Search
Canadian Dollar
All Categories
    Menu Close

    LightEnerG

    View as Grid List
    Sort by
    Q100923.jpg

    LightEnerG™ Pro Light T5 Lighting Kits

    P_00418
    • Extremely efficient low-heat horticultural lighting systems.
    • T5 Super High Output (SHO) lighting provides an ideal spectrum for plant growth.
    • Minimal heat output allows placement 6 to 8 in (15.24 to 20.32 cm) above plant canopy.
    • No risk of scorching leaves, unlike MH lighting.
    • Closer placement maximizes photosynthetic response and promotes fuller growth at lower wattage.
    • Includes T5 SHO grow bulbs, built-in ballast, hanging hardware, and 12-foot (3.7-meter) grounded power cord.
    • Two-year rebuild or replace warranty.
    • ETL approved.
    • Available in a variety of sizes.
    Q100927.jpg

    LightEnerG™ Pro Light T5 High Output (HO) Grow Bulbs

    P_00419
    • Designed to be used with LightEnerG Pro Light T5 HO Kits.
    • Cost-efficient bulbs ideal for starting plants from seeds or cuttings.
    • Can be used to add extra light during the fruiting and flowering stage.
    Q100936.jpg

    LightEnerG™ Premium Switchable Ballast Kits

    P_00315
    • Can easily switch between MH and HPS bulbs by flipping a specialized switch.
    • Also switchable between 120 V and 240 V.
    • Use provided 120 V cord or 240 V cord (sold separately).
    • No additional wiring is necessary.
    • The aluminum housing dissipates heat and keeps components cool.
    • Includes a top-of-the-line Aerovox® capacitor.
    • Lamp cord receptacle accepts all LightEnerG lamp cords and reflectors.
    Q100935.jpg

    LightEnerG™ Premium Ballast Kits

    P_00313
    • Magnetic ballast capable of switching between 120 V and 240 V.
    • Use either the 120v or a 240v power cord (sold separately) to change the voltage of the ballast.
    • No additional wiring is necessary.
    • Can also be used with 600 W MH conversion lamps.
    • Aluminum housing is specially designed to dissipate heat and keep components cool.
    • Includes a top-of-the-line Aerovox® capacitor.
    • Lamp cord receptacle accepts all LightEnerG lamp cords and reflectors.
    Q100939.jpg

    LightEnerG™ Bare Ballasts

    P_00299
    • UL certified ballast units.
    • North American made capacitor.
    • Quad-tap (120 V, 208 V, 240 V, and 277 V).
    • Must be assembled by a qualified electrician.
    Q100942.jpg

    LightEnerG™ The ACE™ Replacement Fuses

    P_00489

    Replacement fuses for The ACEâ„¢ Digital Ballast.

    Q100945.jpg

    LightEnerG™ The ACE™ Electronic Digital Ballasts

    P_00488
    • State-of-the-art, UL-approved electronic ballasts.
    • Compatible with both MH and HPS bulbs.
    • Features a dimmable switch with the ability to adjust watt output for three different settings.
    • Has carefully arranged circuit boards and stainless steel ball bearing fans.
    • Runs 15% cooler than standard ballasts, ensuring longer life and improved performance.
    • Generator-ready with the most stable output frequency of any comparable ballast.
    • Results in lower power loss and better overall power management.
    • Has a power factor of 99.9% for 100% of the time.
    • Far more efficient than older core and coil ballasts.
    Q100949.jpg

    LightEnerG™ Mogul Sockets

    P_00311
    • Premium 600 V, 1500 W, 5KV-pulse-rated porcelain mogul base sockets.
    • Accommodate all mogul base bulbs in a universal position.
    • Mogul cap and washer are included.
    • Available with leads or without leads.
    Q100954.jpg

    LightEnerG™ Premium Cord & Mogul Socket Set Assemblies

    P_00314
    • Comes with a universal position mogul socket.
    • Mounted to an engineered and modified powder-coated octagonal wire box with a hanger.
    • Lamp cord includes a LightEnerG Wire Strain Relief for added durability.
    • Plug the male end into a LightEnerG ballast and add the appropriate lamp and reflector.
    Q100957.jpg

    LightEnerG™ Econo Cord & Mogul Socket Set Assemblies

    P_00305
    • Comes with a universal position mogul socket with a hanger.
    • Lamp cord includes LightEnerG wire strain relief for added durability.
    Q100962.jpg

    LightEnerG™ Male Power Cord with Bare Wire End (120 V)

    P_00296
    • Bare-wire-end male power cords.
    • Used between a ballast and a power outlet.
    Q100964.jpg

    LightEnerG™ Ballast Power Cords

    P_00298
    • High quality plugs securely connect to any IEC14 ballast.
    • Male 120 V or 240 V plugs.
    • Female IEC13 end.
    • Gauge: 14/3.
    • Length: 6 feet (1.8 meters).
    Q100967.jpg

    LightEnerG™ Female Power Cord with Bare Wire End (120 V)

    P_00295
    • Versatile bare-wire-end female power cords.
    • Suitable for a variety of applications.
    Q100970.jpg

    LightEnerG™ Male Lamp Cords with Bare Wire Ends (300 V)

    P_00309
    • Used between a ballast and a mogul socket or reflector.
    • Plug the male end into the ballast.
    • Hard-wire the bare wire end to the mogul socket or reflector.
    • Voltage: 300 V.
    • Available in a range of sizes.
    Q100975.jpg

    LightEnerG™ Male Lamp Cords with Bare Wire Ends (600 V)

    P_00310
    • Used between a ballast and a mogul socket or reflector.
    • Plug the male end into the ballast.
    • Hard-wire the bare wire end to the mogul socket or reflector.
    • Voltage: 600 V.
    • Available in a range of sizes.
    Q100985.jpg

    LightEnerG™ Lamp Cord Extensions, Male & Female (600 V)

    P_00306
    • Increases the distance from the ballast to the reflector.
    • Used between a ballast and a male lamp cord.
    • Features both male and female ends.
    Q100989.jpg

    LightEnerG™ Male Lamp Cord Extensions with 120 V Female Ends

    P_00308
    • Feature both male and female ends.
    • Connects a ballast and male power cord attached to a socket.
    Q100993.jpg

    LightEnerG™ Super High Pressure Sodium (HPS) Flowering Lamps

    P_00316
    • Designed to outperform standard HPS lamps.
    • Light spectrum shifted towards the red make them ideal during the flowering stage.
    • Added blue spectrum for vegetative growth efficiency.
    • Provide more energy which is essential for optimized photosynthetic response.
    • Lamps can be used in both the horizontal and vertical position with the appropriate HPS ballast.
    Q100999.jpg

    LightEnerG™ Super Metal Halide (MH) Grow Lamps

    P_00317
    • Designed to outperform standard MH bulbs.
    • Light spectrum shifted toward blue make them ideal for the vegetative stage.
    • Added red spectrum for flowering efficiency.
    • Can be used in the horizontal and vertical position with the appropriate MH ballast.
    Q101001.jpg

    LightEnerG™ Ceramic MH Bulbs

    P_00302
    • Optimized for either vegetative or flowering stages of growth.
    • Approved for use with all ballasts.
    • Suits the needs of both professional and hobbyist gardeners.
    • Better PAR efficiency than MH or HPS lamps.
    • Superior lamp to color consistency.
    • Creates a spectrum close to that of the sun.
    • Lower heat output watt-per-watt.
    Q101003.jpg

    LightEnerG™ Ceramic Super MH Bulbs

    P_00303
    • Designed to outperform standard MH lamps.
    • Higher PAR efficiency than MH or HPS lamps.
    • Superior lamp to color consistency.
    • High initial and maintained lumens.
    • Dependable long life (15,000+ hours).
    • Universal Burning Position.
    • High efficacy / low operating cost.
    • Can work with both normal- and pin-operated sockets.
    • Environmentally friendly.
    • Lower heat output watt-per-watt.
    Q101005.jpg

    LightEnerG™ Double-Ended Ceramic MH Bulbs

    P_00304
    • Optimized for vegetative or flowering stages of growth.
    • Higher PAR efficiency than MH or HPS lamps.
    • Creates a spectrum close to that of the sun.
    • Superior lamp to color consistency.
    • Lower heat output watt per watt.
    Q101012.jpg

    LightEnerG™ Capacitors

    P_00301
    • Used with HID ballasts to store energy.
    • Delivers long life and high temperature operation.
    • Made in North America.
    Q101016.jpg

    LightEnerG™ Long Range Ignitors

    P_00307
    • Used with HID ballasts and capacitors to start HPS bulbs.
    • Engineered for long life and high temperature operation.
    Q101019.jpg

    The Flipper

    P_00490
    LightEnerGâ„¢ Flipper allows an individual ballast to run two separate lights - one at a time - by switching back and forth between each light, at a user-specified interval. Can be controlled by your own timer.
    Q101021.jpg

    LightEnerG™ Brackets

    P_00300
    • Used with the LightEnerG Premium or Econo Cord and Socket Set.
    • Provides mounting and support for the bulb and shade assembly.
    • Proprietary design.
    Q101024.jpg

    Light Energy Cone Reflector

    P_00322
    The LightEnerG™ Cone Reflector comes in either a chrome or white finish for maximum light reflection. The cone shape provides broad light diffusion and it comes with 4 pieces that make the base, a bracket to hold a mogul socket and screws. It’s light weight, easy to assemble and can accommodate all bulbs (not included). Mogul socket and power cord sold separately.
    Q101028.jpg

    Light Energy Light Wing 10 - 9 Bend With Wire

    P_00325
    LightEnerG™ Light Wing Reflectors are made from German aluminum for 95% reflectivity. Customize these reflectors by bending the aluminum to create the desired lighting for your plants. They’re ultra lightweight and come pre-wired with a Leviton socket, hangers and 15' 16/3 600v lamp cord that is ready to plug into your LightEnerG™ Ballast. Light Wing Reflectors can accommodate most bulbs (not included) and can be purchased in white.
    Q101031.jpg

    Light Energy Light Tube 1 Universal - Air Cooled Glass Tube With Reflector

    P_00323
    LightEnerGâ„¢ Light Tube 1 Air Cooled Reflectors are ETL approved and designed with the best air circulation and light reflectivity available. The interior reflective surface features a specially angled shape with highly reflective German specular aluminum, while the powder coated white enamel exterior protects it from the elements. On top of this, their light tubes provide the most unobstructed air flow in any standard air cooled reflector, allowing you to position your lamps closer to your pl
    Q101033.jpg

    LightEnerG™ Adjusta Shade Reflectors

    P_00297
    • Increases growing area under each lamp to maximize yields.
    • Adjustable settings allows it to be positioned close to plants for greater area coverage.
    • Simulates seasonal conditions indoors.
    • Manufactured using high-end materials for efficient light and heat transfer.
    • Accommodates all mogul based HID bulbs.
    • Pre-wired with 15-ft (4.6-m) lamp cord and mogul socket.
    Q101037.jpg

    Double Ended Reflector

    P_00113
    """LightEnerGâ„¢ Double Ended Extra Large Reflector are cETL approved and gives a huge coverage area and is specifically designed for use withUltra High Frequency electronic ballasts. 15FT cord is included."
    Q001038.jpg
    Q001035.jpg

    LightEnerG Nothing Beats the Ace Poster (V2)

    Q001035
    Q001036.jpg

    LightEnerG Premium Switchable Poster

    Q001036
    Q001037.jpg

    LightEnerG Bulbs Poster

    Q001037
    Q001038.jpg

    LightEnerG Cords Poster

    Q001038
    Q101676.jpg

    LightEnerG Pro Light 4 T5 HO Kit (4 Lamp), 4' x 14.5" x 3" (122 x 37 x 7.6 cm) [REFURBISHED]

    Q101676

    REFURBISHED PRODUCT

    • 30 DAY WARRANTY.
    • BULBS ARE NOT INCLUDED.
    • NOT IN ORIGINAL PACKAGING.
    • Dimensions (L x W x H): 4 ft x 14.5 in x 3 in (122 x 37 x 7.6 cm).
    Q101677.jpg

    LightEnerG Pro Light 6 T5 HO Kit (6 Lamp), 4' x 19.5" x 3" (122 x 49 x 7.6 cm) [REFURBISHED]

    Q101677

    REFURBISHED PRODUCT

    • 30 DAY WARRANTY.
    • BULBS ARE NOT INCLUDED.
    • NOT IN ORIGINAL PACKAGING.
    • Dimensions (L x W x H): 4 ft x 19.5 in x 3 in (122 x 49 x 7.6 cm).
    Q101678.jpg

    LightEnerG Pro Light 8 T5 HO Kit (8 Lamp), 4' x 25.5" x 3" (122 x 64 x 7.6 cm) [REFURBISHED]

    Q101678

    REFURBISHED PRODUCT

    • 30 DAY WARRANTY.
    • BULBS ARE NOT INCLUDED.
    • NOT IN ORIGINAL PACKAGING.
    • Dimensions (L x W x H): 4 ft x 25.5 in x 3 in (122 x 64 x 7.6 cm).
    Q101679.jpg

    LightEnerG Premium MH / HPH Switchable Ballast Kit (1,000 W) [REFURBISHED]

    Q101679

    REFURBISHED PRODUCT

    • 1,000 watt magnetic ballast.
    • Can easily switch between MH and HPS bulbs by flipping a specialized switch.
    • Also switchable between 120 V and 240 V.
    • Use provided 120 V cord or 240 V cord (sold separately).
    • No additional wiring is necessary.
    • The aluminum housing dissipates heat and keeps components cool.
    • Includes a top-of-the-line Aerovox® capacitor.
    • Lamp cord receptacle accepts all LightEnerG lamp cords and reflectors.
    • 30 DAY WARRANTY.
    Q101680.jpg

    LightEnerG E Z MH / HPS Switchable Ballast Kit (1,000 W) [REFURBISHED]

    Q101680

    REFURBISHED PRODUCT

    • Magnetic ballast features specialized switch to easily flip between MH and HPS lamps.
    • Can run on 120 V or 240 V.
    • Pre-assembled: No additional wiring is necessary.
    • Galvanized steel construction.
    • Top of the line Aerovox® capacitor included.
    • Cord receptacle accepts all LightEnerG lamp cords and reflectors.
    • Super duty handles.
    • Rubber base supports for increased heat dissipation and noise dampening.
    • Includes 6-foot power cord (120 V).
    • 240 V power cord sold separately.
    • 30 DAY WARRANTY.
    Q101014.jpg

    LightEnerG Long Range Ignitor HPS (1,000 W)

    Q101014
    • Used with HID ballasts and capacitors to start HPS bulbs.
    • Engineered for long life and high temperature operation.
    Q101015.jpg

    LightEnerG Long Range Ignitor HPS (600 W)

    Q101015
    • Used with HID ballasts and capacitors to start HPS bulbs.
    • Engineered for long life and high temperature operation.
    Q101016.jpg

    LightEnerG Long Range Ignitor HPS (400 W)

    Q101016
    • Used with HID ballasts and capacitors to start HPS bulbs.
    • Engineered for long life and high temperature operation.
    Q101019.jpg

    LightEnerG The Flipper 16

    Q101019
    • Allows an individual ballast to run two separate lights individually.
    • Switches back and forth between each light at a user-specified interval.
    • Can be controlled by your own timer.
    Q101020.jpg

    LightEnerG Econo Ballast Box

    Q101020
    • Used to store HPS and MH ballasts safely and securely.
    • Features pre-drilled holes to mount your ballast, capacitors, and ignitors.
    • Mounting hardware is included.
    Q101021.jpg

    LightEnerG Bracket for Cone and Parabolic Reflector, Small Hole (2 / pack)

    Q101021
    • Used with the LightEnerG Premium or Econo Cord and Socket Set.
    • Provides mounting and support for the bulb and shade assembly.
    • Proprietary design.
    • Small hole.
    Q101022.jpg

    LightEnerG Bracket for Cone and Parabolic Reflector, Large Hole

    Q101022
    • Used with the LightEnerG Premium or Econo Cord and Socket Set.
    • Provides mounting and support for the bulb and shade assembly.
    • Proprietary design.
    • Large hole.
    Q101023.jpg

    LightEnerG Cone Reflector 4' (1.2 m), White

    Q101023
    • Cone shape provides broad light diffusion.
    • White finish for maximum light reflection.
    • Light weight and easy to assemble.
    • Can accommodate all bulbs (not included).
    • Includes four-piece base, a bracket to hold a mogul socket and screws.
    • Mogul socket and power cord sold separately.
    • Size: 4 feet (1.2 meters).
    Q101024.jpg

    LightEnerG Cone Reflector 4' (1.2 m) Chrome

    Q101024
    • Cone shape provides broad light diffusion.
    • Chrome finish for maximum light reflection.
    • Light weight and easy to assemble.
    • Can accommodate all bulbs (not included).
    • Includes four-piece base, a bracket to hold a mogul socket and screws.
    • Mogul socket and power cord sold separately.
    • Size: 4 feet (1.2 meters).
    Q101025.jpg

    LightEnerG Light Wing 10 Reflector, 9 Bend, 20" x 17" (50 x 43 cm), White (without Cord / Mogul)

    Q101025
    • Customizable reflector: bend to create the desired lighting for plants.
    • Made from German aluminum for 95% reflectivity.
    • Ultra-lightweight.
    • Size: 20 x 17 inches (50 x 43 centimeters).
    • Color: White.
    Q101027.jpg

    LightEnerG Light Wing 10 Reflector, 9 Bend, 20" x 17" (50 x 43 cm), White (with Cord)

    Q101027
    • Customizable reflector: bend to create the desired lighting for plants.
    • Made from German aluminum for 95% reflectivity.
    • Ultra-lightweight.
    • Pre-wired with a Leviton socket.
    • Can accommodate most bulbs (not included).
    • Includes hangers and a 15-foot (4.6 meter) 16/3 600 V lamp cord.
    • Size: 20 x 17 inches (50 x 43 centimeters).
    • Color: White.
    Q101030.jpg

    LightEnerG Light Tube 1, Universal, 6" (15 cm) Glass Tube with Reflector

    Q101030
    • Provides the most unobstructed air flow of any standard air-cooled reflector.
    • Allows you to position lamps closer to plants for maximum photosynthetic response.
    • Can be hung horizontally or vertically for different growing applications.
    • Interior reflective surface features a specially-angled shape with highly-reflective German specular aluminum.
    • Powder coated white enamel exterior protects it from the elements.
    • Come pre-wired with a Leviton socket.
    • Accommodates most bulbs (not included) except BT-56.
    • Includes hangers and 15 feet of 16/3 (600 V) lamp cord.
    • ETL-approved.
    • Reflector size (L x W x H): 31 x 18.5 x 8 inches (78.74 x 46.99 x 20.32 centimeters).
    • Glass tube length: 23.5 inches (59.69 centimeters).
    • Glass tube diameter: 6 inches (15 centimeters).
    Q101031.jpg

    LightEnerG Light Tube 1, Universal, 8" (20 cm) Glass Tube with Reflector

    Q101031
    • Provides the most unobstructed air flow of any standard air-cooled reflector.
    • Allows you to position lamps closer to plants for maximum photosynthetic response.
    • Can be hung horizontally or vertically for different growing applications.
    • Interior reflective surface features a specially-angled shape with highly-reflective German specular aluminum.
    • Powder coated white enamel exterior protects it from the elements.
    • Come pre-wired with a Leviton socket.
    • Accommodates most bulbs (not included) except BT-56.
    • Includes hangers and 15 feet of 16/3 (600 V) lamp cord.
    • ETL-approved.
    • Reflector size (L x W x H): 31 x 24 x 10 inches (78.74 x 60.96 x 25.4 centimeters).
    • Glass tube length: 23.5 inches (59.69 centimeters).
    • Glass tube diameter: 8 inches (20 centimeters).
    Q101032.jpg

    LightEnerG Adjusta Shade Reflector (1,000 W)

    Q101032
    • Increases growing area under each lamp to maximize yields.
    • Adjustable settings allows it to be positioned close to plants for greater area coverage.
    • Simulates seasonal conditions indoors.
    • Manufactured using high-end materials for efficient light and heat transfer.
    • Accommodates all mogul based HID bulbs.
    • Pre-wired with 15-ft (4.6 m) lamp cord and mogul socket.
    • Wattage: 1,000 W.
    Q101033.jpg

    LightEnerG Adjusta Shade Reflector (600 W)

    Q101033
    • Increases growing area under each lamp to maximize yields.
    • Adjustable settings allows it to be positioned close to plants for greater area coverage.
    • Simulates seasonal conditions indoors.
    • Manufactured using high-end materials for efficient light and heat transfer.
    • Accommodates all mogul based HID bulbs.
    • Pre-wired with 15-ft (4.6 m) lamp cord and mogul socket.
    • Wattage: 600 W.
    Q101034.jpg

    LightEnerG Double-Ended Horticulture Reflector with 1' (30 cm) Cord (1,000 W)

    Q101034
    • Allows heat to dissipate away from the canopy.
    • Greatly reduces garden hotspots.
    • Increased lamp life thanks to less heat build-up.
    • cETL approved.
    • Width: 18.5 inches (46.99 centimeters).
    • Height: 10.5 inches (26.67 centimeters).
    • Cord length: 1 foot (30 centimeters).
    • Weight: 7.5 pounds (3.4 kilograms).
    Q101035.jpg

    LightEnerG Double-Ended Wing Reflector, 36" x 27.5" (91 x 70 cm) with 15' (4.5 m) Cord (1,000 W)

    Q101035
    • Engineered for use with ultra high frequency (UHF) electronic ballasts.
    • Provides an extensive coverage area.
    • cETL approved.
    • Size: 36 x 27.5 inches (91 x 70 centimeters).
    • Cord length: 15 foot (4.5 meters).
    Q101036.jpg

    LightEnerG Double-Ended Wing Reflector, 18.5" x 18.5" (47 x 47 cm) with 15' (4.5 m) Cord (1,000 W)

    Q101036
    • Engineered for use with ultra high frequency (UHF) electronic ballasts.
    • Provides an extensive coverage area.
    • cETL approved.
    • Size: 18.5 x 18.5 inches (47 x 47 centimeters).
    • Cord length: 15 foot (4.5 meters).
    Q101037.jpg

    LightEnerG Double-Ended Reflector, Extra Large 36.5" x 30" (92.7 x 76.2 cm) with 15' (4.5 m) Cord

    Q101037
    • Engineered for use with ultra high frequency (UHF) electronic ballasts.
    • Provides an extensive coverage area.
    • cETL approved.
    • Width: 36.5 inches (92.7 centimeters).
    • Height: 30 inches (76.2 centimeters).
    • Cord length: 15 foot (4.5 meters).
    • Weight: 5.95 pounds (2.7 kilograms).
    Q100917.jpg

    LightEnerG Pro Light 2 T5 SHO Kit (2 Lamp), 4' x 9" x 3" (122 x 23 x 7.6 cm)

    Q100917
    • Extremely efficient low-heat horticultural lighting system.
    • T5 Super High Output (SHO) lighting provides an ideal spectrum for plant growth.
    • Minimal heat output allows placement 6 to 8 in (15.24 to 20.32 cm) above plant canopy.
    • No risk of scorching leaves, unlike MH lighting.
    • Closer placement maximizes photosynthetic response and promotes fuller growth at lower wattage.
    • Includes T5 SHO grow bulbs, built-in ballast, hanging hardware, and 12-foot (3.7-meter) grounded power cord.
    • Two-year rebuild or replace warranty.
    • ETL approved.
    • Dimensions (L x W x H): 4 ft x 9 in x 3 in (122 x 23 x 7.6 cm).
    Q100921.jpg

    LightEnerG Pro Light 12 T5 SHO Kit (12 Lamp), 46.2" x 34" x 2.95" (117 x 86 x 7.5 cm)

    Q100921
    • Extremely efficient low-heat horticultural lighting system.
    • T5 Super High Output (SHO) lighting provides an ideal spectrum for plant growth.
    • Minimal heat output allows placement 6 to 8 in (15.24 to 20.32 cm) above plant canopy.
    • No risk of scorching leaves, unlike MH lighting.
    • Closer placement maximizes photosynthetic response and promotes fuller growth at lower wattage.
    • Includes T5 SHO grow bulbs, built-in ballast, hanging hardware, and 12-foot (3.7-meter) grounded power cord.
    • Two-year rebuild or replace warranty.
    • ETL approved.
    • Dimensions (L x W x H): 46.2 x 34 x 2.95 in (117 x 86 x 7.5 cm).
    Q100922.jpg

    LightEnerG Pro Light 2 T5 SHO Kit Mini (2 Lamp), 2' x 9" x 3" (60 x 23 x 7.6 cm)

    Q100922
    • Extremely efficient low-heat horticultural lighting system.
    • T5 Super High Output (SHO) lighting provides an ideal spectrum for plant growth.
    • Minimal heat output allows placement 6 to 8 in (15.24 to 20.32 cm) above plant canopy.
    • No risk of scorching leaves, unlike MH lighting.
    • Closer placement maximizes photosynthetic response and promotes fuller growth at lower wattage.
    • Includes T5 SHO grow bulbs, built-in ballast, hanging hardware, and 12-foot (3.7-meter) grounded power cord.
    • Two-year rebuild or replace warranty.
    • ETL approved.
    • Dimensions (L x W x H): 2 ft x 9 in x 3 in (60 x 23 x 7.6 cm).
    Q100923.jpg

    LightEnerG Pro Light 4 T5 SHO Kit Mini (4 Lamp) 2' x 14.5" x 3" (60 x 37 x 7.6 cm)

    Q100923
    • Extremely efficient low-heat horticultural lighting system.
    • T5 Super High Output (SHO) lighting provides an ideal spectrum for plant growth.
    • Minimal heat output allows placement 6 to 8 in (15.24 to 20.32 cm) above plant canopy.
    • No risk of scorching leaves, unlike MH lighting.
    • Closer placement maximizes photosynthetic response and promotes fuller growth at lower wattage.
    • Includes T5 SHO grow bulbs, built-in ballast, hanging hardware, and 12-foot (3.7-meter) grounded power cord.
    • Two-year rebuild or replace warranty.
    • ETL approved.
    • Dimensions (L x W x H): 2 ft x 14.5 in x 3 in (60 x 37 x 7.6 cm).
    Q100925.jpg

    LightEnerG Pro Light 8 T5 HO Kit Mini (8 Lamp), 2' x 25.5" x 3" (60 x 65 x 7.6 cm)

    Q100925
    • Extremely efficient low-heat horticultural lighting system.
    • T5 Super High Output (SHO) lighting provides an ideal spectrum for plant growth.
    • Minimal heat output allows placement 6 to 8 in (15.24 to 20.32 cm) above plant canopy.
    • No risk of scorching leaves, unlike MH lighting.
    • Closer placement maximizes photosynthetic response and promotes fuller growth at lower wattage.
    • Includes T5 SHO grow bulbs, built-in ballast, hanging hardware, and 12-foot (3.7-meter) grounded power cord.
    • Two-year rebuild or replace warranty.
    • ETL approved.
    • Dimensions (L x W x H): 2 ft x 25.5 in x 3 in (60 x 65 x 7.6 cm).
    Q100926.jpg

    LightEnerG Pro Light 4 T5 HO Grow Bulb (54 W)

    Q100926
    • Designed to be used with LightEnerG Pro Light T5 HO Kits.
    • Cost-efficient bulbs ideal for starting plants from seeds or cuttings.
    • Can be used to add extra light during the fruiting and flowering stage.
    Q100927.jpg

    LightEnerG Pro Light 2 T5 HO Grow Bulb (24 W)

    Q100927
    • Designed to be used with LightEnerG Pro Light T5 HO Kits.
    • Cost-efficient bulbs ideal for starting plants from seeds or cuttings.
    • Can be used to add extra light during the fruiting and flowering stage.
    Q100930.jpg

    LightEnerG Dual Zone Real Steel MH / HPS Switchable Ballast (1,000 W)

    Q100930
    • UL approved magnetic ballast.
    • Specialized switch for changing between MH and HPS bulbs.
    • Switch between 120 V and 240 V power.
    • 8-foot (2.4 m) 240 V power cord included.
    • 120 V power cord available separately.
    • No additional wiring needed.
    Q100931.jpg

    LightEnerG Premium MH / HPS Switchable Quad Tap Ballast Kit (1,000 W)

    Q100931
    • 1,000 watt magnetic ballast.
    • Can easily switch between MH and HPS bulbs by flipping a specialized switch.
    • Can also be switched between four primary input voltages: 120 V, 208 V, 240 V or 277 V.
    • The aluminum housing is specially designed to dissipate heat and keep components cool.
    • Top of the line Aerovox® capacitor is also included.
    • Use the 120 V or 240 V power cord (sold separately) to change between these two voltages.
    • If 208 V or 277 V operation is required the wiring must be changed by a certified electrician.
    • The lamp cord receptacle accepts all LightEnerGâ„¢ lamp cords and reflectors.
    • UL approved.
    Q100934.jpg

    LightEnerG Premium MH / HPS Switchable Ballast Kit (1,000 W)

    Q100934
    • 1,000 watt magnetic ballast.
    • Can easily switch between MH and HPS bulbs by flipping a specialized switch.
    • Also switchable between 120 V and 240 V.
    • Use provided 120 V cord or 240 V cord (sold separately).
    • No additional wiring is necessary.
    • The aluminum housing dissipates heat and keeps components cool.
    • Includes a top-of-the-line Aerovox® capacitor.
    • Lamp cord receptacle accepts all LightEnerG lamp cords and reflectors.
    Q100936.jpg

    LightEnerG Premium MH / HPS Switchable Ballast Kit (400 W)

    Q100936
    • 400 watt magnetic ballast.
    • Can easily switch between MH and HPS bulbs by flipping a specialized switch.
    • Also switchable between 120 V and 240 V.
    • Use provided 120 V cord or 240 V cord (sold separately).
    • No additional wiring is necessary.
    • The aluminum housing dissipates heat and keeps components cool.
    • Includes a top-of-the-line Aerovox® capacitor.
    • Lamp cord receptacle accepts all LightEnerG lamp cords and reflectors.
    Q100932.jpg

    LightEnerG Premium HPS Quad Tap Ballast Kit (600 W)

    Q100932
    • Magnetic ballast capable of switching between 120 V and 240 V.
    • Use either the 120v or a 240v power cord (sold separately) to change the voltage of the ballast.
    • No additional wiring is necessary.
    • Can also be used with 600 W MH conversion lamps.
    • Aluminum housing is specially designed to dissipate heat and keep components cool.
    • Includes a top-of-the-line Aerovox® capacitor.
    • Lamp cord receptacle accepts all LightEnerG lamp cords and reflectors.
    Q100935.jpg

    LightEnerG Premium HPS Ballast Kit (600 W)

    Q100935
    • Magnetic ballast capable of switching between 120 V and 240 V.
    • Use either the 120v or a 240v power cord (sold separately) to change the voltage of the ballast.
    • No additional wiring is necessary.
    • Can also be used with 600 W MH conversion lamps.
    • Aluminum housing is specially designed to dissipate heat and keep components cool.
    • Includes a top-of-the-line Aerovox® capacitor.
    • Lamp cord receptacle accepts all LightEnerG lamp cords and reflectors.
    Q100937.jpg

    LightEnerG E Z MH / HPS Switchable Ballast Kit (1,000 W)

    Q100937
    • Magnetic ballast features specialized switch to easily flip between MH and HPS lamps.
    • Can run on 120 V or 240 V.
    • Pre-assembled: No additional wiring is necessary.
    • Galvanized steel construction.
    • Top of the line Aerovox® capacitor included.
    • Cord receptacle accepts all LightEnerG lamp cords and reflectors.
    • Super duty handles.
    • Rubber base supports for increased heat dissipation and noise dampening.
    • Includes 15-foot (4.6-meter) lamp wire and 6-foot power cord (120 V).
    • 240 V power cord sold separately.
    Q100938.jpg

    LightEnerG Bare HPS Ballast (1,000 W)

    Q100938
    • UL certified ballast unit.
    • North American made capacitor.
    • Quad-tap (120 V, 208 V, 240 V, and 277 V).
    • Must be assembled by a qualified electrician.
    • Only for use with HPS bulbs.
    Q100939.jpg

    LightEnerG Bare MH Ballast (1,000 W)

    Q100939
    • UL certified ballast unit.
    • North American made capacitor.
    • Quad-tap (120 V, 208 V, 240 V, and 277 V).
    • Must be assembled by a qualified electrician.
    • Only for use with MH bulbs.
    Q100940.jpg

    LightEnerG The ACE Replacement Fuse (15 amp / 250 V) (1,000 W)

    Q100940

    15 amp / 250 volt replacement fuse for The ACEâ„¢ Digital Ballast.

    Q100941.jpg

    LightEnerG The ACE Replacement Fuse (10 amp / 250 V) (600 W)

    Q100941

    10 amp / 250 volt replacement fuse for The ACEâ„¢ Digital Ballast.

    Q100942.jpg

    LightEnerG The ACE Replacement Fuse (6.3 amp / 250 V) (400 W)

    Q100942

    6.3 amp / 250 volt replacement fuse for The ACEâ„¢ Digital Ballast.

    Q100943.jpg

    LightEnerG The ACE Electronic Digital HID Ballast (1,000 W) 1yr

    Q100943
    • State-of-the-art, UL-approved electronic ballast.
    • Compatible with both MH and HPS bulbs.
    • Features a dimmable switch with the ability to adjust watt output for three different settings.
    • Has carefully arranged circuit boards and stainless steel ball bearing fans.
    • Runs 15% cooler than standard ballasts, ensuring longer life and improved performance.
    • Generator-ready with the most stable output frequency of any comparable ballast.
    • Results in lower power loss and better overall power management.
    • Has a power factor of 99.9% for 100% of the time.
    • Far more efficient than older core and coil ballasts.
    • Wattage: 1,000 W.
    Q100944.jpg

    LightEnerG The ACE Electronic Digital HID Ballast (600 W) 1yr

    Q100944
    • State-of-the-art, UL-approved electronic ballast.
    • Compatible with both MH and HPS bulbs.
    • Features a dimmable switch with the ability to adjust watt output for three different settings.
    • Has carefully arranged circuit boards and stainless steel ball bearing fans.
    • Runs 15% cooler than standard ballasts, ensuring longer life and improved performance.
    • Generator-ready with the most stable output frequency of any comparable ballast.
    • Results in lower power loss and better overall power management.
    • Has a power factor of 99.9% for 100% of the time.
    • Far more efficient than older core and coil ballasts.
    • Wattage: 600 W.
    Q100945.jpg

    LightEnerG The ACE Electronic Digital HID Ballast (400 W) 1yr

    Q100945
    • State-of-the-art, UL-approved electronic ballast.
    • Compatible with both MH and HPS bulbs.
    • Features a dimmable switch with the ability to adjust watt output for three different settings.
    • Has carefully arranged circuit boards and stainless steel ball bearing fans.
    • Runs 15% cooler than standard ballasts, ensuring longer life and improved performance.
    • Generator-ready with the most stable output frequency of any comparable ballast.
    • Results in lower power loss and better overall power management.
    • Has a power factor of 99.9% for 100% of the time.
    • Far more efficient than older core and coil ballasts.
    • Wattage: 400 W.
    Q100948.jpg

    LightEnerG Mogul Socket (No Leads)

    Q100948
    • Premium 600 V, 1500 W, 5KV-pulse-rated porcelain mogul base sockets.
    • Accommodate all mogul base bulbs in a universal position.
    • Mogul cap and washer are included.
    Q100949.jpg

    LightEnerG Mogul Socket (With Leads)

    Q100949
    • Premium 600 V, 1500 W, 5KV-pulse-rated porcelain mogul base sockets.
    • Accommodate all mogul base bulbs in a universal position.
    • Mogul cap, washer, and leads are included.
    Q100950.jpg

    LightEnerG Wire Cord Strain Reliefs

    Q100950
    • Fastest and easiest way to secure a lamp cord to mogul sockets.
    • Offer improved strain relief and mechanical structure for wire terminations.
    • Extend cable flex life.
    • Mogul socket and wire are not included.
    Q100951.jpg

    LightEnerG Econo Cord and Socket Set Assembly with Bare Wire End 14/3 (15 ft / 4.5 m) (300 V)

    Q100951
    • Comes with a universal position mogul socket.
    • Lamp cord includes LightEnerG wire strain relief for added durability.
    • Bare wire end.
    • Gauge: 14/3.
    • Voltage: 300 V.
    • Length: 15 feet (4.5 meters).
    Q100953.jpg

    LightEnerG Premium Cord and Mogul Socket Set Assembly 14/3 (300 V)

    Q100953
    • Comes with a universal position mogul socket.
    • Mounted to an engineered and modified powder-coated octagonal wire box with a hanger.
    • Lamp cord includes a LightEnerG Wire Strain Relief for added durability.
    • Plug the male end into a LightEnerG ballast and add the appropriate lamp and reflector.
    • Gauge: 14/3.
    • Voltage: 300 V.
    Q100954.jpg

    LightEnerG Premium Cord and Mogul Socket Set Assembly 16/3 (600 V)

    Q100954
    • Comes with a universal position mogul socket.
    • Mounted to an engineered and modified powder-coated octagonal wire box with a hanger.
    • Lamp cord includes a LightEnerG Wire Strain Relief for added durability.
    • Plug the male end into a LightEnerG ballast and add the appropriate lamp and reflector.
    • Gauge: 16/3.
    • Voltage: 600 V.
    Q100956.jpg

    LightEnerG Econo Cord and Mogul Socket Set Assembly 14/3 (15 ft / 4.5 m) (300 V)

    Q100956
    • Comes with a universal position mogul socket with a hanger.
    • Lamp cord includes LightEnerG wire strain relief for added durability.
    • Gauge: 14/3.
    • Voltage: 300 V.
    • Length: 15 feet (4.5 meters).
    Q100957.jpg

    LightEnerG Econo Cord and Mogul Socket Set Assembly 16/3 (15 ft / 4.5 m) (600 V)

    Q100957
    • Comes with a universal position mogul socket with a hanger.
    • Lamp cord includes LightEnerG wire strain relief for added durability.
    • Gauge: 16/3.
    • Voltage: 600 V.
    • Length: 15 feet (4.5 meters).
    Q100958.jpg

    LightEnerG 120 V Male Power Cord with Bare Wire End 14/3 (6 ft / 1.8 m) (300 V)

    Q100958
    • Bare-wire-end male power cords.
    • Used between a ballast and a power outlet.
    • Gauge: 14/3.
    • Length: 6 feet (1.8 meter).
    Q100959.jpg

    LightEnerG 120 V Male Power Cord with Bare Wire End 16/3 (6 ft / 1.8 m) (300 V)

    Q100959
    • Bare-wire-end male power cords.
    • Used between a ballast and a power outlet.
    • Gauge: 16/3.
    • Length: 6 feet (1.8 meter).
    Q100960.jpg

    LightEnerG 120 V Male Power Cord with Bare Wire End 14/3 (3 ft / 1 m) (600 V)

    Q100960
    • Bare-wire-end male power cords.
    • Used between a ballast and a power outlet.
    • Gauge: 14/3.
    • Length: 3 feet (1 meter).
    Q100961.jpg

    LightEnerG 120 V Male Power Cord with Bare Wire End 16/3 (6 ft / 1.8 m) (600 V)

    Q100961
    • Bare-wire-end male power cords.
    • Used between a ballast and a power outlet.
    • Gauge: 16/3.
    • Length: 6 feet (1.8 meter).
    Q100962.jpg

    LightEnerG 120 V Male Power Cord with Bare Wire End 16/3 (12 ft / 3.6 m) (600 V)

    Q100962
    • Bare-wire-end male power cords.
    • Used between a ballast and a power outlet.
    • Gauge: 16/3.
    • Length: 12 feet (3.6 meter).
    Q100963.jpg

    LightEnerG Ballast Power Cord 14/3 (6 ft / 1.8 m) (120 V)

    Q100963
    • High quality plugs securely connect to any IEC14 ballast.
    • Male 120 V plug.
    • Female IEC13 end.
    • Gauge: 14/3.
    • Length: 6 feet (1.8 meters).
    Q100964.jpg

    LightEnerG Ballast Power Cord 14/3 (6 ft / 1.8 m) (240 V)

    Q100964
    • High quality plugs securely connect to any IEC14 ballast.
    • Male 240 V plug.
    • Female IEC13 end.
    • Gauge: 14/3.
    • Length: 6 feet (1.8 meters).
    Q100965.jpg

    LightEnerG 120 V Female Power Cord with Bare Wire End HD 14/3 (1 ft / 30 cm)

    Q100965
    • Versatile bare-wire-end female power cords.
    • Suitable for a variety of applications.
    • Gauge: 14/3.
    • Length: 3 feet (1 meter).
    Q100966.jpg

    LightEnerG 120 V Female Power Cord with Bare Wire End HD 14/3 (6 ft / 1.8 m)

    Q100966
    • Versatile bare-wire-end female power cords.
    • Suitable for a variety of applications.
    • Gauge: 14/3.
    • Length: 6 feet (1.8 meter).
    Q100967.jpg

    LightEnerG 120 V Female Power Cord with Bare Wire End 14/3 (3 ft / 1 m) (600 V)

    Q100967
    • Versatile bare-wire-end female power cords.
    • Suitable for a variety of applications.
    • Gauge: 14/3.
    • Length: 3 feet (1 meter).
    Refine
    ×