CO2 Management

The Gavita® Master Controller EL3 is the next generation in our EL controller series, designed to maximize the performance of your compatible fixtures. The EL3 enables you to set sunrise/sunset dimming, high-temperature dimming, and high-temperature shut-off for all connected fixtures. Best of all, the EL3 lets you build and program entire schedules for your growing cycles. When using a compatible Gavita or Sun System LED fixture, you will be able to view at the individual fixture level, how each one is performing.

The Titan Controls™ Tali™ 3 in 1 VPD Sensor is designed to accurately measure the temperature, humidity, and air pressure of your growing environment. Using these readings, it will accurately calculate the VPD (vapor pressure deficit) for the monitored area. An easy-to-read LED screen allows you to quickly see what’s going on in your environment.

The Titan Controls™ Triton™ Standard Substrate Sensor is designed to accurately measure the EC (electrical conductivity), VWC (volumetric water content), and temperature of your substrate (growing media). Understanding these three metrics will allow you to optimize your irrigation strategy to realize your plants' full potential. The compact design allows this sensor to be easily installed in most applications.

Controls and monitors CO₂ from 0 to 2,000 parts per million (PPM). CO₂ enrichment or CO₂ exhaust features. Easy to setup and operate. Enclosure resists dust, rust and moisture. 5 Amps maximum/120 V/ 60 Hz.

Compact and easy-to-use, the Atlas® 9 is a grower's dream. The 15 ft remote sensor allows you to measure the CO₂ levels of your garden exactly where you need to measure them. Fuzzy logic capabilities allow you to accurately dose CO₂when using a CO₂ regulator. The knob that doubles as a button when pushed lets you easily program this product. Enclosure resists dust, rust and moisture. 10 Amps maximum/120 V/ 60 Hz.

Atlas® 1 CO₂ Monitor/Controller comes with a 25 ft remote sensor. It features adjustable set point and elevation levels, a built-in self calibration function and an integrated photocell that enables operation in daytime hours only, when the plants need CO₂. Simple to use and easy to operate. 15 Amps/120 V/ 60 Hz., The sensor comes factory calibrated for precise CO₂ readings and utilizes low voltage technology.

Preset CO₂ control at 1,500 PPM. Built-in self-calibration feature. Easiest to use CO₂ controller on the market. Simply plug in your CO₂ generator or regulator and you are ready to go. Built-in photocell allows CO₂ enrichment only during daylight hours. Durable powder-coated steel enclosure. 15 Amps maximum/120 V/ 60 Hz. Patent No. D657 748.

Compatible with Titan Controls® CO₂ Controllers or other 120 Volt controllers and timers. Precision accuracy flow meter—0.5 to 15 SCF/hour. Features heavy-duty solenoid valve. High-quality oilless pressure gauge. Includes two plastic tank washers and 12 ft of CO₂ dispensing line. Brass construction for long-lasting dependability and durability. 1 Amp/120 V/ 60 Hz.

CO₂ is scientifically proven to improve the performance of plants! The Ares® Series CO₂ generators provide a clean and efficient way to enrich your grow area with CO₂. Ares® Series CO₂ generators come with everything you need to get your CO₂ system started. Includes: CO₂ generator, AC power supply, hanging chain, ceiling hook, appropriate hose and regulator. All you need to provide is a gas source! 1.5 Amps/120 V/ 60 Hz.

CO₂ is scientifically proven to improve the performance of plants! The Ares® Series CO₂ generators provide a clean and efficient way to enrich your grow area with CO₂. Ares® Series CO₂ generators come with everything you need to get your CO₂ system started. Includes: CO₂ generator, AC power supply, hanging chain, ceiling hook, appropriate hose and regulator. All you need to provide is a gas source! 1.5 Amps/120 V/ 60 Hz.

CO₂ is scientifically proven to improve the performance of plants! The Ares® Series CO₂ generators provide a clean and efficient way to enrich your grow area with CO₂. Ares® Series CO₂ generators come with everything you need to get your CO₂ system started. Includes: CO₂ generator, AC power supply, hanging chain, ceiling hook, appropriate hose and regulator. All you need to provide is a gas source! 1.5 Amps/120 V/ 60 Hz.

CO₂ is scientifically proven to improve the performance of plants! The Ares® Series CO₂ generators provide a clean and efficient way to enrich your grow area with CO₂. Ares® Series CO₂ generators come with everything you need to get your CO₂ system started. Includes: CO₂ generator, AC power supply, hanging chain, ceiling hook, appropriate hose and regulator. All you need to provide is a gas source! 1.5 Amps/120 V/ 60 Hz.

CO₂ is scientifically proven to improve the performance of plants! The Ares® Series CO₂ generators provide a clean and efficient way to enrich your grow area with CO₂. Ares® Series CO₂ generators come with everything you need to get your CO₂ system started. Includes: CO₂ generator, AC power supply, hanging chain, ceiling hook, appropriate hose and regulator. All you need to provide is a gas source! 1.5 Amps/120 V/ 60 Hz.

CO₂ is scientifically proven to improve the performance of plants! The Ares® Series CO₂ generators provide a clean and efficient way to enrich your grow area with CO₂. Ares® Series CO₂ generators come with everything you need to get your CO₂ system started. Includes: CO₂ generator, AC power supply, hanging chain, ceiling hook, appropriate hose and regulator. All you need to provide is a gas source! 1.5 Amps/120 V/ 60 Hz.

• The perfect lighting controller solution.
• Plug and play: compatible with all DLI fixtures.
• Four (4) fully-independent zones.
• Controls over 800 fixtures.
• Auto-dimming safety feature.
• Digital operation ensures consistent output.
• Certifications: ETL
• IP rating: IP20.
• Product dimensions: 5.3 x 3.4 x 1.4 inches (13.5 x 8.5 x 3.5 centimeters).
• Product weight: 0.6 pounds (0.27 kilograms).
• Power: < 60 watts.
• Voltage range: 100 - 240 volts.

• Provides real-time, accurate, and reliable temperature monitoring for precise control of your growing environment.
• Seamlessly integrates with the DLM-4 Zone Controller, allowing for centralized control and automation.
• Designed for easy installation and compatibility with various grow room setups.
• Durable construction ensures long-lasting performance.
• Designed by Dutch Lighting Innovations™ (DLI), a leader in innovative horticultural solutions.

This controller will allow you to precisely monitor and control the environment in your grow room. Featuring an easy-to-use analog interface this digital controller is easy to program and use. Each set point (temperature humidity and CO2) are programmed using a set of dedicated knobs. Readings are displayed on easy-to-read digital displays. The sensor that measures the temperature humidity light and CO2 levels in your room attaches to the controller with a 15 ft cord. Enclosure resists dust

The Eos® Complete Digital Humidity Controller allows you to accurately and efficiently control the humidity levels in your garden. Set your desired humidity level and the controller will activate and deactivate humidifying and dehumidifying equipment appropriately. This controller also features low temperature protection in the event that achieving the desired humidity level results in an undesirable temperature. This Eos® unit features a 15 ft remote sensor that monitors your temperature and humidity levels. The easy-to-use analog style interface makes programming the controller a simple task. Day and night settings allow for accurate environmental control.

The Eos® 2 Digital Humidity Controller makes dialing in your room's environment a breeze. It can be used to activate a device to increase humidity in your room or decrease the humidity in your room. The Eos® 2 utilizes a high-quality humidity sensor as well as a photocell for day and night control. Settings are easily programmed with the knob that doubles as a button to change settings. A slide switch controls whether the controller is running in Day, Night or 24 hr mode. 10 Amps/ 120 V/ 60 Hz.

Temperature control range is 55°F to 95°F. Controls cooling or heating equipment. Day and night settings keep temperature within 4°F of set point. 6 ft temperature probe is accurate to within 2°F. Enclosure protects internal components from dust, rust and moisture. ETL listed for commercial applications. 15 Amps/ 120 V/ 60 Hz.

Controller turns off your lights if high temperature exceeds set point. Built-in 1 to 30 min hot start delay with HOLD feature. 6 foot temperature probe is accurate to within 2°F. Protects your garden and your plants. Enclosure resists dust, rust and moisture. 15 Amps maximum/ 120 V/ 60 Hz.

This CO₂ Rain® System includes 25 ft of laser-drilled 1/8 in tubing, 6 eye hooks, 1/8 in plastic T fitting and instructions. Additional 100 ft roll of tubing is also available.

Replacement parts for Titan Controls® CO₂ Regulators. The white plastic washers are replacements for the Titan CO₂ Regulator.

This CO₂ Rain® System includes 25 ft of laser-drilled 1/8 in tubing, 6 eye hooks, 1/8 in plastic T fitting and instructions. Additional 100 ft roll of tubing is also available.

LP and NG replacement burners. Made specifically for to work with Titan Controls® Ares® CO₂ generators.

Includes:

• Two TEROS ONE substrate sensors.
• One CLIMATE ONE climate station.
• One GATEWAY data hub*.
• Accessory kits for GATEWAY and CLIMATE ONE.
• Substrate sensor alignment tool.
• Three years of AROYA software access for three users (standard pricing after).
• 60 days of rolling cloud data storage*.
• Irrigation control integration (controller not included).

• Includes sensor nose with one TEROS ONE sensor.
• Delivers 10x more precise electrical conductivity measurements.
• Measures water content and volumetric water content.
• Tracks substrate temperature for optimal root zone management.
• Provides continuous data synced to AROYA every three minutes.
• Costs less with enhanced features after extensive R&D.
• Seamlessly integrates with AROYA software platforms.
• Designed for durability with corrosion-resistant materials.
• Offers easy installation with stainless steel needle design.
• Features automatic calibration for various grow media.

!! NOTE: AROYA GO bundle or AROYA Core with an included software license is a requirement for using and purchasing this product.

• Includes sensor nose with two TEROS ONE sensors.
• Delivers 10x more precise electrical conductivity measurements.
• Measures water content and volumetric water content.
• Tracks substrate temperature for optimal root zone management.
• Provides continuous data synced to AROYA every three minutes.
• Costs less with enhanced features after extensive R&D.
• Seamlessly integrates with AROYA software platforms.
• Designed for durability with corrosion-resistant materials.
• Offers easy installation with stainless steel needle design.
• Features automatic calibration for various grow media.

!! NOTE: AROYA GO bundle or AROYA Core with an included software license is a requirement for using and purchasing this product.

• Monitors air temperature, relative humidity, VPD, and ambient CO₂ levels.
• Provides accurate VPD calculations with precise temperature and humidity data.
• Samples ambient CO₂ five times per minute for precise CO₂ control.
• Integrates with the AROYA app for automatic data syncing every three minutes.
• Easy installation with included pulley system and hanging hooks.
• Rugged construction for durability in demanding grow environments.
• Wireless BLE mesh network connectivity for reliable data transmission.
• 48V PoE power supply with 3W peak consumption.
• Trade-in discount of 25% for upgrading from an old AROYA climate station.
• Measures temperature (-10 to 50 °C) and CO₂ (0 to 2,000 ppm) with high accuracy.