Lighting

• Optimized for full-cycle leafy green, basil, strawberry and culinary herb production.
• Early-stage vegetative growth for vegetables, ornamentals, and other cultivars.
• Features a sleek form-factor, broad-spectrum light, and world-class energy efficiency.
• An average PPFD up to 375 µmol/m2/s over a 2' x 4' (61 x 122 cm) area with a 5” (12.7 cm) mounting height above canopy.
• Includes 5 lighting modules and covers 40 square feet (3.7 square meters) of canopy.
• Allows mounting as close as five inches (12.7 centimeters) from the plant canopy.
• Enables quick and easy deployment with a one-to-many design connecting up to ten modules to one power supply.
• Designed for a wide range of vertical farming applications.

• Supports full-cycle cultivation of leafy greens and microgreens.
• Features a sleek form-factor, broad-spectrum light, and world-class energy efficiency.
• An average PPFD up to 260 µmol/m2/s over a 2' x 4' (61 x 122 cm) area with an 8" (20 cm) mounting height above canopy.
• Includes seven lighting modules and covers 56 square feet (5.2 square meters) of canopy.
• Allows mounting as close as five inches (12.7 centimeters) from the plant canopy.
• Enables quick and easy deployment with a one-to-many design connecting up to ten modules to one power supply.
• Designed for a wide range of vertical farming applications.

• Optimized for young plant propagation of vegetable and ornamental crops.
• Ideal for tissue culture, seedlings, and cutting/cloning propagation.
• Features a sleek form-factor, broad-spectrum light, and world-class energy efficiency.
• An average PPFD up to 160 µmol/m2/s over a 2' x 4' (61 x 122 cm) area with a 12" (30 cm) mounting height above canopy.
• Includes 10 lighting modules and covers 80 square feet (7.43 square meters) of canopy.
• Allows mounting as close as five inches (12.7 centimeters) from the plant canopy.
• Enables quick and easy deployment with a one-to-many design connecting up to ten modules to one power supply.
• Designed for a wide range of vertical farming applications.

• Available in 6 spectral options in a 66” (1,676 mm) slim form factor for tight grow environments.
• The longest RAY Series family member is ideal for a variety of applications.
• Physiospec™ Spectrum: Greenhouse, Indoor, Antho, UV, Pr, and Pfr.
• Certifications: cETL & UL 1598 Damp Location.

• Available in 6 spectral options in a 44” (1,118 mm) slim form factor for tight grow environments.
• Perfect for side canopy lighting over a 4-foot area.
• Physiospec™ Spectrum: Greenhouse, Indoor, Antho, UV, Pr, and Pfr.
• Certifications: cETL & UL 1598 Damp Location.

• Available in 6 spectral options in a 22” (559 mm) slim form factor for tight grow environments.
• Well-suited for research, vertical farms, side-canopy, and intra-canopy use.
• PhysioSpec™ Spectrums: Indoor, Greenhouse, Antho, UV, Pr, and Pfr.
• Certifications: cETL & UL 1598 Damp Location.

Frame accessory for Fluence RAZR Modular rack fixtures with 6 inch (15 centimeter) or 8 inch (20 centimeter) light bar spacing.

• Designed to be used with LightEnerG Pro Light T5 HO Kits.
• Cost-efficient bulbs ideal for starting plants from seeds or cuttings.
• Can be used to add extra light during the fruiting and flowering stage.

• Extremely efficient low-heat horticultural lighting systems.
• T5 Super High Output (SHO) lighting provides an ideal spectrum for plant growth.
• Minimal heat output allows placement 6 to 8 in (15.24 to 20.32 cm) above plant canopy.
• No risk of scorching leaves, unlike MH lighting.
• Closer placement maximizes photosynthetic response and promotes fuller growth at lower wattage.
• Includes T5 SHO grow bulbs, built-in ballast, hanging hardware, and 12-foot (3.7-meter) grounded power cord.
• Two-year rebuild or replace warranty.
• ETL approved.
• Available in a variety of sizes.

LightEnerG™ Light Wing Reflectors are made from German aluminum for 95% reflectivity. Customize these reflectors by bending the aluminum to create the desired lighting for your plants. They’re ultra lightweight and come pre-wired with a Leviton socket, hangers and 15' 16/3 600v lamp cord that is ready to plug into your LightEnerG™ Ballast. Light Wing Reflectors can accommodate most bulbs (not included) and can be purchased in white.

LightEnerG™ Light Tube 1 Air Cooled Reflectors are ETL approved and designed with the best air circulation and light reflectivity available. The interior reflective surface features a specially angled shape with highly reflective German specular aluminum, while the powder coated white enamel exterior protects it from the elements. On top of this, their light tubes provide the most unobstructed air flow in any standard air cooled reflector, allowing you to position your lamps closer to your pl

The LightEnerG™ Cone Reflector comes in either a chrome or white finish for maximum light reflection. The cone shape provides broad light diffusion and it comes with 4 pieces that make the base, a bracket to hold a mogul socket and screws. It’s light weight, easy to assemble and can accommodate all bulbs (not included). Mogul socket and power cord sold separately.

• Designed to outperform standard MH bulbs.
• Light spectrum shifted toward blue make them ideal for the vegetative stage.
• Added red spectrum for flowering efficiency.
• Can be used in the horizontal and vertical position with the appropriate MH ballast.

• Designed to outperform standard HPS lamps.
• Light spectrum shifted towards the red make them ideal during the flowering stage.
• Added blue spectrum for vegetative growth efficiency.
• Provide more energy which is essential for optimized photosynthetic response.
• Lamps can be used in both the horizontal and vertical position with the appropriate HPS ballast.

• Can easily switch between MH and HPS bulbs by flipping a specialized switch.
• Also switchable between 120 V and 240 V.
• Use provided 120 V cord or 240 V cord (sold separately).
• No additional wiring is necessary.
• The aluminum housing dissipates heat and keeps components cool.
• Includes a top-of-the-line Aerovox® capacitor.
• Lamp cord receptacle accepts all LightEnerG lamp cords and reflectors.

• Comes with a universal position mogul socket.
• Mounted to an engineered and modified powder-coated octagonal wire box with a hanger.
• Lamp cord includes a LightEnerG Wire Strain Relief for added durability.
• Plug the male end into a LightEnerG ballast and add the appropriate lamp and reflector.

• Magnetic ballast capable of switching between 120 V and 240 V.
• Use either the 120v or a 240v power cord (sold separately) to change the voltage of the ballast.
• No additional wiring is necessary.
• Can also be used with 600 W MH conversion lamps.
• Aluminum housing is specially designed to dissipate heat and keep components cool.
• Includes a top-of-the-line Aerovox® capacitor.
• Lamp cord receptacle accepts all LightEnerG lamp cords and reflectors.

• Premium 600 V, 1500 W, 5KV-pulse-rated porcelain mogul base sockets.
• Accommodate all mogul base bulbs in a universal position.
• Mogul cap and washer are included.
• Available with leads or without leads.

• Used between a ballast and a mogul socket or reflector.
• Plug the male end into the ballast.
• Hard-wire the bare wire end to the mogul socket or reflector.
• Voltage: 600 V.
• Available in a range of sizes.

• Used between a ballast and a mogul socket or reflector.
• Plug the male end into the ballast.
• Hard-wire the bare wire end to the mogul socket or reflector.
• Voltage: 300 V.
• Available in a range of sizes.

• Feature both male and female ends.
• Connects a ballast and male power cord attached to a socket.

• Used with HID ballasts and capacitors to start HPS bulbs.
• Engineered for long life and high temperature operation.