Chillers, Heaters, & Purification

• For use with Hydro-Logic® micRO-75™, Stealth-RO™, or smallBoy®.
• Diameter: 1/4 inch OD.
• Length: 50 foot (15.24 meter) roll.
• Color: Black.
• 10 per case.

• Fitting kit for the Hydro-Logic® Evolution RO1000™.
• Replacement parts.

The Evolution RO1000™ KDF/Catalytic Carbon pre-filter is the standard carbon pre-filter included with system. For chlorine and chloramines reduction for city water. Also for well water for iron hydrogen sulfide and heavy metals reduction. The Evolution RO1000™ Membrane Element is the standard membrane included with system. 2 needed for system.

Suitable for use with reservoirs, hydroponic systems and aquariums. Features a commercial-grade titanium heat exchanger for optimum performance and corrosion resistance. High-quality Japanese compressor is extremely efficient and reliable. Heavy-duty galvanized steel housing with a durable powder-coated finish. Digital LCD display allows for easy operation. Remote temperature controller with a 30 ft cord allows user to monitor and adjust chiller settings when the unit is installed in a remote location. Auto restart and temperature memory in the event of a power failure. Uses environmentally friendly R410A refrigerant. Comes with 2 fittings to allow chiller to be plumbed with 1 in hard PVC pipe or 1 in flexible tubing.

Suitable for use with reservoirs, hydroponic systems and aquariums. Features a commercial-grade titanium heat exchanger for optimum performance and corrosion resistance. High-quality Japanese compressor is extremely efficient and reliable. Heavy-duty galvanized steel housing with a durable powder-coated finish. Digital LCD display allows for easy operation. Remote temperature controller with a 30 ft cord allows user to monitor and adjust chiller settings when the unit is installed in a remote location. Auto restart and temperature memory in the event of a power failure. Uses environmentally friendly R410A refrigerant. Comes with 2 fittings to allow chiller to be plumbed with 1 in hard PVC pipe or 1 in flexible tubing.

The pleated sediment filters are cleaned by rinsing regularly with a hose. The filters reduces silt, rust, dirt, sand and sediment. Change filters every 6-12 months. #741654 is 10 in x 2.5 in. #741642 is 10 in x 4.5 in. #741606 is 20 in x 4.5 in.

KDF/Catalytic Carbon Filters reduce iron, sulfur, chlorine, chloramines and heavy metals. Great for city or well water! Bacteriostatic qualities do not allow microbes to breed in filter. Doubles standard green carbon filter. #741622 is 10 in x 2.5 in. #741624 is 20 in x 2.5 in. #741626 is 20 in x 4.5 in.

This pump is designed to be installed before the Stealth RO to boost the inlet pressure. Wells and low pressure (below 40 PSI) water sources can benefit greatly from this pump. It boosts the pressure significantly, allowing the Stealth RO to run with higher flow and more efficiency while having better TDS removal. The pump is designed for long service life and runs very quietly. Comes with a high pressure switch and operates at 110V.

Suitable for use with reservoirs, hydroponic systems and aquariums. Features a commercial-grade titanium heat exchanger for optimum performance and corrosion resistance. High-quality Japanese compressor is extremely efficient and reliable. Heavy-duty galvanized steel housing with a durable powder-coated finish. Digital LCD display allows for easy operation. Remote temperature controller with a 30 ft cord allows user to monitor and adjust chiller settings when the unit is installed in a remote location. Auto restart and temperature memory in the event of a power failure. Uses environmentally friendly R410A refrigerant. Comes with 2 fittings to allow chiller to be plumbed with 1 in hard PVC pipe or 1 in flexible tubing.

Hydro-Logic® Chlorashield membranes remove 100% of chloramine and are great for city water. Rated at 1 GPM down to 1 micron. They are made in the USA and have a low pressure drop combined with exceptionally high dirt holding capacity. HGC728772 is for Evolution-RO systems (20 in x 2.5 in) and should be replaced after 2 500 gallons. HGC741668 is for TallBoy systems (20 in x 2.75 in) and should be replaced after 6 000 gallons. HGC741640 is for PreEvolution systems (10 in x 4.5 in) and should be replaced after 7 500 gallons. HGC741700 is for smallBoy/Stealth-RO systems (9.75 in x 2.75 in) and should be replaced after 1 500 gallons when used with Stealth-RO systems and 3 000 gallons when used in smallBoy systems.

The pleated sediment filters are cleaned by rinsing regularly with a hose. The filters reduces silt, rust, dirt, sand and sediment. Change filters every 6-12 months. #741654 is 10 in x 2.5 in. #741642 is 10 in x 4.5 in. #741606 is 20 in x 4.5 in.