Products tagged with 'Drip Irrigation'

The unique design of the Netafim Techflow Emitters regulates flow and provides continuous self-cleaning action during operation. These emitters have a 2.2 PSI internal check valve that helps prevent low emitter drainage holding back up to a 5 ft column of water. The anti-siphon operation prevents contaminants from being drawn into the emitter. The Techflow Emitters are pressure compensating and deliver the same flow from 14.5 to 58 PSI. Recommended minimum filtration of 120 mesh. Pair the Techfl

The Netafim Multi-Outlet Dripper assembly allows you to operate multiple drip stake assemblies from one drip emitter. The MOD comes preassembled with a 2-way flat manifold two 36 in UV Polyethylene Tubing leads and two 6 3/8 in standard Angle Arrow Drippers. Pair the MOD with the Netafim 1 GPH (HGC747708) or 2 GPH (HGC747746) Techflow Emitters.

The Netafim Woodpecker Junior Drippers have a barbed outlet and CNL check valve that helps prevent low emitter drainage. The anti-siphon operation prevents contaminants from being drawn into the emitter. These Woodpecker Drippers are pressure compensating and deliver the same flow from 12 - 58 PSI. The barbed outlet fits the Netafim Super Flex UV White PE Tubing (HGC747561).

Netafim single dripper stake assemblies will reduce setup time considerably. This 36 or 48 inch assembly will install right where you need it. Dripper assembly uses a 3.2 or 6.6 GPH pressure compensating emitter with CNL check valve 36 or 48 inches of Super Flex Tubing. Minimum operating pressure is 22 PSI. Pair the 3.2 GPH assemblies with the Netafim single pattern standard spray stakes (HGC747735) and the 6.6 GPH assemblies with the Netafim single pattern (HGC747736) or double pattern (HGC747

The Hydro Flow® Rain Ring® is a great solution for automating your garden. Its versatility allows you to effectively water soil as well as hydroponic growing media without using small irrigation lines and drip stakes. The Rain Ring® has several strategically positioned distribution holes to fully moisten your grow media. Its heavy duty construction allows them to be used indoors under HID lighting and in full sun outdoor applications. Soak and rinse between cycles for years of trouble free use.

Netafim Single dripper stake assemblies will reduce set up time considerably. This 36 or 48 inch assembly will install right where you need it. Dripper assembly uses a 0.3 or 0.5 gph pressure compensating emitter with CNL check vale 36 or 48 inches of Super Flex Tubing and an angled barbed stake. Minimum operating pressure is 10 psi.