Gavita

Gavita® Controller Cables attach to Gavita Master controller to the Gavita E-Series ballast. These come in 5, 16 and 25 ft configurations to best fit your specific application.

The Gavita® Master Controller EL3 is the next generation in our EL controller series, designed to maximize the performance of your compatible fixtures. The EL3 enables you to set sunrise/sunset dimming, high-temperature dimming, and high-temperature shut-off for all connected fixtures. Best of all, the EL3 lets you build and program entire schedules for your growing cycles. When using a compatible Gavita or Sun System LED fixture, you will be able to view at the individual fixture level, how each one is performing.

Each Gavita LED Bracket unit includes 2 brackets (sold as a pair).

• Conversion cable for Gavita LED fixtures.
• 3-pin to 5-pin Wieland connections.

The Gavita® Pro 1700e LED is a 1700 µmol s-1 fixtures with an impressive efficiency of 2.7 µmol s-1 per watt. The pro 1700e delivers broad coverage with its 8 passively cooled LED bard. The 8-bar configuration allows you to use it in low rooms, over single benches, or even in 4 x 4 ft or 5 x 5 ft tents. This powerful, full-spectrum light source is intended for full term plant growth from the vegetative stage to the higher light requiring bloom stage. Fixture is dimmable to 50% without any loss of efficiency with the use of the Master Controllers. The Gavita E-Series Led adaptor 120-277V #906151 or 367V #906150 (sold separately) is needed for each fixture when using the controller. This fixture is build with high-quality 120-277 or 347 volt Philips brand drivers. Sun Grip® light hangers are included for handing the fixture. Dimensions 44.1 in x 44.1 in x 2.1 in. 630 watts. The Gavita Pro 1700e fixtures are UL listed, IP66 wet location rated, and FCC compliant.

• Eight-foot (2.4 meter) power cord for Gavita® LED fixtures.
• 208- to 240-volt plug to 5-pin Wieland connection.

• Eight-foot (2.4 meter) power cord for Gavita® LED fixtures.
• 120-volt plug to 5-pin Wieland connection.

The Gavita® Pro 1700e LED is a 1700 µmol s-1 fixtures with an impressive efficiency of 2.7 µmol s-1 per watt. The pro 1700e delivers broad coverage with its 8 passively cooled LED bard. The 8-bar configuration allows you to use it in low rooms, over single benches, or even in 4 x 4 ft or 5 x 5 ft tents. This powerful, full-spectrum light source is intended for full term plant growth from the vegetative stage to the higher light requiring bloom stage. Fixture is dimmable to 50% without any loss of efficiency with the use of the Master Controllers. The Gavita E-Series Led adaptor 120-277V #906151 or 367V #906150 (sold separately) is needed for each fixture when using the controller. This fixture is build with high-quality 120-277 or 347 volt Philips brand drivers. Sun Grip® light hangers are included for handing the fixture. Dimensions 44.1 in x 44.1 in x 2.1 in. 630 watts. The Gavita Pro 1700e fixtures are UL listed, IP66 wet location rated, and FCC compliant.

• Single-ended horticultural fixture.
• Contains two Philips 315 watt 4,200° Kelvin CMH lamps.
• Ideal for vegetative or supplemental use.
• Repeater Bus interface enables external control with the Gavita® Master controllers.
• This compact fixture integrates ballast and reflector.
• Intelligent double-ballast concept: switch off one lamp in the fixture.
• Reflector is designed for CMH only installations:
• Medium 132° beam angle for double CDM 315 fixtures.
• High-grade Miro® aluminum.
• Provides 90%+ uniformity and optimal horizontal crop penetration.

Pair of eyebolts with M6 hex nuts to hang your Gavita® lighting fixtures. Pair of eyebolts, with M6 hex nuts to hang your Gavita lighting fixtures. Includes 2 M6 eye bolts and 3 M6 hex nuts.

Gavita® horticultural High Pressure Sodium (HPS) lamp with high output and extreme long light maintenance. Change once a year for best results. Light maintenance 5,000 hrs: >96%. Color temperature is 2,100° K and the lamp base is K12 x 30s. Suitable for High Frequency Gavita ballasts. The jacket of this double-ended lamp is made from quartz glass. Do not handle with bare hands. Oil from your hands can damage the lamp.

• Three-way splitter.
• 6P6C connection jacks.
• Four-piece kit.

• Optional power cord for 277 volt or higher Gavita® fixtures.
• Can be disconnected by a fixture-side IP68 Wieland RST plug.
• Can be hardwired.
• 3 foot (1 meter) cord.

• Optional power cord for 277 volt or higher Gavita® fixtures.
• Can be disconnected by a fixture-side IP68 Wieland RST plug.
• Can be hardwired.
• 6 foot 6 inch (198 centimeter) cord.

• Optional power cord for 277 volt or higher Gavita® fixtures.
• Can be disconnected by a fixture-side IP68 Wieland RST plug.
• Can be hardwired.
• 10 foot (3 meter) cord.

• Includes the HR96 Reflector for maximum efficiency and uniformity.
• Designed with broad light dispersion in mind.
• Highly efficient passive ballast cooling for longer fixture life.
• Sealed housing with a Gore-Tex® ventilation plug.
• Controllable output up to 1,150 watts.
• Equipped with a dimming knob for manual light output adjustment.
• Features a Repeater Bus interface for control with a Gavita EL Controller (sold separately).
• Connect up to 100 fixtures in a single daisy chain series, up to five daisy chains per EL controller output.
• A single EL controller output can control up to five 100-fixture daisy chains.

• 2 LED Clone Bars per package.
• Perfect replacement for T5 fluorescent light fixture.
• 60% more efficient, running off 18 watts.
• Tested in nursery applications.
• Color temperature: 9,000° K.
• Delivers 35 µmol/s at an efficient 2.0 µmol/j.120° wide light distribution.
• 18W per strip (0.15 amps on 120V).
• Daisy chain up to 100 strips on a 20 amp circuit.
• Two strips in array per shelf.
• Easy installation with hanging clip and zip tie slot.
• IP66 wet rated; fully waterproof with water-resistant housing and connectors.
• Rated for 54,000 hours.
• Standard 5-year warranty.
• Mounting hardware and 120 V power cord included.

• High light intensity to help produce higher yields.
• Broad white light with enhanced blue spectrum which may intensify terpene and cannabinoid profiles.
• Foldable 8-rail fixture is a breeze to ship, store, and install.
• Dimmable down to 10% with the Gavita EL3 Master controller (sold separately).
• Delivers the highest efficiency of any full spectrum, Gavita LED fixture at an impressive 3.2 µmol/J.
• Premium diodes.
• Broad Range driver to accommodate a larger voltage range of 208 to 480 V.
• IP66 wet rating and ANSI/CAN/UL 8800 compliant.
• Assembled in the USA using foreign components.
• Dimensions: 44.1 in x 43.7 in x 3.3 in (112.0 x 111.0 x 8.4 cm).
• Weight: 33.6 pounds (15.24 kilograms).

• Designed as a direct replacement for HID fixtures, with plug-and-play installation for instant LED conversions.
• Wide, even light distribution indiscernible from HPS light throw, with better uniformity.
• Compact design fits most HPS layouts, reducing the pain when replacing hundreds at a time.
• Broad white light with enhanced blue spectrum which may intensify terpene and cannabinoid profiles.
• Dimmable down to 35% with the Gavita EL3 Master controller (sold separately).
• Delivers 2000 µmol s-1 PAR and an efficient 3.0 µmol/j.
• Premium diodes and drivers.
• Broad Range driver to accommodate a larger voltage range of 208 - 480 V.
• IP65 wet rating and ANSI/CAN/UL 8800 compliant.
• Assembled in the USA using foreign components.
• Weight: 34.5 pounds (15.65 kilograms).

• Gavita E-series Interconnect Cables supply controller signals from one ballast to additional ballasts.
• Designed for daisy chain setups with Gavita Master Controllers.
• Available in 2, 5, 8, and 10-foot configurations to suit specific applications.

The Gavita® RS 1900e produces 1900 µmol s-1 PAR and an impressively efficient 3.0 µmol/j and delivers a broad white light with an enhanced blue spectrum, which some studies show may intensify secondary metabolites, such as terpenes and cannabinoids. This powerful, full-spectrum light source is intended for full-term plant growth - from the vegetative stages to higher-light-requiring bloom and finishing stages. Using the Gavita Master EL3 Controller (sold separately), the fixture is dimmable to 10%.

• Eight-foot (2.4 meter) power cords for Gavita® LED fixtures.
• Plug or bare-wire to 5-pin Wieland connections.
• 120-volt, 208- to 240-volt, 277- to 400-volt options.

• Designed to maximize the performance of your compatible Gavita® fixtures.
• Simplifies lighting management with under-friendly interfaces.
• Range of models ensures the right fit for equipment needs.
• Latest generation EL3 controller compatible with Titan Controls™ Grow Room Sensors.