Optimize your indoor growing environment with our high-performance grow tents, systems, and trays, designed for efficiency and durability. Whether you're expanding your grow space or setting up from scratch, we offer a full range of customizable solutions to meet your needs. From compact home setups to larger commercial operations, find the right solutions for professional-grade indoor growing—all under one category.
Can-Filter® has designed and built the Can-Lite™ for convenience and long life. 100% Australian Granulated carbon, aluminum top and bottom, integrated flange and 51% open perforation are features of the Can-Lite filter. The Can-Lite is available in 12 sizes with a CFM range of 89 - 3000. Can-Lite is manufactured in a dedicated carbon filter plant in North America. Each filter is shrink wrapped, boxed and labeled for ease of use.
KDF/Catalytic Carbon Filters reduce iron, sulfur, chlorine, chloramines and heavy metals. Great for city or well water! Bacteriostatic qualities do not allow microbes to breed in filter. Doubles standard green carbon filter. #741622 is 10 in x 2.5 in. #741624 is 20 in x 2.5 in. #741626 is 20 in x 4.5 in.
The pleated sediment filters are cleaned by rinsing regularly with a hose. The filters reduces silt, rust, dirt, sand and sediment. Change filters every 6-12 months. #741654 is 10 in x 2.5 in. #741642 is 10 in x 4.5 in. #741606 is 20 in x 4.5 in.
Botanicare®'s newly expanded line of Low Tide Trays, now offered in black, are a perfect match for growers who need just a little something to put under their plants. These newly designed trays offer a diagonal drainage grid that directs water out of the ray and its in the same footprint as its growing space. The 3.5 in tall Low Tide trays are designed with the solution conserving gardener in mind.
Botanicare® 2 ft x 4 ft Rack Tray is designed to fit standard (48 in L x 18 in D x 69 in H) chrome wire shelving. Utilizing bakers' racks for vertical propagation allows you to increase your production by more than 300% without sacrificing additional square footage. The 2 ft x 4 ft rack is perfect for large-scale microgreen or commercial propagators looking to maximize their production. Specifically designed features allow this tray to sit flat on shelving with a trough that hangs slightly over the edge. The trough reduces standing water. This rack tray will fit four 10 x 20 in propagation trays.
Can-Filter® has designed and built the Can-Lite™ for convenience and long life. 100% Australian Granulated carbon, aluminum top and bottom, integrated flange and 51% open perforation are features of the Can-Lite filter. The Can-Lite is available in 12 sizes with a CFM range of 89 - 3000. Can-Lite is manufactured in a dedicated carbon filter plant in North America. Each filter is shrink wrapped, boxed and labeled for ease of use.
Each Original Can-Filter® uses the most conceptually sound, granular carbon, packed-bed design to deliver the best performing carbon filter on the market. Even with the industry's thickest carbon bed, at 2.5 inches, the Can Original provides for some of the lowest pressure drops, even on smaller size filters. This hefty granular carbon bed effectively makes the Original filter the biggest sponge for VOC removal capable of holding massive amounts of contaminant leading to a lifespan that leaves other filters, frankly, in the dust. The Original Can-Filter are designed for the control of VOCs (paint fumes, hydrocarbons, etc...), odors and other gaseous contaminants. Built with the same proven packed bed design and granular virgin activated carbon we've used for 30 years, this line of time tested activated carbon air filters sets the standard for long life, consistent performance and low pressure drop. Rated at a conservative 0.1 sec contact time, the Original Can-Filter provide excellent value and confidence.
The flange is used to connect the Can-Filter® to the ducting or Can-Fan®; this is for airflow out of the ventilated area. These spun steel flanges come with a foam rubber seal and 6 hex drive self-tapping screws forming a perfect seal with Can-Filter products. Flanges range in size from 4 in to 20 in depending on your specific needs.
The Max-Fan® is the first fan that has been developed with a Computational Fluid Dynamics (CFD) program. CFDs are used for engineering aircraft propulsion engines. The perfectly designed 3D blades of the impeller and stator make this fan extremely powerful and energy efficient. Compared with other inline fans, the efficiency is 50% to 100% higher. 6 inch to 14 inch come pre-wired with an 8 foot 120 V power cord. Can-Fan® bring its innovation to market and sets a new standard for performance. The Max-Fan is a more powerful and efficient fan that takes less energy to run.
Compact and easy-to-use, the Atlas® 9 is a grower's dream. The 15 ft remote sensor allows you to measure the CO2 levels of your garden exactly where you need to measure them. Fuzzy logic capabilities allow you to accurately dose CO2when using a CO2 regulator. The knob that doubles as a button when pushed lets you easily program this product. Enclosure resists dust, rust and moisture. 10 Amps maximum/120 V/ 60 Hz.
The Titan Controls™ Tali™ 3 in 1 VPD Sensor is designed to accurately measure the temperature, humidity, and air pressure of your growing environment. Using these readings, it will accurately calculate the VPD (vapor pressure deficit) for the monitored area. An easy-to-read LED screen allows you to quickly see what’s going on in your environment.
The Titan Controls™ Triton™ Standard Substrate Sensor is designed to accurately measure the EC (electrical conductivity), VWC (volumetric water content), and temperature of your substrate (growing media). Understanding these three metrics will allow you to optimize your irrigation strategy to realize your plants' full potential. The compact design allows this sensor to be easily installed in most applications.
The Apollo® 8 - 24 hr timer is the perfect timing solution for your hydro systems. With two outlets and a 15 Amp capacity, it's easy to set to run your pumps, fans, etc. The Apollo® 8 has 96 non-detachable 15 min trippers and can be configured in numerous timing schedules to meet the most demanding timing requirements. Two (2) outlets. 15 min intervals. Heavy-duty construction. Easy to use and simple to operate. Enclosure resists dust, rust and moisture. Do not use with digital ballasts. 15 Amps maximum/120 V/60 Hz.