventilated area. These spun steel flanges come with a foam rubber seal and 6 hex drive self-tapping screws forming a perfect seal with Can-Filter products. Flanges range in size from 4 in to 20 in depending on your specific needs.

The flange is used to connect the Can-Filter® to the ducting or Can-Fan®; this is for airflow out of the ventilated area. These spun steel flanges come with a foam rubber seal and 6 hex drive self-tapping screws forming a perfect seal with Can-Filter products. Flanges range in size from 4 in to 20 in depending on your specific needs.

Very low air resistance, easily changed. MERV-5 mesh blocks pollen, dust and other particulate from entering filter. Available in sizes for all filters. A clean Can-Filter® Pre-Filter is an excellent way of extending the working life of your Can-Filter filter.

Very low air resistance, easily changed. MERV-5 mesh blocks pollen, dust and other particulate from entering filter. Available in sizes for all filters. A clean Can-Filter® Pre-Filter is an excellent way of extending the working life of your Can-Filter filter.

Very low air resistance, easily changed. MERV-5 mesh blocks pollen, dust and other particulate from entering filter. Available in sizes for all filters. A clean Can-Filter® Pre-Filter is an excellent way of extending the working life of your Can-Filter filter.

Can-Filters® has designed and built the Can-Lite™ for convenience and long life. 100% Australian granulated carbon, aluminum top and bottom, integrated flange and 51% open perforation are features of the Can-Lite filter. The Can-Lite is available in 7 sizes with a CFM range of 89 to 3000. Can-Lite is manufactured in a dedicated carbon filter plant in North America. Each filter is shrink wrapped, boxed and labeled for ease of use.

Can-Filters® has designed and built the Can-Lite™ for convenience and long life. 100% Australian granulated carbon, aluminum top and bottom, integrated flange and 51% open perforation are features of the Can-Lite filter. The Can-Lite is available in 7 sizes with a CFM range of 89 to 3000. Can-Lite is manufactured in a dedicated carbon filter plant in North America. Each filter is shrink wrapped, boxed and labeled for ease of use.

Can-Filters® has designed and built the Can-Lite™ for convenience and long life. 100% Australian granulated carbon, aluminum top and bottom, integrated flange and 51% open perforation are features of the Can-Lite filter. The Can-Lite is available in 7 sizes with a CFM range of 89 to 3000. Can-Lite is manufactured in a dedicated carbon filter plant in North America. Each filter is shrink wrapped, boxed and labeled for ease of use.

Can-Filters® has designed and built the Can-Lite™ for convenience and long life. 100% Australian granulated carbon, aluminum top and bottom, integrated flange and 51% open perforation are features of the Can-Lite filter. The Can-Lite is available in 7 sizes with a CFM range of 89 to 3000. Can-Lite is manufactured in a dedicated carbon filter plant in North America. Each filter is shrink wrapped, boxed and labeled for ease of use.