Lighting

The Fluence SPYDR 2x is an early-development, top-lighting solution for commercial cultivation, or a full-cycle top-lighting solution for home hobbyists cultivating without CO₂ supplementation at ambient conditions around 400 ppm.

The Fluence SPYDR 2x is an early-development, top-lighting solution for commercial cultivation, or a full-cycle top-lighting solution for home hobbyists cultivating without CO₂ supplementation at ambient conditions around 400 ppm.

• Designed to be used with Gavita® 1700e LED fixtures.
• Allows users to control fixtures with a Gavita EL series controller.
• Utilizes cables with RJ45 connectors for daisy chaining the control signal between adapters.
• Adapters are cETLus listed and IP66 rated for commercial use.
• Additional RJ45 to RJ45 cables available.
• Use RJ45 to RJ9 cable for connection to the Gavita Master Controller EL1 or EL2.
• Use three-way splitter for branching signal into dual paths.

The Gavita® Pro 1700e LED is a 1700 µmol s-1 fixtures with an impressive efficiency of 2.7 µmol s-1 per watt. The pro 1700e delivers broad coverage with its 8 passively cooled LED bard. The 8-bar configuration allows you to use it in low rooms, over single benches, or even in 4 x 4 ft or 5 x 5 ft tents. This powerful, full-spectrum light source is intended for full term plant growth from the vegetative stage to the higher light requiring bloom stage. Fixture is dimmable to 50% without any loss of efficiency with the use of the Master Controllers. The Gavita E-Series Led adaptor 120-277V #906151 or 367V #906150 (sold separately) is needed for each fixture when using the controller. This fixture is build with high-quality 120-277 or 347 volt Philips brand drivers. Sun Grip® light hangers are included for handing the fixture. Dimensions 44.1 in x 44.1 in x 2.1 in. 630 watts. The Gavita Pro 1700e fixtures are UL listed, IP66 wet location rated, and FCC compliant.

• Connects Gavita LED fixtures together.
• 10-foot (3-meter) RJ45-to-RJ45 signal cable.

• Connects Gavita® EL1 or EL2 controllers to the first Gavita LED fixture.
• 25-foot (7.5-meter) RJ45-to-RJ9 signal cable.

• Designed to be used with Gavita 1700e LED fixtures.
• Branches the signal into dual output paths.
• For cables with RJ45 connectors.

Gavita® horticultural High Pressure Sodium (HPS) lamp with high output and extreme long light maintenance. Change once a year for best results. Light maintenance 5,000 hrs: >96%. Color temperature is 2,100° K and the lamp base is K12 x 30s. Suitable for High Frequency Gavita ballasts. The jacket of this double-ended lamp is made from quartz glass. Do not handle with bare hands. Oil from your hands can damage the lamp.

Replacement reflector for the Gavita® Pro line and HortiStar requires no tools to install. The medium spread of this reflector with 100° beam angle is great for tents and small rooms. This is Gavita’s most suitable reflector for single-light set ups. The 100° is designed for uniformity and deep crop penetration in 1-2 fixture configurations. Suitable for double-ended 750-1,000W HPS.

• Eight-foot (2.4 meter) power cords for Gavita® LED fixtures.
• Plug or bare-wire to 5-pin Wieland connections.
• 120-volt, 208- to 240-volt, 277- to 400-volt options.

• Eight-foot (2.4 meter) power cord for Gavita® LED fixtures.
• 277- to 400-volt bare wire to 5-pin Wieland connection.

• Eight-foot (2.4 meter) power cord for Gavita® LED fixtures.
• 120-volt plug to 5-pin Wieland connection.

• Eight-foot (2.4 meter) power cord for Gavita® LED fixtures.
• 208- to 240-volt plug to 5-pin Wieland connection.

Gavita® Controller Cables attach to Gavita Master controller to the Gavita E-Series ballast. These come in 5, 16 and 25 ft configurations to best fit your specific application.

Lighting control at your fingertips! The Master controller EL 1 and EL2 Gen 2 are Gavita®'s entry-level systems for centrally controlling large rooms with e-series fixtures. The second generation of Master controllers features improved and expanded functionality that raises the bar including non-volatile memory, event logging, independent sunrise and sunset setting and independent light cycles on the EL2. The EL 1 has one lighting control channel and the EL2 has two lighting control channels. The EL 1 can control 500 max repeater bus fixtures and 40 max single bus fixtures without a booster. The EL2 can control 1000 max repeater bus fixtures and 80 max single bus fixtures without a booster.

The Gavita® E-series Interconnect Cables are used to supply controller signal from ballast to additional ballasts (daisy chain) for use with the Gavita Master Controllers. They come in 2-, 5-, 8-, and 10-foot (61-centimeter, 1.5-, 2.4-, and 3-meter) configurations to best fit your specific application.

Lighting control at your fingertips! The Master controller EL 1 and EL2 Gen 2 are Gavita®'s entry-level systems for centrally controlling large rooms with e-series fixtures. The second generation of Master controllers features improved and expanded functionality that raises the bar including non-volatile memory, event logging, independent sunrise and sunset setting and independent light cycles on the EL2. The EL 1 has one lighting control channel and the EL2 has two lighting control channels. The EL 1 can control 500 max repeater bus fixtures and 40 max single bus fixtures without a booster. The EL2 can control 1000 max repeater bus fixtures and 80 max single bus fixtures without a booster.

The Gavita® Master Controller EL3 is the next generation in our EL controller series, designed to maximize the performance of your compatible fixtures. The EL3 enables you to set sunrise/sunset dimming, high-temperature dimming, and high-temperature shut-off for all connected fixtures. Best of all, the EL3 lets you build and program entire schedules for your growing cycles. When using a compatible Gavita or Sun System LED fixture, you will be able to view at the individual fixture level, how each one is performing.