Greenhouse Lighting

The PowerVEG 660 is a true flowering lamp for indoor gardeners. The PowerVEG 660 produces a red light spectrum that enhances the flowering stage for plants and is essential for triggering fruiting and flowering.

Pro Light T5 HO Bulbs are designed to be used with the Pro Light T5 HO Kit. They’re ideal for starting plants from seeds or cuttings and can also be used to add extra light during the fruiting and flowering process at a minimal cost.

The LightEnerG™ Premium Switchable Quad Tap Ballast is a UL approved magnetic ballast that’s capable of switching between Metal Halide (MH) and High Pressure Sodium (HPS) bulbs, and can be switched between four primary input voltages: 120v, 208v, 240v or 277v. Changing between MH and HPS bulbs can be done by simply powering down the ballast and flipping the specialized switch.Use either the 1

The LightEnerG™ Premium Ballast is a magnetic ballast that’s capable of switching between 120v and 240v. Use either the 120v or a 240v power cord (available separately) to change the voltage of the ballast. No additional wiring is necessary. The LightEnerG™ Premium Ballast can also be used with 600w Metal Halide conversion lamps. The aluminum housing is specially designed to dissipate heat and keep components cool, and a top of the line Aerovox capacitor is also included. The lamp cord rec

LightEnerG™ 1000W High Pressure Sodium (HPS) ballast includes the UL certified ballast unit, and a North American made capacitor. All ballasts are quad-tap (120V, 208V, 240V, and 277V) and must be assembled by a qualified electrician. Only for use with HPS bulbs.

The ACE™ Dimmable Digital HID Ballast is a state of the art, UL approved electronic ballast that can be used with both Metal Halide (MH) or High Pressure Sodium (HPS) bulbs. It features a dimmable switch with the ability to adjust watt output for 3 different settings and comes with both 120v and 240v power cords.The ACE™ also has carefully arranged circuit boards and stainless steel ball bearing fans that allow it to run 15% cooler than standard ballasts to ensure a

LightEnerG™ Mogul Sockets are premium 600V, 1500W, 5KV pulse rated porcelain mogul base sockets which will accommodate all mogul base bulbs in a universal position. Mogul cap and washer included. Available with or without leads.

LightEnerG™ Male Power Cords with Bare Wire Ends are used between a ballast and a power outlet. Plug the male end into the power outlet and hard wire the bare wire end to the ballast.

LightEnerG™ Ballast Power Cords have male and female ends and are available with standard 120 or 240 volt plugs. The high quality LightEnerG™ plugs securely connect to any ballast.

LightEnerG™ 120V Female Power Cords with Bare Wire Ends are versatile cords that can be used for a variety of applications. They come in a number of different sizes and volts to suit your needs.

LightEnerG™ Male Lamp Cords with Bare Wire Ends are used between a ballast and a mogul socket or reflector. Plug the male end into the ballast and hard-wire the bare wire end to the mogul socket or reflector of your choice.

LightEnerG™ Male Lamp Cords with Bare Wire Ends are used between a ballast and a mogul socket or reflector. Plug the male end into the ballast and hard-wire the bare wire end to the mogul socket or reflector of your choice.

The MQ-500 quantum meter is the tool of choice for scientists all over the world to accurately measure photosynthetically active radiation from all light sources. It has a hand-held meter, attached via cable, that displays and stores measurements. The sensor incorporates a blue-enhanced silicon photodiode and custom optical filters with a rugged, self-cleaning sensor housing design, anodized aluminum body with acrylic diffuser. Typical applications include PPFD measurement over plant canopies

LightEnerG™ Lamp Cord Extensions have both male and female ends and are used between a ballast and a male lamp cord to increase the distance from the ballast to the reflector.

LightEnerG™ Female Lamp Cords with Bare Wire Ends are used between a ballast and a male lamp cord and can turn any ballast into a LightEnerG™ compatible ballast. It can also be used to plug into the end of LightEnerG™ fixtures to have a bare wire end.

LightEnerG™ Super High Pressure Sodium Flowering Lamps are designed to outperform standard HPS lamps. They have a light spectrum shifted towards the red making them ideal during the flowering stage of growth with added blue spectrum for vegetative growth efficiency. Light EnerG™ Super HPS lamps provide more energy which is essential for optimized photosynthetic response. Lamps can be used in both the horizontal and vertical position with the appropriate HPS ballast.

Full spectrum Ceramic Metal Halide Lamp optimized for flowering stage of growth.3100K575 µmolBetter PAR efficiency than MH orHPS lampsSuperior lamp to colourconsistencyHigher red spectral ratioenhancing flowering & g

LightEnerG™ Capacitors are used with HID Ballasts to store energy. They’re made in North America for long life and high temperature operation.

LightEnerG™ Long Range Ignitors are used with HID Ballasts and Capacitors to start High Pressure Sodium bulbs. They’re made for long life and high temperature operation.

LightEnerG™ Flipper allows an individual ballast to run two separate lights - one at a time - by switching back and forth between each light, at a user-specified interval. Can be controlled by your own timer.

LightEnerG™ Brackets are a proprietary design to be used with the LightEnerG™ Premium and LightEnerG™ Econo Cord and Socket Set, providing mounting and support for the bulb and shade assembly.

The LightEnerG™ Cone Reflector comes in either a chrome or white finish for maximum light reflection. The cone shape provides broad light diffusion and it comes with 4 pieces that make the base, a bracket to hold a mogul socket and screws. It’s light weight, easy to assemble and can accommodate all bulbs (not included). Mogul socket and power cord sold separately.

LightEnerG™ Light Wing Reflectors are made from German aluminum for 95% reflectivity. Customize these reflectors by bending the aluminum to create the desired lighting for your plants. They’re ultra lightweight and come pre-wired with a Leviton socket, hangers and 15' 16/3 600v lamp cord that is ready to plug into your LightEnerG™ Ballast. Light Wing Reflectors can accommodate most bulbs (not included) and can be purchased in white.

The LightEnerG™ Adjusta Shade Reflector is designed to increase the growing area under each lamp and maximize yields. It’s manufactured using high end materials for efficient light and heat transfer and can be adjusted to wider settings, allowing it to be positioned incredibly close to plants for greater area coverage. The adjustable feature also gives you the ability to create seasonal conditions indoors to help activate a plant's natural hormone cycles for improved growth. The Adjusta