Fluence

Fluence Wireless Flex Dimming delivers simplicity, flexibility, and cost savings to your grow operation by replacing dimming cables to each light fixture with wireless control. Wireless Flex Dimming realizes tremendous labor costs savings from reduced installation time, eliminating potential wiring errors. Simply plug a Wireless Flex Dimming Receiver into the dimming port of each Fluence light fixture, install a Wireless Flex Dimming 0-10 V adapter, and connect the 0-10 V dimming control per zone.

Wireless Flex Dimming features qualified Bluetooth mesh technology enabled by SILVAIR that is fully compatible with any 0-10 V dimmer or environmental controllers. Wireless Flex Dimming is easy to configure and enables HPS to LED retrofit growers to add precise dimming control without installing new wiring, maximizing ROI.

• Enables HPS to LED retrofit growers to add precise dimming control without installing new wiring.
• Replaces dimming cables to each light fixture with wireless control.
• Delivers simplicity, flexibility, and cost savings to your grow operation.
• Eliminates potential wiring errors.
• Features qualified Bluetooth mesh technology enabled by SILVAIR.
• Fully compatible with any 0-10 V dimmer or environmental controllers.

The Fluence VYPR 3x & DUO 3x2 features Fluence’s diversified PhysioSpec™ spectra and market-leading efficacies up to 3.8 μmol/J, enabling the replacement of HPS lights with significant energy savings. It features DUO remote and cradle mounts, offering enhanced design flexibility and enabling growers in challenging or intricate lighting environments. Compared to VYPR 3p, VYPR DUO 3x2 cradle mount emits the same amount of light but at a half of the VYPR 3p fixture length. This allows the installation of many more fixtures on a single truss, drastically increasing the available light per truss for high PPFD applications.

Built upon patented thermal management technologies, it provides a cost-effective solution for grow spaces with constrained ceiling heights, such as indoor or low greenhouses.

The Fluence VYPR 3x & DUO 3x2 features Fluence’s diversified PhysioSpec™ spectra and market-leading efficacies up to 3.8 μmol/J, enabling the replacement of HPS lights with significant energy savings. It features DUO remote and cradle mounts, offering enhanced design flexibility and enabling growers in challenging or intricate lighting environments. Compared to VYPR 3p, VYPR DUO 3x2 cradle mount emits the same amount of light but at a half of the VYPR 3p fixture length. This allows the installation of many more fixtures on a single truss, drastically increasing the available light per truss for high PPFD applications.

Built upon patented thermal management technologies, it provides a cost-effective solution for grow spaces with constrained ceiling heights, such as indoor or low greenhouses.

• Flexible mounting and easy installation.
• Market-leading efficacies and high-light output per fixture.
• Compact power supply and linear design.
• Powerful and efficient growing all year long.
• PhysioSpec™ Spectra: BROAD R4.
• OUTPUT PPF (μmol/s) (400-700nm): 1,690
• OUTPUT PF (μmol/s) (400-800nm): 1,730
• Efficacy (PE) (µmol/J): 2.7
• Efficacy (PE) (µmol/J) @50% Dim: 2.9
• Dimensions: (LxWxH): 35.5 x 4.2 x 3.6 in (900 x 107 x 91 mm)
• Weight: 8.4 lbs (3.8 kg)
• Input Voltage: 200V to 480V AC.
• W AC: 634W
• Pack Type: Bulk pack.

• Flexible mounting and easy installation.
• Market-leading efficacies and high-light output per fixture.
• Compact power supply and linear design.
• Powerful and efficient growing all year long.
• PhysioSpec™ Spectra: BROAD R4.
• OUTPUT PPF (μmol/s) (400-700nm): 1,690
• OUTPUT PF (μmol/s) (400-800nm): 1,730
• Efficacy (PE) (µmol/J): 2.7
• Efficacy (PE) (µmol/J) @50% Dim: 2.9
• Dimensions: (LxWxH): 35.5 x 4.2 x 3.6 in (900 x 107 x 91 mm)
• Weight: 8.4 lbs (3.8 kg)
• Input Voltage: 200V to 480V AC.
• W AC: 634W
• Pack Type: Bulk pack.

• Flexible mounting and easy installation.
• Market-leading efficacies and high-light output per fixture.
• Compact power supply and linear design.
• Powerful and efficient growing all year long.
• PhysioSpec™ Spectra: BROAD R4
• OUTPUT PPF (μmol/s) (400-700nm): 2,290
• OUTPUT PF (μmol/s) (400-800nm): 2,340
• Efficacy (PE) (µmol/J): 2.8
• Efficacy (PE) (µmol/J) @50% Dim: 2.9
• Dimensions (LxWxH): 46.1 x 4.2 x 3.6 in (1,170 x 107 x 91 mm)
• Weight: 11.7 lbs (5.3 kg)
• Input Voltage: 200V to 480V AC
• W AC: 825W
• Pack Type: Bulk pack
•  

• Flexible mounting and easy installation.
• Market-leading efficacies and high-light output per fixture.
• Compact power supply and linear design.
• Powerful and efficient growing all year long.
• PhysioSpec™ Spectra: BROAD R4
• OUTPUT PPF (μmol/s) (400-700nm): 2,290
• OUTPUT PF (μmol/s) (400-800nm): 2,340
• Efficacy (PE) (µmol/J): 2.8
• Efficacy (PE) (µmol/J) @50% Dim: 2.9
• Dimensions (LxWxH): 46.1 x 4.2 x 3.6 in (1,170 x 107 x 91 mm)
• Weight: 11.7 lbs (5.3 kg)
• Input Voltage: 200V to 480V AC
• W AC: 825W
• Pack Type: Bulk pack
•  

• Enables the replacement of HPS lights with significant energy savings.
• Ideal for distributing light uniformly in grow environments with constrained ceiling heights.
• Also suitable for low DLI crops, and for extension of the natural photoperiod.
• Light output PPF: 876 µmol/s.
• AC power: 336 @ 277 V AC (W).
• Efficacy: 2.6 µmol/J @ 277 V AC.
• Certifications: ETL, cETL, CE, Wet Location.
• Spectrum: PhysioSpec™ BROAD R4 Indoor.
• Size (L x W x H): 24.09 x 2.91 x 3.23 inches (612 x 74 x 82 millimeters).

The Fluence VYPR 3x features market-leading efficacies up to 3.7 µmol/J, enabling the replacement of HPS lights with significant energy savings. At a half of VYPR 3p’s size and power, VYPR 3x is ideal for distributing light uniformly in grow environments with constrained ceiling heights. VYPR 3x is also suitable for low DLI crops, and for extension of the natural photoperiod.

Combined with Fluence’s beam widening reflectors, VYPR 3x further improves light uniformity and reduces the number of fixtures required in a given cultivation area, lowering the capital investment and accelerating the LED adoption in horticulture lighting.

• Enables the replacement of HPS lights with significant energy savings.
• Ideal for distributing light uniformly in grow environments with constrained ceiling heights.
• Also suitable for low DLI crops, and for extension of the natural photoperiod.
• Light output PPF: 888 µmol/s.
• AC power: 335 @ 277 V AC (W).
• Efficacy: 2.7 µmol/J @ 277 V AC.
• Certifications: ETL, cETL, CE, Wet Location.
• Spectrum: PhysioSpec™ BROAD R3 Greenhouse.
• Size (L x W x H): 24.09 x 2.91 x 3.23 inches (612 x 74 x 82 millimeters).

This optional reflector kit for the Fluence VYPR 3p provides a wider light pattern and uniform PPFD at plant canopy.

The Fluence VYPR 3p offers high fixture PPF up to 2,330 µmol/s and high efficacy up to 3.8 µmol/s, enabling the direct replacement of a 1,000 W HPS fixture at more than 40% energy savings.

An optional reflector kit provides a wider light pattern and uniform PPFD at plant canopy.

The Fluence VYPR 3p offers high fixture PPF up to 2,330 µmol/s and high efficacy up to 3.8 µmol/s, enabling the direct replacement of a 1,000 W HPS fixture at more than 40% energy savings.

An optional reflector kit provides a wider light pattern and uniform PPFD at plant canopy.

The Fluence VYPR 3p offers high fixture PPF up to 2,330 µmol/s and high efficacy up to 3.8 µmol/s, enabling the direct replacement of a 1,000 W HPS fixture at more than 40% energy savings.

An optional reflector kit provides a wider light pattern and uniform PPFD at plant canopy.

The Fluence VYPR 3p offers high fixture PPF up to 2,330 µmol/s and high efficacy up to 3.8 µmol/s, enabling the direct replacement of a 1,000 W HPS fixture at more than 40% energy savings.

An optional reflector kit provides a wider light pattern and uniform PPFD at plant canopy.

The Fluence VYPR 3p offers high fixture PPF up to 2,330 µmol/s and high efficacy up to 3.8 µmol/s, enabling the direct replacement of a 1,000 W HPS fixture at more than 40% energy savings.

An optional reflector kit provides a wider light pattern and uniform PPFD at plant canopy.

The Fluence VYPR 3p offers high fixture PPF up to 2,330 µmol/s and high efficacy up to 3.8 µmol/s, enabling the direct replacement of a 1,000 W HPS fixture at more than 40% energy savings.

An optional reflector kit provides a wider light pattern and uniform PPFD at plant canopy.

The Fluence VYPR 2x LED is the perfect greenhouse or indoor high-ceiling grow light for low DLI crops and operations looking to extend their photoperiod. Ideal for close-range deployments to maximize uniformity in low ceiling rooms, it emits PPF up to 900 µmol/s and has an energy-efficiency rating of 2.6 µmol/J.

From broad white to high red, Fluence PhysioSpec™ offers BROAD and DUAL spectrum options on VYPR Series. This flexibility prioritizes the grower’s needs in optimizing spectral content and light levels for any crop, at any growth stage, in any geographic location.

With six spectra available, VYPR Series top lights offer higher efficacies (up to 3.8 µmol/J) and higher photosynthetic photon flux (PPF) (up to 2,330 µmol/s) per fixture over comparable lighting technologies.

VYPR is a passively cooled device, relying solely on ambient conditions (and breakthrough engineering) for heat dissipation. VYPR is suitable for operation in still ambient temperatures from -40°C (-40°F) to 40°C (104°F); however, it is recommended at least one ft3/s of airflow to ensure efficient cooling. VYPR 2p has an operating temperature of 50°C (122°F) above ambient.

VYPR is designed as a greenhouse grow light or a sole-source indoor light, it should not be deployed outdoors or in direct sunlight.

The Fluence VYPR 2x LED is the perfect greenhouse or indoor high-ceiling grow light for low DLI crops and operations looking to extend their photoperiod. Ideal for close-range deployments to maximize uniformity in low ceiling rooms, it emits PPF up to 900 µmol/s and has an energy-efficiency rating of 2.6 µmol/J.

From broad white to high red, Fluence PhysioSpec™ offers BROAD and DUAL spectrum options on VYPR Series. This flexibility prioritizes the grower’s needs in optimizing spectral content and light levels for any crop, at any growth stage, in any geographic location.

With six spectra available, VYPR Series top lights offer higher efficacies (up to 3.8 µmol/J) and higher photosynthetic photon flux (PPF) (up to 2,330 µmol/s) per fixture over comparable lighting technologies.

VYPR is a passively cooled device, relying solely on ambient conditions (and breakthrough engineering) for heat dissipation. VYPR is suitable for operation in still ambient temperatures from -40°C (-40°F) to 40°C (104°F); however, it is recommended at least one ft3/s of airflow to ensure efficient cooling. VYPR 2p has an operating temperature of 50°C (122°F) above ambient.

VYPR is designed as a greenhouse grow light or a sole-source indoor light, it should not be deployed outdoors or in direct sunlight.

The Fluence VYPR 2x LED is the perfect greenhouse or indoor high-ceiling grow light for low DLI crops and operations looking to extend their photoperiod. Ideal for close-range deployments to maximize uniformity in low ceiling rooms, it emits PPF up to 900 µmol/s and has an energy-efficiency rating of 2.6 µmol/J.

From broad white to high red, Fluence PhysioSpec™ offers BROAD and DUAL spectrum options on VYPR Series. This flexibility prioritizes the grower’s needs in optimizing spectral content and light levels for any crop, at any growth stage, in any geographic location.

With six spectra available, VYPR Series top lights offer higher efficacies (up to 3.8 µmol/J) and higher photosynthetic photon flux (PPF) (up to 2,330 µmol/s) per fixture over comparable lighting technologies.

VYPR is a passively cooled device, relying solely on ambient conditions (and breakthrough engineering) for heat dissipation. VYPR is suitable for operation in still ambient temperatures from -40°C (-40°F) to 40°C (104°F); however, it is recommended at least one ft3/s of airflow to ensure efficient cooling. VYPR 2p has an operating temperature of 50°C (122°F) above ambient.

VYPR is designed as a greenhouse grow light or a sole-source indoor light, it should not be deployed outdoors or in direct sunlight.

The Fluence VYPR 2x LED is the perfect greenhouse or indoor high-ceiling grow light for low DLI crops and operations looking to extend their photoperiod. Ideal for close-range deployments to maximize uniformity in low ceiling rooms, it emits PPF up to 900 µmol/s and has an energy-efficiency rating of 2.6 µmol/J.

From broad white to high red, Fluence PhysioSpec™ offers BROAD and DUAL spectrum options on VYPR Series. This flexibility prioritizes the grower’s needs in optimizing spectral content and light levels for any crop, at any growth stage, in any geographic location.

With six spectra available, VYPR Series top lights offer higher efficacies (up to 3.8 µmol/J) and higher photosynthetic photon flux (PPF) (up to 2,330 µmol/s) per fixture over comparable lighting technologies.

VYPR is a passively cooled device, relying solely on ambient conditions (and breakthrough engineering) for heat dissipation. VYPR is suitable for operation in still ambient temperatures from -40°C (-40°F) to 40°C (104°F); however, it is recommended at least one ft3/s of airflow to ensure efficient cooling. VYPR 2p has an operating temperature of 50°C (122°F) above ambient.

VYPR is designed as a greenhouse grow light or a sole-source indoor light, it should not be deployed outdoors or in direct sunlight.

• The perfect greenhouse or indoor high-ceiling grow light for low DLI crops and operations looking to extend their photoperiod.
• Ideal for close-range deployments to maximize uniformity in low ceiling rooms.
• Spectrums: PhysioSpec Greenhouse™ or PhysioSpec Indoor™.
• Light Output PPF: 900 µmol/s.
• Efficacy: 2.6 µmol/J.
• Light Distribution 120°.
• Mounting Height ≥ 18 inches (45.7 centimeters) above canopy.
• Certifications: UL 8800, UL 1598 Wet-Location Rated, IP66, DLC.
• Actual dimensions (L x W x H): 21.4 x 2.9 x 3.3 inches (61.2 x 7.4 x 8.3 centimeters).

• A full-cycle top lighting LED solution for high bay growing environments.
• Ideal for greenhouse supplemental lighting or indoor sole-source lighting.
• Builds on previous generation’s performance with nearly a 45% increase in PPF levels and a 18% increase in efficacy.
• Spectrum: PhysioSpec Indoor™.
• Light Output PPF: 1,700 µmol/s.
• Efficacy: 2.7 µmol/J.
• AC Input Power: 631 W @ 277 V AC.
• AC Input Voltage: 120 - 277V AC, 347 - 480V AC, 50/60 Hz.
• Light Distribution 120°.
• Mounting Height ≥ 18 inches (45.7 centimeters) above canopy.
• Certifications: UL 8800, UL 1598 Wet-Location, DLC.
• Actual dimensions (L x W x H): 46.1 x 2.9 x 3.3 inches (117.2 x 7.4 x 8.3 centimeters).

• A full-cycle top lighting LED solution for high bay growing environments.
• Ideal for greenhouse supplemental lighting or indoor sole-source lighting.
• Builds on previous generation’s performance with nearly a 45% increase in PPF levels and a 18% increase in efficacy.
• Spectrum: PhysioSpec Indoor™.
• Light Output PPF: 1,700 µmol/s.
• Efficacy: 2.7 µmol/J.
• AC Input Power: 631 W @ 277 V AC.
• AC Input Voltage: 120 - 277V AC, 347 - 480V AC, 50/60 Hz.
• Light Distribution 120°.
• Mounting Height ≥ 18 inches (45.7 centimeters) above canopy.
• Certifications: UL 8800, UL 1598 Wet-Location, DLC.
• Actual dimensions (L x W x H): 46.1 x 2.9 x 3.3 inches (117.2 x 7.4 x 8.3 centimeters).

• A full-cycle top lighting LED solution for high bay growing environments.
• Ideal for greenhouse supplemental lighting or indoor sole-source lighting.
• Builds on previous generation’s performance with nearly a 45% increase in PPF levels and a 18% increase in efficacy.
• Spectrum: PhysioSpec Indoor™.
• Light Output PPF: 1,700 µmol/s.
• Efficacy: 2.7 µmol/J.
• AC Input Power: 631 W @ 277 V AC.
• AC Input Voltage: 120 - 277V AC, 347 - 480V AC, 50/60 Hz.
• Light Distribution 120°.
• Mounting Height ≥ 18 inches (45.7 centimeters) above canopy.
• Certifications: UL 8800, UL 1598 Wet-Location, DLC.
• Actual dimensions (L x W x H): 46.1 x 2.9 x 3.3 inches (117.2 x 7.4 x 8.3 centimeters).

• A full-cycle top lighting LED solution for high bay growing environments.
• Ideal for greenhouse supplemental lighting or indoor sole-source lighting.
• Builds on previous generation’s performance with nearly a 45% increase in PPF levels and a 18% increase in efficacy.
• Spectrum: PhysioSpec Greenhouse™.
• Light Output PPF: 1,700 µmol/s.
• Efficacy: 2.7 µmol/J.
• AC Input Power: 631 W @ 277 V AC.
• AC Input Voltage: 120 - 277V AC, 347 - 480V AC, 50/60 Hz.
• Light Distribution 120°.
• Mounting Height ≥ 18 inches (45.7 centimeters) above canopy.
• Certifications: UL 8800, UL 1598 Wet-Location, DLC.
• Actual dimensions (L x W x H): 46.1 x 2.9 x 3.3 inches (117.2 x 7.4 x 8.3 centimeters).

• A full-cycle top lighting LED solution for high bay growing environments.
• Ideal for greenhouse supplemental lighting or indoor sole-source lighting.
• Builds on previous generation’s performance with nearly a 45% increase in PPF levels and a 18% increase in efficacy.
• Spectrum: PhysioSpec Greenhouse™.
• Light Output PPF: 1,700 µmol/s.
• Efficacy: 2.7 µmol/J.
• AC Input Power: 631 W @ 277 V AC.
• AC Input Voltage: 120 - 277V AC, 347 - 480V AC, 50/60 Hz.
• Light Distribution 120°.
• Mounting Height ≥ 18 inches (45.7 centimeters) above canopy.
• Certifications: UL 8800, UL 1598 Wet-Location, DLC.
• Actual dimensions (L x W x H): 46.1 x 2.9 x 3.3 inches (117.2 x 7.4 x 8.3 centimeters).

• A full-cycle top lighting LED solution for high bay growing environments.
• Ideal for greenhouse supplemental lighting or indoor sole-source lighting.
• Builds on previous generation’s performance with nearly a 45% increase in PPF levels and a 18% increase in efficacy.
• Spectrum: PhysioSpec Indoor™.
• Length: 46.1 inches (117.2 centimeters).
• Lightbar only.

• A full-cycle top lighting LED solution for high bay growing environments.
• Ideal for greenhouse supplemental lighting or indoor sole-source lighting.
• Builds on previous generation’s performance with nearly a 45% increase in PPF levels and a 18% increase in efficacy.
• Spectrums: PhysioSpec Greenhouse™ or PhysioSpec Indoor™.
• Light Output PPF: 1,700 µmol/s.
• Efficacy: 2.7 µmol/J.
• AC Input Power: 631 W @ 277 V AC.
• AC Input Voltage: 120 - 277V AC, 347 - 480V AC, 50/60 Hz.
• Light Distribution 120°.
• Mounting Height ≥ 18 inches (45.7 centimeters) above canopy.
• Certifications: UL 8800, UL 1598 Wet-Location, DLC.
• Actual dimensions (L x W x H): 46.1 x 2.9 x 3.3 inches (117.2 x 7.4 x 8.3 centimeters).

The Fluence SPYDR FANG is a high-performance LED grow light for craft cultivation. Enabling micro-growers to command their grow with an optimized 1600 µmol/s (PPF) output, PhysioSpec™ Broad R4 spectrum, and included 0-100% dimmer for easy control and full-cycle cultivation.

The Fluence SPYDR FANG is a high-performance LED grow light for craft cultivation. Enabling micro-growers to command their grow with an optimized 1600 µmol/s (PPF) output, PhysioSpec™ Broad R4 spectrum, and included 0-100% dimmer for easy control and full-cycle cultivation.

• High-performance LED grow light designed for craft cultivation.
• Optimized 1,600 µmol/s (PPF) output.
• PhysioSpec™ Broad R4 spectrum for full-cycle cultivation.
• 0-100% dimmer included for easy light intensity control.
• Package includes a 6-foot (1.8-meter), 120-volt power cord.
• Size: 47 inches (1,194 millimeters).

• High-performance LED grow light designed for craft cultivation.
• Optimized 1,600 µmol/s (PPF) output.
• PhysioSpec™ Broad R4 spectrum for full-cycle cultivation.
• 0-100% dimmer included for easy light intensity control.
• Package includes a 6-foot (1.8-meter) power cord.

• Early-development, top-lighting solution for commercial cultivation.
• Full-cycle top-lighting solution for home hobbyists.
• Designed for use without CO₂ supplementation at ambient conditions (~400 ppm).
• Light output PPF: 860 µmol/s.
• Efficacy: 2.51 µmol/J @ 277 AC.
• AC input power: 342 W @ 277 V AC.
• Certifications: UL 8800, UL 1598 Wet Location, DLC.
• Spectrum: PhysioSpec Indoor™.
• Length: 47 inches (1,194 millimeters).
• Width: 42.8 inches (1,087 millimeters).
• PSU Power Supply: 347-400 V.

• Early-development, top-lighting solution for commercial cultivation.
• Full-cycle top-lighting solution for home hobbyists.
• Designed for use without CO₂ supplementation at ambient conditions (~400 ppm).
• Light output PPF: 860 µmol/s.
• Efficacy: 2.51 µmol/J @ 277 AC.
• AC input power: 342 W @ 277 V AC.
• Certifications: UL 8800, UL 1598 Wet Location, DLC.
• Spectrum: PhysioSpec Indoor™.
• Length: 47 inches (1,194 millimeters).
• Width: 42.8 inches (1,087 millimeters).
• PSU Power Supply: 120-277 V.

• Early-development, top-lighting solution for commercial cultivation.
• Full-cycle top-lighting solution for home hobbyists.
• Designed for use without CO₂ supplementation at ambient conditions (~400 ppm).
• Spectrum: PhysioSpec Indoor™.
• Length: 47 inches (1,194 millimeters).
• Lightbar only.

The Fluence SPYDR 2x is an early-development, top-lighting solution for commercial cultivation, or a full-cycle top-lighting solution for home hobbyists cultivating without CO₂ supplementation at ambient conditions around 400 ppm.

• Early-development, top-lighting solution for commercial cultivation.
• Full-cycle top-lighting solution for home hobbyists.
• Designed for use without CO₂ supplementation at ambient conditions (~400 ppm).
• Size: 40 inches (101 centimeters).
• Voltage: 347 to 480 volts.

• Early-development, top-lighting solution for commercial cultivation.
• Full-cycle top-lighting solution for home hobbyists.
• Designed for use without CO₂ supplementation at ambient conditions (~400 ppm).
• Size: 40 inches (101 centimeters).
• Voltage: 120 to 277 volts.

The Fluence SPYDR 2x is an early-development, top-lighting solution for commercial cultivation, or a full-cycle top-lighting solution for home hobbyists cultivating without CO₂ supplementation at ambient conditions around 400 ppm.

• Early-development, top-lighting solution for commercial cultivation.
• Full-cycle top-lighting solution for home hobbyists.
• Designed for use without CO₂ supplementation at ambient conditions (~400 ppm).
• Light output PPF: 705 ™mol/s.
• Efficacy: 2.40 ™mol/J @ 277 AC.
• AC input power: 294 W @ 277 V AC.
• Certifications: UL 8800, UL 1598 Wet Location, DLC.
• Spectrum: PhysioSpec Indoor™.
• Length: 47 inches (1,194 millimeters).
• Width: 42.8 inches (1,087 millimeters).

• Early-development, top-lighting solution for commercial cultivation.
• Full-cycle top-lighting solution for home hobbyists.
• Designed for use without CO₂ supplementation at ambient conditions (~400 ppm).
• Light output PPF: 705 µmol/s.
• Efficacy: 2.40 µmol/J @ 277 AC.
• AC input power: 294 W @ 277 V AC.
• Certifications: UL 8800, UL 1598 Wet Location, DLC.
• Spectrum: PhysioSpec Indoor™.
• Length: 47 inches (1,194 millimeters).
• Width: 42.8 inches (1,087 millimeters).

• Early-development, top-lighting solution for commercial cultivation.
• Full-cycle top-lighting solution for home hobbyists.
• Designed for use without CO₂ supplementation at ambient conditions (~400 ppm).
• Spectrum: PhysioSpec Indoor™.
• Length: 32.5 inches (826 millimeters).
• Lightbar only.

The Fluence SPYDR 2x is an early-development, top-lighting solution for commercial cultivation, or a full-cycle top-lighting solution for home hobbyists cultivating without CO₂ supplementation at ambient conditions around 400 ppm.

The Fluence SPYDR 2x is an early-development, top-lighting solution for commercial cultivation, or a full-cycle top-lighting solution for home hobbyists cultivating without CO₂ supplementation at ambient conditions around 400 ppm. It's a bright and flexible rack lighting solution that maximizes the grow space for higher crop yields and better quality.

• Designed for full-cycle, close-proximity cultivation in controlled environments.
• Tailored to multi-tiered vertical applications where even one wasted inch is one too many.
• Spectrum: PhysioSpec™ Indoor.
• Size: 47 inches (119 centimeters).
• Voltage: 347 to 480 V.

• Designed for full-cycle, close-proximity cultivation in controlled environments.
• Tailored to multi-tiered vertical applications where even one wasted inch is one too many.
• Spectrum: PhysioSpec Indoor™.
• Size: 47 inches (119 centimeters).
• Voltage: 120 to 277 V.

• Designed for full-cycle, close-proximity cultivation in controlled environments.
• Tailored to multi-tiered vertical applications where even one wasted inch is one too many.
• Spectrum: PhysioSpec™ Indoor.
• Size: 47 inches (119 centimeters).
• Lightbar only.

The Fluence SPYDR 2p LED grow light maximizes growth in controlled environments, leaving no space unused. Ideal for full-cycle, multi-tiered vertical applications, it features Fluence's PhysoSpec Indoor™ spectrum, ensuring optimal conditions for plants to thrive.

• High-performance top lighting designed for commercial growers.
• Ideal for those wanting to push high-PPFD cultivation.
• Suitable for experimental applications or treatments.
• Light output PPF: 1,700 µmol/s.
• Efficacy: 2.7 µmol/J @ 277 AC.
• AC input power: 631 W @ 277 V AC.
• Certifications: UL 8800, UL 1598 Wet Location, DLC.
• Spectrum: PhysioSpec Indoor™.
• Size: 47 inches (119 centimeters).
• Voltage: 347 to 480 volts.

• High-performance top lighting designed for commercial growers.
• Ideal for those wanting to push high-PPFD cultivation.
• Suitable for experimental applications or treatments.
• Light output PPF: 1,700 µmol/s.
• Efficacy: 2.7 µmol/J @ 277 AC.
• AC input power: 631 W @ 277 V AC.
• Certifications: UL 8800, UL 1598 Wet Location, DLC.
• Spectrum: PhysioSpec Indoor™.
• Size: 47 inches (119 centimeters).
• Voltage: 120 to 277 volts.

• High-performance top lighting designed for commercial growers.
• Ideal for those wanting to push high-PPFD cultivation.
• Suitable for experimental applications or treatments.
• Size: 47 inches (119 centimeters).
• Light bar only.

• High-performance top lighting designed for commercial growers.
• Ideal for those wanting to push high-PPFD cultivation.
• Suitable for experimental applications or treatments.
• Size: 40 inches (101 centimeters).
• Voltage: 347 to 480 volts.