LightEnerG

• State-of-the-art, UL-approved electronic ballast.
• Compatible with both MH and HPS bulbs.
• Features a dimmable switch with the ability to adjust watt output for three different settings.
• Has carefully arranged circuit boards and stainless steel ball bearing fans.
• Runs 15% cooler than standard ballasts, ensuring longer life and improved performance.
• Generator-ready with the most stable output frequency of any comparable ballast.
• Results in lower power loss and better overall power management.
• Has a power factor of 99.9% for 100% of the time.
• Far more efficient than older core and coil ballasts.
• Wattage: 1,000 W.

• State-of-the-art, UL-approved electronic ballast.
• Compatible with both MH and HPS bulbs.
• Features a dimmable switch with the ability to adjust watt output for three different settings.
• Has carefully arranged circuit boards and stainless steel ball bearing fans.
• Runs 15% cooler than standard ballasts, ensuring longer life and improved performance.
• Generator-ready with the most stable output frequency of any comparable ballast.
• Results in lower power loss and better overall power management.
• Has a power factor of 99.9% for 100% of the time.
• Far more efficient than older core and coil ballasts.
• Wattage: 600 W.

• State-of-the-art, UL-approved electronic ballast.
• Compatible with both MH and HPS bulbs.
• Features a dimmable switch with the ability to adjust watt output for three different settings.
• Has carefully arranged circuit boards and stainless steel ball bearing fans.
• Runs 15% cooler than standard ballasts, ensuring longer life and improved performance.
• Generator-ready with the most stable output frequency of any comparable ballast.
• Results in lower power loss and better overall power management.
• Has a power factor of 99.9% for 100% of the time.
• Far more efficient than older core and coil ballasts.
• Wattage: 400 W.

• Magnetic ballast features specialized switch to easily flip between MH and HPS lamps.
• Can run on 120 V or 240 V.
• Pre-assembled: No additional wiring is necessary.
• Galvanized steel construction.
• Top of the line Aerovox® capacitor included.
• Cord receptacle accepts all LightEnerG lamp cords and reflectors.
• Super duty handles.
• Rubber base supports for increased heat dissipation and noise dampening.
• Includes 15-foot (4.6-meter) lamp wire and 6-foot power cord (120 V).
• 240 V power cord sold separately.

• UL certified ballast unit.
• North American made capacitor.
• Quad-tap (120 V, 208 V, 240 V, and 277 V).
• Must be assembled by a qualified electrician.
• Only for use with HPS bulbs.

• Comes with a universal position mogul socket.
• Lamp cord includes LightEnerG wire strain relief for added durability.
• Bare wire end.
• Gauge: 14/3.
• Voltage: 300 V.
• Length: 15 feet (4.5 meters).

• Comes with a universal position mogul socket.
• Mounted to an engineered and modified powder-coated octagonal wire box with a hanger.
• Lamp cord includes a LightEnerG Wire Strain Relief for added durability.
• Plug the male end into a LightEnerG ballast and add the appropriate lamp and reflector.
• Gauge: 14/3.
• Voltage: 300 V.

• Comes with a universal position mogul socket.
• Mounted to an engineered and modified powder-coated octagonal wire box with a hanger.
• Lamp cord includes a LightEnerG Wire Strain Relief for added durability.
• Plug the male end into a LightEnerG ballast and add the appropriate lamp and reflector.
• Gauge: 16/3.
• Voltage: 600 V.

• Comes with a universal position mogul socket with a hanger.
• Lamp cord includes LightEnerG wire strain relief for added durability.
• Gauge: 14/3.
• Voltage: 300 V.
• Length: 15 feet (4.5 meters).

• Premium 600 V, 1500 W, 5KV-pulse-rated porcelain mogul base sockets.
• Accommodate all mogul base bulbs in a universal position.
• Mogul cap, washer, and leads are included.

• Fastest and easiest way to secure a lamp cord to mogul sockets.
• Offer improved strain relief and mechanical structure for wire terminations.
• Extend cable flex life.
• Mogul socket and wire are not included.

• Premium 600 V, 1500 W, 5KV-pulse-rated porcelain mogul base sockets.
• Accommodate all mogul base bulbs in a universal position.
• Mogul cap and washer are included.

• UL certified ballast unit.
• North American made capacitor.
• Quad-tap (120 V, 208 V, 240 V, and 277 V).
• Must be assembled by a qualified electrician.
• Only for use with MH bulbs.

15 amp / 250 volt replacement fuse for The ACE™ Digital Ballast.

10 amp / 250 volt replacement fuse for The ACE™ Digital Ballast.

6.3 amp / 250 volt replacement fuse for The ACE™ Digital Ballast.

• Grow and flowering lamp designed for high output and performance.
• Features both high pressure sodium (HPS) and metal halide (MH) cores.
• Provides the red light of HPS bulbs and the blue light of MH bulbs.
• Suitable for use throughout the entire growth cycle with just one bulb.
• Emits 117,000 initial lumens.
• Rated for a 12,000-hour life, lasting multiple growth cycles.
• Can be used with any 1,000 W HPS ballast.

• Designed to outperform standard HPS lamps.
• Light spectrum shifted towards the red make them ideal during the flowering stage.
• Added blue spectrum for vegetative growth efficiency.
• Provide more energy which is essential for optimized photosynthetic response.
• Lamps can be used in both the horizontal and vertical position with the appropriate HPS ballast.
• Wattage: 1,000 W.

• Designed to operate flawlessly with metal halide lighting systems.
• Allows one-dimensional systems to act as complete lighting systems by accepting both metal halide (MH) and this conversion bulb.
• Provides optimum red spectral energy to promote flowering and fruiting in plants.
• Metal halide bulbs promote plant growth.
• Wattage: 940 W.

• Designed to outperform standard MH bulbs.
• Light spectrum shifted toward blue make them ideal for the vegetative stage.
• Added red spectrum for flowering efficiency.
• Can be used in the horizontal and vertical position with the appropriate MH ballast.
• Wattage: 1,000 W.

• Designed to outperform standard HPS lamps.
• Light spectrum shifted towards the red make them ideal during the flowering stage.
• Added blue spectrum for vegetative growth efficiency.
• Provide more energy which is essential for optimized photosynthetic response.
• Lamps can be used in both the horizontal and vertical position with the appropriate HPS ballast.
• Wattage: 600 W.

• Designed to outperform standard HPS lamps.
• Light spectrum shifted towards the red make them ideal during the flowering stage.
• Added blue spectrum for vegetative growth efficiency.
• Provide more energy which is essential for optimized photosynthetic response.
• Lamps can be used in both the horizontal and vertical position with the appropriate HPS ballast.
• Wattage: 400 W.

• Used between a ballast and a male lamp cord.
• Can turn any ballast into a LightEnerG-compatible ballast.
• Can also be plugged in to the end of LightEnerG fixtures to create a bare wire end.
• Gauge: 14/3.
• Length: 1 foot (30 centimeters).
• Voltage: 600 V.

• Increases the distance from the ballast to the reflector.
• Used between a ballast and a male lamp cord.
• Features both male and female ends.
• Gauge: 14/3.
• Length: 1 foot (30 centimeters).
• Voltage: 300 V.

• Adjustable-height reflector suspension system.
• Allows for up to 4.5 ft (1.4 m) of lift in one easy step.
• Sturdy and reliable mechanism.
• Keeps the reflector in place with a simple pull-string.
• Multi filament line.

• Easily adjust the height of light fixtures and carbon filters.
• Built with high-grade, impact-resistant material.
• Rust-resistant components withstand any environment.

• Increases the distance from the ballast to the reflector.
• Used between a ballast and a male lamp cord.
• Features both male and female ends.
• Gauge: 14/3.
• Length: 25 feet (7.6 meters).
• Voltage: 600 V.

• Increases the distance from the ballast to the reflector.
• Used between a ballast and a male lamp cord.
• Features both male and female ends.
• Gauge: 14/3.
• Length: 1 foot (30 centimeters).
• Voltage: 600 V.

• Feature both male and female ends.
• Connects a ballast and male power cord attached to a socket.
• Gauge: 14/3.
• Length: 1 foot (30 centimeters).
• Voltage: 300 V.

• Feature both male and female ends.
• Connects a ballast and male power cord attached to a socket.
• Gauge: 14/3.
• Length: 1 foot (30 centimeters).
• Voltage: 600 V.

• Increases the distance from the ballast to the reflector.
• Used between a ballast and a male lamp cord.
• Features both male and female ends.
• Gauge: 14/3.
• Length: 10 feet (3 meters).
• Voltage: 600 V.

• Increases the distance from the ballast to the reflector.
• Used between a ballast and a male lamp cord.
• Features both male and female ends.
• Gauge: 14/3.
• Length: 15 feet (4.5 meters).
• Voltage: 600 V.

• Used between a ballast and a male lamp cord.
• Can turn any ballast into a LightEnerG-compatible ballast.
• Can also be plugged in to the end of LightEnerG fixtures to create a bare wire end.
• Gauge: 14/3.
• Length: 1 foot (30 centimeters).
• Voltage: 300 V.

• Used between a ballast and a male lamp cord.
• Can turn any ballast into a LightEnerG-compatible ballast.
• Can also be plugged in to the end of LightEnerG fixtures to create a bare wire end.
• Gauge: 14/3.
• Length: 6 foot (1.8 meters).
• Voltage: 300 V.

REFURBISHED PRODUCT

• 1,000 watt magnetic ballast.
• Can easily switch between MH and HPS bulbs by flipping a specialized switch.
• Also switchable between 120 V and 240 V.
• Use provided 120 V cord or 240 V cord (sold separately).
• No additional wiring is necessary.
• The aluminum housing dissipates heat and keeps components cool.
• Includes a top-of-the-line Aerovox® capacitor.
• Lamp cord receptacle accepts all LightEnerG lamp cords and reflectors.
• 30 DAY WARRANTY.

REFURBISHED PRODUCT

• 30 DAY WARRANTY.
• BULBS ARE NOT INCLUDED.
• NOT IN ORIGINAL PACKAGING.
• Dimensions (L x W x H): 4 ft x 14.5 in x 3 in (122 x 37 x 7.6 cm).

REFURBISHED PRODUCT

• 30 DAY WARRANTY.
• BULBS ARE NOT INCLUDED.
• NOT IN ORIGINAL PACKAGING.
• Dimensions (L x W x H): 4 ft x 19.5 in x 3 in (122 x 49 x 7.6 cm).

REFURBISHED PRODUCT

• 30 DAY WARRANTY.
• BULBS ARE NOT INCLUDED.
• NOT IN ORIGINAL PACKAGING.
• Dimensions (L x W x H): 4 ft x 25.5 in x 3 in (122 x 64 x 7.6 cm).

REFURBISHED PRODUCT

• Magnetic ballast features specialized switch to easily flip between MH and HPS lamps.
• Can run on 120 V or 240 V.
• Pre-assembled: No additional wiring is necessary.
• Galvanized steel construction.
• Top of the line Aerovox® capacitor included.
• Cord receptacle accepts all LightEnerG lamp cords and reflectors.
• Super duty handles.
• Rubber base supports for increased heat dissipation and noise dampening.
• Includes 6-foot power cord (120 V).
• 240 V power cord sold separately.
• 30 DAY WARRANTY.