LightEnerG
LightEnerG™ Horticultural Lighting Solutions
LightEnerG offers premium grow lamps, ballasts, reflectors, and electrical components. Designed for performance, efficiency, and safety, LightEnerG products help growers achieve consistent, high‑yield results across growing environments.
LightEnerG MH Capacitor 24uF 480VAC (1,000 W)
Q101012
- Used with HID Ballasts to store energy.
- Engineered for long life and high temperature operation.
- Made in North America.
LightEnerG Long Range Ignitor HPS (600 W)
Q101015
- Used with HID ballasts and capacitors to start HPS bulbs.
- Engineered for long life and high temperature operation.
LightEnerG Double-Ended Reflector, Extra Large 36.5" x 30" (92.7 x 76.2 cm) with 15' (4.5 m) Cord
Q101037
- Engineered for use with ultra high frequency (UHF) electronic ballasts.
- Provides an extensive coverage area.
- cETL approved.
- Width: 36.5 inches (92.7 centimeters).
- Height: 30 inches (76.2 centimeters).
- Cord length: 15 foot (4.5 meters).
- Weight: 5.95 pounds (2.7 kilograms).
LightEnerG Pro Light 8 T5 HO Kit Mini (8 Lamp), 2' x 25.5" x 3" (60 x 65 x 7.6 cm)
Q100925
- Extremely efficient low-heat horticultural lighting system.
- T5 Super High Output (SHO) lighting provides an ideal spectrum for plant growth.
- Minimal heat output allows placement 6 to 8 in (15.24 to 20.32 cm) above plant canopy.
- No risk of scorching leaves, unlike MH lighting.
- Closer placement maximizes photosynthetic response and promotes fuller growth at lower wattage.
- Includes T5 SHO grow bulbs, built-in ballast, hanging hardware, and 12-foot (3.7-meter) grounded power cord.
- Two-year rebuild or replace warranty.
- ETL approved.
- Dimensions (L x W x H): 2 ft x 25.5 in x 3 in (60 x 65 x 7.6 cm).
LightEnerG Lamp Cord Extension Male and Female 14/3 (25 ft / 7.6 m) (600 V)
Q100984
- Increases the distance from the ballast to the reflector.
- Used between a ballast and a male lamp cord.
- Features both male and female ends.
- Gauge: 14/3.
- Length: 25 feet (7.6 meters).
- Voltage: 600 V.
LightEnerG Bracket for Cone and Parabolic Reflector, Large Hole
Q101022
- Used with the LightEnerG Premium or Econo Cord and Socket Set.
- Provides mounting and support for the bulb and shade assembly.
- Proprietary design.
- Large hole.
LightEnerG Pro Light 4 T5 SHO Kit Mini (4 Lamp) 2' x 14.5" x 3" (60 x 37 x 7.6 cm)
Q100923
- Extremely efficient low-heat horticultural lighting system.
- T5 Super High Output (SHO) lighting provides an ideal spectrum for plant growth.
- Minimal heat output allows placement 6 to 8 in (15.24 to 20.32 cm) above plant canopy.
- No risk of scorching leaves, unlike MH lighting.
- Closer placement maximizes photosynthetic response and promotes fuller growth at lower wattage.
- Includes T5 SHO grow bulbs, built-in ballast, hanging hardware, and 12-foot (3.7-meter) grounded power cord.
- Two-year rebuild or replace warranty.
- ETL approved.
- Dimensions (L x W x H): 2 ft x 14.5 in x 3 in (60 x 37 x 7.6 cm).
LightEnerG Long Range Ignitor HPS (1,000 W)
Q101014
- Used with HID ballasts and capacitors to start HPS bulbs.
- Engineered for long life and high temperature operation.
LightEnerG Light Tube 1, Universal, 8" (20 cm) Glass Tube with Reflector
Q101031
- Provides the most unobstructed air flow of any standard air-cooled reflector.
- Allows you to position lamps closer to plants for maximum photosynthetic response.
- Can be hung horizontally or vertically for different growing applications.
- Interior reflective surface features a specially-angled shape with highly-reflective German specular aluminum.
- Powder coated white enamel exterior protects it from the elements.
- Come pre-wired with a Leviton socket.
- Accommodates most bulbs (not included) except BT-56.
- Includes hangers and 15 feet of 16/3 (600 V) lamp cord.
- ETL-approved.
- Reflector size (L x W x H): 31 x 24 x 10 inches (78.74 x 60.96 x 25.4 centimeters).
- Glass tube length: 23.5 inches (59.69 centimeters).
- Glass tube diameter: 8 inches (20 centimeters).
LightEnerG Premium MH / HPS Switchable Quad Tap Ballast Kit (1,000 W)
Q100931
- 1,000 watt magnetic ballast.
- Can easily switch between MH and HPS bulbs by flipping a specialized switch.
- Can also be switched between four primary input voltages: 120 V, 208 V, 240 V or 277 V.
- The aluminum housing is specially designed to dissipate heat and keep components cool.
- Top of the line Aerovox® capacitor is also included.
- Use the 120 V or 240 V power cord (sold separately) to change between these two voltages.
- If 208 V or 277 V operation is required the wiring must be changed by a certified electrician.
- The lamp cord receptacle accepts all LightEnerG™ lamp cords and reflectors.
- UL approved.
LightEnerG Premium MH / HPS Switchable Ballast Kit (1,000 W)
Q100934
- 1,000 watt magnetic ballast.
- Can easily switch between MH and HPS bulbs by flipping a specialized switch.
- Also switchable between 120 V and 240 V.
- Use provided 120 V cord or 240 V cord (sold separately).
- No additional wiring is necessary.
- The aluminum housing dissipates heat and keeps components cool.
- Includes a top-of-the-line Aerovox® capacitor.
- Lamp cord receptacle accepts all LightEnerG lamp cords and reflectors.
LightEnerG Bare HPS Ballast (1,000 W)
Q100938
- UL certified ballast unit.
- North American made capacitor.
- Quad-tap (120 V, 208 V, 240 V, and 277 V).
- Must be assembled by a qualified electrician.
- Only for use with HPS bulbs.
LightEnerG The ACE Electronic Digital HID Ballast (400 W) 1yr
Q100945
- State-of-the-art, UL-approved electronic ballast.
- Compatible with both MH and HPS bulbs.
- Features a dimmable switch with the ability to adjust watt output for three different settings.
- Has carefully arranged circuit boards and stainless steel ball bearing fans.
- Runs 15% cooler than standard ballasts, ensuring longer life and improved performance.
- Generator-ready with the most stable output frequency of any comparable ballast.
- Results in lower power loss and better overall power management.
- Has a power factor of 99.9% for 100% of the time.
- Far more efficient than older core and coil ballasts.
- Wattage: 400 W.
LightEnerG Mogul Socket (No Leads)
Q100948
- Premium 600 V, 1500 W, 5KV-pulse-rated porcelain mogul base sockets.
- Accommodate all mogul base bulbs in a universal position.
- Mogul cap and washer are included.
LightEnerG Mogul Socket (With Lead)
Q100949
- Premium 600 V, 1500 W, 5KV-pulse-rated porcelain mogul base sockets.
- Accommodate all mogul base bulbs in a universal position.
- Mogul cap, washer, and leads are included.
LightEnerG Econo Cord and Socket Set Assembly with Bare Wire End 14/3 (15 ft / 4.5 m) (300 V)
Q100951
- Comes with a universal position mogul socket.
- Lamp cord includes LightEnerG wire strain relief for added durability.
- Bare wire end.
- Gauge: 14/3.
- Voltage: 300 V.
- Length: 15 feet (4.5 meters).
LightEnerG Lamp Cord Extension, Male & Female 14/3 (10 ft / 3 m) (600 V)
Q100981
- Increases the distance from the ballast to the reflector.
- Used between a ballast and a male lamp cord.
- Features both male and female ends.
- Gauge: 14/3.
- Length: 10 feet (3 meters).
- Voltage: 600 V.
LightEnerG Lamp Cord Extension Male and Female 14/3 (15 ft / 4.5 m) (600 V)
Q100983
- Increases the distance from the ballast to the reflector.
- Used between a ballast and a male lamp cord.
- Features both male and female ends.
- Gauge: 14/3.
- Length: 15 feet (4.5 meters).
- Voltage: 600 V.
LightEnerG Adjusta Height Multi Filament Line (2 / pack)
Q100986
- Adjustable-height reflector suspension system.
- Allows for up to 4.5 ft (1.4 m) of lift in one easy step.
- Sturdy and reliable mechanism.
- Keeps the reflector in place with a simple pull-string.
- Multi filament line.
LightEnerG Male Lamp Cord Extension with 120 V Female 14/3 (1 ft / 30 cm) (300 V)
Q100988
- Feature both male and female ends.
- Connects a ballast and male power cord attached to a socket.
- Gauge: 14/3.
- Length: 1 foot (30 centimeters).
- Voltage: 300 V.
LightEnerG Hybrid MH/HPS Bulb, ET25 (1,000 W)
Q100990
- Grow and flowering lamp designed for high output and performance.
- Features both high pressure sodium (HPS) and metal halide (MH) cores.
- Provides the red light of HPS bulbs and the blue light of MH bulbs.
- Suitable for use throughout the entire growth cycle with just one bulb.
- Emits 117,000 initial lumens.
- Rated for a 12,000-hour life, lasting multiple growth cycles.
- Can be used with any 1,000 W HPS ballast.
LightEnerG Super HPS Bulb ET18 (400 W)
Q100993
- Designed to outperform standard HPS lamps.
- Light spectrum shifted towards the red make them ideal during the flowering stage.
- Added blue spectrum for vegetative growth efficiency.
- Provide more energy which is essential for optimized photosynthetic response.
- Lamps can be used in both the horizontal and vertical position with the appropriate HPS ballast.
- Wattage: 400 W.
LightEnerG Super HPS Conversion Bulb ET25 (940 W)
Q100994
- Designed to operate flawlessly with metal halide lighting systems.
- Allows one-dimensional systems to act as complete lighting systems by accepting both metal halide (MH) and this conversion bulb.
- Provides optimum red spectral energy to promote flowering and fruiting in plants.
- Metal halide bulbs promote plant growth.
- Wattage: 940 W.
LightEnerG Female Power Supply Outlet
Q101010
- Used to attach LightEnerG power cords to ballasts.
- Must be wired by a qualified electrician.
LightEnerG The Flipper 16
Q101019
- Allows an individual ballast to run two separate lights individually.
- Switches back and forth between each light at a user-specified interval.
- Can be controlled by your own timer.
LightEnerG Econo Ballast Box
Q101020
- Used to store HPS and MH ballasts safely and securely.
- Features pre-drilled holes to mount your ballast, capacitors, and ignitors.
- Mounting hardware is included.
LightEnerG Bracket for Cone and Parabolic Reflector, Small Hole (2 / pack)
Q101021
- Used with the LightEnerG Premium or Econo Cord and Socket Set.
- Provides mounting and support for the bulb and shade assembly.
- Proprietary design.
- Small hole.
LightEnerG Cone Reflector 4' (1.2 m), White
Q101023
- Cone shape provides broad light diffusion.
- White finish for maximum light reflection.
- Light weight and easy to assemble.
- Can accommodate all bulbs (not included).
- Includes four-piece base, a bracket to hold a mogul socket and screws.
- Mogul socket and power cord sold separately.
- Size: 4 feet (1.2 meters).
LightEnerG Light Wing 10 Reflector, 9 Bend, 20" x 17" (50 x 43 cm), White (without Cord / Mogul)
Q101025
- Customizable reflector: bend to create the desired lighting for plants.
- Made from German aluminum for 95% reflectivity.
- Ultra-lightweight.
- Size: 20 x 17 inches (50 x 43 centimeters).
- Color: White.