Keep your systems running smoothly season after season with water and aeration solutions designed to support healthy plant growth and efficient irrigation. From high-performance water pumps and irrigation supplies to advanced chillers, heaters, and purification systems, we offer the equipment you need to maintain an optimal environment. Our water treatment and aeration products ensure plants receive vital oxygen and nutrients, while pH, EC, and TDS supplies deliver precise monitoring and perfect balance.
The Evolution RO1000â„¢ KDF/Catalytic Carbon pre-filter is the standard carbon pre-filter included with system. For chlorine and chloramines reduction for city water. Also for well water for iron hydrogen sulfide and heavy metals reduction. The Evolution RO1000â„¢ Membrane Element is the standard membrane included with system. 2 needed for system.
Hydro-Logic® Chlorashield membranes remove 100% of chloramine and are great for city water. Rated at 1 GPM down to 1 micron. They are made in the USA and have a low pressure drop combined with exceptionally high dirt holding capacity. HGC728772 is for Evolution-RO systems (20 in x 2.5 in) and should be replaced after 2 500 gallons. HGC741668 is for TallBoy systems (20 in x 2.75 in) and should be replaced after 6 000 gallons. HGC741640 is for PreEvolution systems (10 in x 4.5 in) and should be replaced after 7 500 gallons. HGC741700 is for smallBoy/Stealth-RO systems (9.75 in x 2.75 in) and should be replaced after 1 500 gallons when used with Stealth-RO systems and 3 000 gallons when used in smallBoy systems.
Highly reliable self-priming jet pumps with excellent suction capability that allows the free passage of air bubbles, which can be used for supplying water for domestic and irrigation applications. Built with anti-corrosive and rust-proof materials. Motors with thermic overload protection. Wear-resistant shafts and impellers. Double sealing system between motor and hydraulic part. High resistance to frost and icing. Manual on/off switch.
Computerized control system for surface and submersible pumps. Designed to allow the automatic operation of the pump and prevent it from dry-running. Suitable for pumps with power up to 1500 watts, flow rate up to 32 GPM, operating pressure more than 26 psi and maximum pressure range between 51 psi and 116 psi. Easy to install as it is supplied with power cable with plug and cable with socket for the connection to the pump.
Removes 98%+ of all contaminants in your tap water. Leading the industry in efficiency, the Stealth has a 2:1 waste to product water ratio. Optional 1:1 ratio flow restrictor saves 50% more waste water. Customized for gardening and hydroponics. The Stealth ROâ„¢ 300 produces 300 GPD of ultra pure water. Includes: 3-stage RO unit, 2 RO membranes, carbon filter, cleanable sediment filter, automatic shut-off cartridge, wall mountable metal bracket, garden hose connector, inline shut-off, 8 ft RO and drain line, 5 ft inlet line, filter wrench and instructions. Membrane Power Flush Kit now included.
Unit size: 18.5 in x 16 in x 6 in and weight: 12.5 Ib.
Green Coconut Carbon Filters are the carbon block pre-filter that will reduce chlorine, organic chemicals, mercury, lead, PBCs, sulfur and heavy metals. #741604 is 20 in x 4.5 in. #728845 is 20 in x 2.5 in. #741646 is 10 in x 2.5 in. #741656 is 20 in x 2.75 in.
General Hydroponics® pH Up solution is formulated using potassium hydroxide and potassium carbonate. Add a little at a time when your nutrient pH is too low in order to raise the pH to the proper level.
Flexogen Hose, manufactured by Gilmour with its patented 8-ply construction, double tire cord reinforcement and over 500 PSI burst strength, is strong enough to hold the highest pressure on the hottest days. It is also lightweight and coils easily. The Flexogen Hose also has maximum kink resistance and a polished surface to resist abrasions, stains and mildew.
Hydro Flow® single grip hose clamps provide a superior seal on hose or tubing. As interlocking teeth are pushed together the sealing diameter closes evenly creating a uniform clamping surface. These clamps can be removed by separating the clamping halves in a perpendicular direction at the seal. The black nylon clamps won't corrode or rust and installation and removal requires no tools.
Use these high quality barbed connectors for your irrigation systems or hydroponic systems. Feature barbs for a tight fit. Bump stop assures fittings are completely and securely inserted in tubing.