Lighting

Create the ideal lighting environment for your greenhouse or growroom with high-performance solutions from trusted brands like Fluence, Gavita, and more. Whether you're looking for LED, HPS, or MH lighting equipment, we provide a comprehensive selection of fixtures, lamps, electrical components, cords, cables, and hangers to meet your needs. Connect with our lighting specialists for personalized support, a complimentary lighting map, and insights into available rebates that can maximize your investment.

View as Grid List
Sort by
Display items per page
Q101258.jpg

Fluence AC Flex 1T Pigtail 5' (1.5 m) Pushlock Male/Female/Female (3 Pin)

Q101258
Q100917.jpg

LightEnerG Pro Light 2 T5 SHO Kit (2 Lamp), 4' x 9" x 3" (122 x 23 x 7.6 cm)

Q100917
  • Extremely efficient low-heat horticultural lighting system.
  • T5 Super High Output (SHO) lighting provides an ideal spectrum for plant growth.
  • Minimal heat output allows placement 6 to 8 in (15.24 to 20.32 cm) above plant canopy.
  • No risk of scorching leaves, unlike MH lighting.
  • Closer placement maximizes photosynthetic response and promotes fuller growth at lower wattage.
  • Includes T5 SHO grow bulbs, built-in ballast, hanging hardware, and 12-foot (3.7-meter) grounded power cord.
  • Two-year rebuild or replace warranty.
  • ETL approved.
  • Dimensions (L x W x H): 4 ft x 9 in x 3 in (122 x 23 x 7.6 cm).
Picture of Fluence DC Wireless Flex Dimming Receiver for Fixture with M12

Fluence DC Wireless Flex Dimming Receiver for Fixture with M12

Q101220

Fluence Wireless Flex Dimming delivers simplicity, flexibility, and cost savings to your grow operation by replacing dimming cables to each light fixture with wireless control. Wireless Flex Dimming realizes tremendous labor costs savings from reduced installation time, eliminating potential wiring errors. Simply plug a Wireless Flex Dimming Receiver into the dimming port of each Fluence light fixture, install a Wireless Flex Dimming 0-10 V adapter, and connect the 0-10 V dimming control per zone.

Wireless Flex Dimming features qualified Bluetooth mesh technology enabled by SILVAIR that is fully compatible with any 0-10 V dimmer or environmental controllers. Wireless Flex Dimming is easy to configure and enables HPS to LED retrofit growers to add precise dimming control without installing new wiring, maximizing ROI.

Picture of Fluence DC Wireless Flex Dimming Receiver for Fixture with M16

Fluence DC Wireless Flex Dimming Receiver for Fixture with M16

Q101221

Fluence Wireless Flex Dimming delivers simplicity, flexibility, and cost savings to your grow operation by replacing dimming cables to each light fixture with wireless control. Wireless Flex Dimming realizes tremendous labor costs savings from reduced installation time, eliminating potential wiring errors. Simply plug a Wireless Flex Dimming Receiver into the dimming port of each Fluence light fixture, install a Wireless Flex Dimming 0-10 V adapter, and connect the 0-10 V dimming control per zone.

Wireless Flex Dimming features qualified Bluetooth mesh technology enabled by SILVAIR that is fully compatible with any 0-10 V dimmer or environmental controllers. Wireless Flex Dimming is easy to configure and enables HPS to LED retrofit growers to add precise dimming control without installing new wiring, maximizing ROI.

Picture of Fluence RAZR Modular Fixture Frame Kit, 8 in Bar Spacing, 2 ft

Fluence RAZR Modular Fixture Frame Kit, 8 in Bar Spacing, 2 ft

Q113897

A specialized frame kit designed for Fluence RAZR series LED horticulture fixtures.

Picture of Fluence RAZR Modular Fixture Frame Kit, 6 in Bar Spacing, 2 ft

Fluence RAZR Modular Fixture Frame Kit, 6 in Bar Spacing, 2 ft

Q113772
Q112925.jpg

Ultra Sun MH 1000 W DE 6,000 K Lamp

Q112925
Q112926.jpg

Ultra Sun MH 1000 W DE 10,000 K Lamp

Q112926
Picture of Fluence DC Splitter Cables
Picture of Fluence SPYDR RMA Kit Hinge

Fluence SPYDR RMA Kit Hinge

Q101685
Q100922.jpg

LightEnerG Pro Light 2 T5 SHO Kit Mini (2 Lamp), 2' x 9" x 3" (60 x 23 x 7.6 cm)

Q100922
  • Extremely efficient low-heat horticultural lighting system.
  • T5 Super High Output (SHO) lighting provides an ideal spectrum for plant growth.
  • Minimal heat output allows placement 6 to 8 in (15.24 to 20.32 cm) above plant canopy.
  • No risk of scorching leaves, unlike MH lighting.
  • Closer placement maximizes photosynthetic response and promotes fuller growth at lower wattage.
  • Includes T5 SHO grow bulbs, built-in ballast, hanging hardware, and 12-foot (3.7-meter) grounded power cord.
  • Two-year rebuild or replace warranty.
  • ETL approved.
  • Dimensions (L x W x H): 2 ft x 9 in x 3 in (60 x 23 x 7.6 cm).
Picture of Fluence RAZR Modular 8-Bar Rack Fixture Frame, 4' with 6" Spacing (1 Kit)

Fluence RAZR Modular 8-Bar Rack Fixture Frame, 4' with 6" Spacing (1 Kit)

Q101091

Frame accessory for Fluence RAZR Modular rack fixtures with 6" (15 cm) light bar spacing.

Q101032.jpg

LightEnerG Adjusta Shade Reflector (1,000 W)

Q101032
  • Increases growing area under each lamp to maximize yields.
  • Adjustable settings allows it to be positioned close to plants for greater area coverage.
  • Simulates seasonal conditions indoors.
  • Manufactured using high-end materials for efficient light and heat transfer.
  • Accommodates all mogul based HID bulbs.
  • Pre-wired with 15-ft (4.6 m) lamp cord and mogul socket.
  • Wattage: 1,000 W.
Q101234.jpg

Fluence AC Cord Twist Lock 15' (4.5 m) Threaded Female (3 Pin)

Q101234
Q112924.jpg

Solis Tek 1,000 W HPS 400 V DE Lamp

Q112924
Q101261.jpg

Fluence AC Flex Trunk Extension Pushlock 15' (4.5 m) Pushlock Male/Female (3 Pin)

Q101261
Picture of Fluence RAZR Modular 6-Bar Rack Fixture Frame, 4' with 8" Spacing (1 Kit)

Fluence RAZR Modular 6-Bar Rack Fixture Frame, 4' with 8" Spacing (1 Kit)

Q101096

Frame accessory for Fluence RAZR Modular rack fixtures with 8" (20 cm) light bar spacing.

Q100938.jpg

LightEnerG Bare HPS Ballast (1,000 W)

Q100938
  • UL certified ballast unit.
  • North American made capacitor.
  • Quad-tap (120 V, 208 V, 240 V, and 277 V).
  • Must be assembled by a qualified electrician.
  • Only for use with HPS bulbs.
Q112887.jpg

SunBlaster T5 HO Combo w/ Nanotech Reflector 48" / 54W

Q112887

Combines two of SunBlaster™'s best products into a single convenient package: the T5HO Light Kit and NanoTech T5 Reflector.

Kit includes:

  • T5HO Strip Light
  • NanoTech Reflector
  • 6-foot (1.8 m) power cord with on/off switch.
  • 14-inch (35.56 centimeter) link cord.
  • Two (2) flush-mount clips.
  • Two (2) hanging clips.

Specifications:

  • Light Output: 3,730 Lumens
  • Power Consumption: 54 Watts
  • Rated Life: 10,000 Hours
  • Nominal Length: 46 inches (1,173 millimeters).
  • Nominal Width: 1.8 inches (46 millimeters).
  • Nominal Height: 1.4 (36 millimeters).
  • Colour Temp: 6,400° Kelvin
  • Lighting Angle: 103°
  • Voltage: 110-130 Volts
  • Length: 48 inches (120 centimeters).
Picture of Fluence AC Cord Twist Lock 15' (4.5 m) Pushlock Female (3 Pin)

Fluence AC Cord Twist Lock 15' (4.5 m) Pushlock Female (3 Pin)

Q101253
Q101002.jpg

LightEnerG Ceramic Super MH Bulb (315 W / 930 / 624)

Q101002
  • Designed to outperform standard MH lamps.
  • Creates higher amounts of UV and infrared rays for stronger and woodier stalks.
  • Higher red spectrum for flowering efficiency.
  • Higher PAR efficiency than MH or HPS lamps.
  • Superior lamp to color consistency.
  • High initial and maintained lumens.
  • Dependable long life (15,000+ hours).
  • Universal Burning Position.
  • High efficacy / low operating cost.
  • Can work with both normal- and pin-operated sockets.
  • Environmentally friendly.
  • High color rendering index (CRI): 90+ out of 100.
  • Lower heat output watt-per-watt.
  • 3,100 K.
  • 624 µmol.
Q101003.jpg

LightEnerG Ceramic Super MH Bulb (315 W / 942 / 588)

Q101003
  • Designed to outperform standard MH lamps.
  • Emits a blue light spectrum ideal for the vegetative stage of growth.
  • Added red spectrum for flowering efficiency.
  • Higher PAR efficiency than MH or HPS lamps.
  • Superior lamp to colour consistency.
  • High initial and maintained lumens.
  • Dependable long life (15,000+ hours).
  • Universal Burning Position.
  • High efficacy/ low operating cost.
  • Can work with both normal- and pin-operated sockets.
  • Environmentally friendly.
  • High color rendering index (CRI): 90+ out of 100.
  • Lower heat output watt-per-watt.
  • 4,000 K.
  • 588 µmol.
Q113172.jpg

Super Sprouter® T5 High Output Grow Light Fixture

P_00660
  • Integrated electronic ballast.
  • 6,400-degree K lamp included.
  • Comes with power cord, jumper cord, and mounting clips (for hanging and flat surfaces).
  • Daisy chain up to eight lights per single power cord.
  • Reflector utilizes nanotechnology for enhanced reflection.
  • 18-inch fixture designed for Super Sprouter Light Track Domes.
Q113172.jpg

Super Sprouter T5 HO 18 in Grow Light Blister Pack (6/Cs)

Q113172
Super Sprouter® now offers the 18 in T5 High Output Grow Light fixture with the nano-tech reflector. This fixture includes an integrated electronic ballast, 6400° K lamp, power cord, jumper cord and mounting clips (hanging and flat surface). You can daisy chain up to 8 lights per single power cord. The reflector uses nanotechnology to maximize reflection. The 18 in fixture is designed specifically to fit Super Sprouter® Light Track Domes.
Refine
×