Search
Canadian Dollar
All Categories
    Menu Close

    Water & Aeration

    Keep your systems running smoothly season after season with water and aeration solutions designed to support healthy plant growth and efficient irrigation. From high-performance water pumps and irrigation supplies to advanced chillers, heaters, and purification systems, we offer the equipment you need to maintain an optimal environment. Our water treatment and aeration products ensure plants receive vital oxygen and nutrients, while pH, EC, and TDS supplies deliver precise monitoring and perfect balance.

    View as Grid List
    Sort by
    Display items per page
    Q102337.jpg

    Hydro-Logic Pressure Booster Pump

    P_00264
    This pump is designed to be installed before the Stealth RO to boost the inlet pressure. Wells and low pressure (below 40 PSI) water sources can benefit greatly from this pump. It boosts the pressure significantly allowing the Stealth RO to run with higher flow and more efficiency while having better TDS removal. The pump is designed for long service life and runs very quietly. Comes with a high pressure switch and operates at 110V.
    Q102406.jpg

    Hydro-Logic® Big Boy™

    P_00255

    Big Boy™ extra high capacity dechlorinator and sediment filter. High flow rate of 7 gallons per minute or 420 gallons per hour. It has a 25,000 gallon capacity. Removes 99% of chlorine and 95%+ of sediment, rust, silt, etc. Includes: 2-stage oversized housings with pleated, cleanable sediment, and carbon block filters, inlet and outlet pressure gauges, heavy-duty wall-mountable aluminum bracket—NO RUST, 1 in inlet and outlet, filter wrench and instructions.

    Unit size 29.5 in x 16 in x 8.5 in and weight is 30 lb.

    Q102429.jpg

    Hydro-Logic® Chlorashield Membranes

    P_00256

    Hydro-Logic® Chlorashield membranes remove 100% of chloramine and are great for city water. Rated at 1 GPM down to 1 micron. They are made in the USA and have a low pressure drop combined with exceptionally high dirt holding capacity. HGC728772 is for Evolution-RO systems (20 in x 2.5 in) and should be replaced after 2,500 gallons. HGC741668 is for TallBoy systems (20 in x 2.75 in) and should be replaced after 6,000 gallons. HGC741640 is for PreEvolution systems (10 in x 4.5 in) and should be replaced after 7,500 gallons. HGC741700 is for smallBoy/Stealth-RO systems (9.75 in x 2.75 in) and should be replaced after 1,500 gallons when used with Stealth-RO systems and 3,000 gallons when used in smallBoy systems.

    Q102454.jpg

    Netafim™ 17 Millimeter Techlock Fittings

    P_00386
    • Barb ends fit securely on UV Polyethylene Tubing (#Q102449)
    • Techlock threaded caps and compression rings ensure a tight seal
    • Operating pressure range: 0 to 100 psi
    Q102457.jpg

    Netafim™ Pressure Compensating (PC) Standard Spray Stakes

    P_00391
    • Provide consistent water distribution across the entire system.
    • Spray pattern angles downward to ensure water lands on the soil, avoiding contact with the pot's wall.
    • Single-sided spray stake is ideal for placement near the edge of the pot.
    • Alternative option includes Netafim's 'bow-tie' double-spray pattern for different watering needs.
    • Pair with the Netafim 36 inch (#Q102480) or 48 in (#Q102479) single spray stake assembly.
    Q102460.jpg

    Netafim™ Self Piercing Pressure Compensating Emitters with Internal Check Valve

    P_00389
    • 1.74 psi internal check valve prevents low emitter drainage, holding back up to a 3.9-foot column of water.
    • Reduces the risk of contaminants being drawn into the emitter.
    • Pressure compensating design ensures consistent flow from 10.15 to 58 psi.
    • Exclusive TurboNet® flow path for regulated flow and continuous self-cleaning action.
    • Sharp barb allows for easy installation with no tools required.
    Q102462.jpg

    Netafim™ Techflow Emitters with Nipple Outlet

    P_00392
    • Unique design regulates flow and provides continuous self-cleaning action.
    • Features a 2.2 PSI internal check valve that prevents low emitter drainage, holding back up to a 5-foot column of water.
    • Anti-siphon operation prevents contaminants from entering the emitter.
    • Pressure compensating, ensuring consistent flow from 14.5 to 58 PSI.
    • Recommended minimum filtration of 120 mesh.
    • Compatible with 36" or 48" 2-way (#Q102463 / #Q102464) or 4-way (#Q112852 / #Q112853) Dripper Stake Assemblies.
    Q102464.jpg

    Netafim™ 2-Way Flat Multi-Outlet Drippers (MOD) with Angle Arrow Drippers

    P_00387
    • Multi-Outlet Dripper (MOD) supports multiple drip stake assemblies from a single drip emitter.
    • Preassembled with a two-way flat manifold, two 36 - or 48-inch UV Polyethylene Tubing leads, and two 6 3/8-inch standard Angle Arrow Drippers.
    • Compatible with the Netafim 1 GPH (Q112854) or 2 GPH (Q102461) Techflow Emitters.
    Q102468.jpg

    Netafim™ 1 Inch Wide Range Pressure Regulators

    P_00384
    • The only 1-inch regulator in the industry rated from 0.5 to 35 GPM.
    • Constructed with high-strength ABS and stainless steel springs for long-lasting durability.
    • Features a rolling diaphragm and sealed regulating chamber for consistent performance.
    • Suitable for various applications in any irrigation system.
    • Operating inlet pressure range: 30 to 150 PSI.
    Q102474.jpg

    Netafim™ Woodpecker Pressure Compensating Junior Drippers

    P_00394
    • Equipped with a barbed outlet and CNL check valve to prevent low emitter drainage.
    • Anti-siphon operation keeps contaminants from entering the emitter.
    • Pressure compensating design ensures consistent flow from 12 - 58 PSI.
    • Compatible with Netafim Super Flex UV White PE Tubing (#Q100705).
    Q102477.jpg

    Netafim™ 3/4 Inch Pressure Regulators

    P_00388
    • Instantly responds to pressure variations to maintain a constant 35 PSI outlet pressure.
    • Non-corrosive, high-quality plastic bodies withstand commonly used fertilizers and chemicals.
    • Sealed regulating unit with a stainless steel spring and screw for easy maintenance and replacement.
    • Maximum Operating Pressure: 145 PSI.
    Q102480.jpg

    Netafim™ Single Spray Stake Assemblies

    P_00390
    • Reduces setup time considerably.
    • Available in 36-inch or 48-inch assemblies for flexible installation.
    • Includes a 3.2 or 6.6 GPH pressure-compensating emitter with CNL check valve.
    • Comes with 36 or 48 inches of Super Flex Tubing.
    • Minimum operating pressure: 22 PSI.
    • 3.2 GPH assemblies pair with Netafim single pattern standard spray stakes (#Q102455).
    • 6.6 GPH assemblies pair with Netafim single pattern (#Q102456) or double pattern (#Q102457) standard spray stakes.
    Q102482.jpg

    Netafim™ 17 Millimeter Fittings

    P_00385
    • Netafim™ 17 mm Shut-Off Valve
      • Dual 17 mm barbed tubing connectors designed for 17 mm UV Poly Tubing (#Q102449).
      • Can be used as a flush valve or to shut off a table.
    • Netafim™ 17 mm Techline Combination Tee
      • Dual 17 mm barbed tubing connectors designed for 17 mm UV Poly Tubing (#Q102449).
      • Connects to 1/2 inch female pipe thread.
      • Use with the Netafim Liquid Filled Pressure Gauge (#Q102475) to measure water pressure on the table.
    Q112811.jpg

    Dosatron® Water Hammer Arrestor Kits

    P_00552

    Dosatron® Water Hammer Arrestor Kits are used to prevent the potential damaging effects of water hammer, which is defined as a pressure surge or shock wave caused when a fluid in motion is forced to stop or change directions suddenly, often due to a quick-closing valve.

    Q100631.jpg

    Rainmaker® Pressurized Pump Sprayers

    P_00549

    All-purpose sprayer ideal for herbicides, pesticides, liquid fertilizers, and many home applications. Funnel top opening makes for easy filling. Trigger with a lock-on option can be engaged for a continuous spraying. Translucent polyethylene for durability and easy viewing of liquid levels. Carry with the grip handle or use the included shoulder strap. Includes a pressure relieve valve and a 3 ft hose. Replacement parts available.

    Q112811.jpg

    Alchemist® H2O2 Liquid Oxygen 34%

    P_00553
    • Contains 34% hydrogen peroxide.
    • Use with caution.
    • Keep away from children.
    • It is unlawful to sell, use, or distribute this product in ways other than as claimed.
    Q102319.jpg

    Hydro-Logic® Membranes

    P_00545

    Replace membranes when product water decreases and/or ppm increase. Merlin Garden Pro and Evolution RO1000 membranes reduce 94%+ of total dissolved solids. Stealth RO100/200, Stealth RO150/300 and microRO-75 membranes reduces 98%+ of total dissolved solids. The Evolution RO1000 and Merlin Garden Pro systems need two (2) membranes. For all membranes, RO output depends on the source water temperature. At 77°, the system should produce 100% of the rated output. As the temperature drops or increases, so does the output.

    Q102331.jpg

    Hydro-Logic Stealth RO 300

    P_00543

    Removes 98%+ of all contaminants in your tap water. Leading the industry in efficiency, the Stealth has a 2:1 waste to product water ratio. Optional 1:1 ratio flow restrictor saves 50% more waste water. Customized for gardening and hydroponics. The Stealth RO™ 300 produces 300 GPD of ultra pure water. Includes: 3-stage RO unit, 2 RO membranes, carbon filter, cleanable sediment filter, automatic shut-off cartridge, wall mountable metal bracket, garden hose connector, inline shut-off, 8 ft RO and drain line, 5 ft inlet line, filter wrench and instructions. Membrane Power Flush Kit now included.

    Unit size: 18.5 in x 16 in x 6 in and weight: 12.5 Ib.

    Q102332.jpg

    Hydro-Logic® Green Coconut Carbon Filters

    P_00546

    Green Coconut Carbon Filters are the carbon block pre-filter that will reduce chlorine, organic chemicals, mercury, lead, PBCs, sulfur and heavy metals. #741604 is 20 in x 4.5 in. #728845 is 20 in x 2.5 in. #741646 is 10 in x 2.5 in. #741656 is 20 in x 2.75 in.

    Q102406.jpg

    Hydro-Logic® Pleated/Cleanable Sediment Filters

    P_00547

    The pleated sediment filters are cleaned by rinsing regularly with a hose. The filters reduces silt, rust, dirt, sand and sediment. Change filters every 6 months. #741654 is 10 in x 2.5 in. #741642 is 10 in x 4.5 in. #741606 is 20 in x 4.5 in.

    Q112557.jpg

    Hydro-Logic® KDF/Catalytic Carbon Filters

    P_00544

    Hydro-Logic® KDF/Catalytic Carbon Upgrade Filters are advanced carbon block pre-filters effective in capturing water-soluble metals, chlorine, chloramines and scale. The carbon media is more porous than coco carbon providing a wider range of filtration.

    Replacement should be performed when inlet pressure and outlet pressure difference is greater than 10%. NOTE: Systems come standard with Hydro-Logic® Green Coconut Carbon Filters but Hydro-Logic® KDF/Catalytic Carbon Filters are an upgrade option.

    Q100629.jpg

    Rainmaker® Battery Powered Sprayer

    P_00649
    • All-purpose sprayer for herbicides, pesticides, and liquid fertilizers.
    • Powered by a rechargeable battery; no manual pumping needed.
    • Equipped with an attached pull cart for easy mobility.
    • Can be worn as a backpack with included padded straps.
    • Ideal for large jobs with a 4 ft hose.
    • Comes with four interchangeable nozzles for various applications.
    • Features a trigger with a lock-on option for continuous spraying.
    • Includes an integrated filter.
    Q113373.jpg

    HydroLogic® Tall Boy™

    P_00617
    • Removes up to 99% of chlorine and 90% of sediment, rust, silt, and volatile organic compounds.
    • Filters particulates down to 5 microns at a flow rate of 2 GPM.
    • Produces 120 gallons per hour of clear water.
    • Filter capacity of 7,500 gallons.
    • Serves as a high-capacity pre-filter for Stealth RO units.
    • Unit dimensions: 12 in x 25.5 in x 6 in.
    • Weight: 12.6 lb.
    Q113016.jpg

    EcoPlus® Commercial Chiller, Electronic Control Unit ETL

    P_00583

    Electronic control unit for EcoPlus® Commercial Chillers.

    Picture of Botanicare® Hydroguard™

    Botanicare® Hydroguard™

    P_00558
    • Botanicare Hydroguard is a bacterial root inoculant.
    • It is designed to decompose organic matter.
    • It may convert organic matter into nutrients.
    • Nutrients can be absorbed directly by plants' roots.
    Refine
    ×