Lighting

• Designed to maximize the performance of your compatible Gavita® fixtures.
• Simplifies lighting management with under-friendly interfaces.
• Range of models ensures the right fit for equipment needs.
• Latest generation EL3 controller compatible with Titan Controls™ Grow Room Sensors.

• Eight-foot (2.4 meter) power cords for Gavita® LED fixtures.
• Plug or bare-wire to 5-pin Wieland connections.
• 120-volt, 208- to 240-volt, 277- to 400-volt options.

• Designed to be used with Gavita® 1700e LED fixtures.
• Allows users to control fixtures with a Gavita EL series controller.
• Utilizes cables with RJ45 connectors for daisy chaining the control signal between adapters.
• Adapters are cETLus listed and IP66 rated for commercial use.
• Additional RJ45 to RJ45 cables available.
• Use RJ45 to RJ9 cable for connection to the Gavita Master Controller EL1 or EL2.
• Use three-way splitter for branching signal into dual paths.

• The Gavita® CT 1930e is the first LED to directly replace HPS.
• Fits seamlessly into existing HPS layouts.
• Highly energy-efficient delivering serious growing power.
• Designed as a 1:1 layout replacement for the Gavita Pro 1000e DE HPS.
• Compatible with wiring and electrical requirements for most indoor growing environments.
• Limits the cost and downtime required to convert facilities of every size.
• Delivers more light in a broader spectrum with up to 20% energy savings compared to Gavita 1000 W DE and single-ended HPS fixtures.*
• Compatible with Gavita EL Master Controllers (sold separately) and most building automation systems.
• Embedded controller technology enables control of up to 2,000 fixtures per EL Master control channel.

*based on average wattage of each fixture.

• Designed to hang various grow equipment such as lights, fans, and filters.
• Easily clip and secure your gear using the heavy-duty carabiner hooks.
• Features a stainless steel locking ratchet to adjust the rope’s length.
• Made of 1/8” braided polypropylene rope and zinc-plated steel hooks.
• Weight capacity: 150 lbs/pair.
• Rope length: 8 ft.

Increase A-grade buds, reduce trim waste, and boost overall crop value with Fluence PYTHN—the purpose-built under-canopy lighting solution.

• Wide 145° distribution provides optimal light uniformity for under-canopy applications.
• Modular installation reduces costs with snap-in connections and flexible configurations.
• Targeted light quality specifically engineered for lower canopy development.
• Efficacy: Up to 3.4 µmol/J.
• IP Rating: IP66-rated, chemical-resistant enclosure.
• Dimming: 0-10V with RJ11 interface.
• Dimensions (LxWxH): 44.88 x 3.23 x 4.13 inches (114 x 8.2 x 10.5 centimeters).

• Designed as a direct replacement for HID fixtures, with plug-and-play installation for instant LED conversions.
• Wide, even light distribution indiscernible from HPS light throw, with better uniformity.
• Compact design fits most HPS layouts, reducing the pain when replacing hundreds at a time.
• Broad white light with enhanced blue spectrum which may intensify terpene and cannabinoid profiles.
• Dimmable down to 35% with the Gavita EL3 Master controller (sold separately).
• Delivers 2000 µmol s-1 PAR and an efficient 3.0 µmol/j.
• Premium diodes and drivers.
• Broad Range driver to accommodate a larger voltage range of 208 - 480 V.
• IP65 wet rating and ANSI/CAN/UL 8800 compliant.
• Assembled in the USA using foreign components.
• Weight: 34.5 pounds (15.65 kilograms).

The Gavita® RS 1900e produces 1900 µmol s-1 PAR and an impressively efficient 3.0 µmol/j and delivers a broad white light with an enhanced blue spectrum, which some studies show may intensify secondary metabolites, such as terpenes and cannabinoids. This powerful, full-spectrum light source is intended for full-term plant growth - from the vegetative stages to higher-light-requiring bloom and finishing stages. Using the Gavita Master EL3 Controller (sold separately), the fixture is dimmable to 10%.

• High light intensity to help produce higher yields.
• Broad white light with enhanced blue spectrum which may intensify terpene and cannabinoid profiles.
• Foldable 8-rail fixture is a breeze to ship, store, and install.
• Dimmable down to 10% with the Gavita EL3 Master controller (sold separately).
• Delivers the highest efficiency of any full spectrum, Gavita LED fixture at an impressive 3.2 µmol/J.
• Premium diodes.
• Broad Range driver to accommodate a larger voltage range of 208 to 480 V.
• IP66 wet rating and ANSI/CAN/UL 8800 compliant.
• Assembled in the USA using foreign components.
• Dimensions: 44.1 in x 43.7 in x 3.3 in (112.0 x 111.0 x 8.4 cm).
• Weight: 33.6 pounds (15.24 kilograms).

• 2 LED Clone Bars per package.
• Perfect replacement for T5 fluorescent light fixture.
• 60% more efficient, running off 18 watts.
• Tested in nursery applications.
• Color temperature: 9,000° K.
• Delivers 35 µmol/s at an efficient 2.0 µmol/j.120° wide light distribution.
• 18W per strip (0.15 amps on 120V).
• Daisy chain up to 100 strips on a 20 amp circuit.
• Two strips in array per shelf.
• Easy installation with hanging clip and zip tie slot.
• IP66 wet rated; fully waterproof with water-resistant housing and connectors.
• Rated for 54,000 hours.
• Standard 5-year warranty.
• Mounting hardware and 120 V power cord included.

• Integrated electronic ballast.
• 6,400-degree K lamp included.
• Comes with power cord, jumper cord, and mounting clips (for hanging and flat surfaces).
• Daisy chain up to eight lights per single power cord.
• Reflector utilizes nanotechnology for enhanced reflection.
• 18-inch fixture designed for Super Sprouter Light Track Domes.

• Gavita E-series Interconnect Cables supply controller signals from one ballast to additional ballasts.
• Designed for daisy chain setups with Gavita Master Controllers.
• Available in 2, 5, 8, and 10-foot configurations to suit specific applications.

• Includes the HR96 Reflector for maximum efficiency and uniformity.
• Designed with broad light dispersion in mind.
• Highly efficient passive ballast cooling for longer fixture life.
• Sealed housing with a Gore-Tex® ventilation plug.
• Controllable output up to 1,150 watts.
• Equipped with a dimming knob for manual light output adjustment.
• Features a Repeater Bus interface for control with a Gavita EL Controller (sold separately).
• Connect up to 100 fixtures in a single daisy chain series, up to five daisy chains per EL controller output.
• A single EL controller output can control up to five 100-fixture daisy chains.

• Optimized for young plant propagation of vegetable and ornamental crops.
• Ideal for tissue culture, seedlings, and cutting/cloning propagation.
• Features a sleek form-factor, broad-spectrum light, and world-class energy efficiency.
• An average PPFD up to 160 µmol/m2/s over a 2' x 4' (61 x 122 cm) area with a 12" (30 cm) mounting height above canopy.
• Includes 10 lighting modules and covers 80 square feet (7.43 square meters) of canopy.
• Allows mounting as close as five inches (12.7 centimeters) from the plant canopy.
• Enables quick and easy deployment with a one-to-many design connecting up to ten modules to one power supply.
• Designed for a wide range of vertical farming applications.

• High-performance LED grow light designed for craft cultivation.
• Optimized 1,600 µmol/s (PPF) output.
• PhysioSpec™ Broad R4 spectrum for full-cycle cultivation.
• 0-100% dimmer included for easy light intensity control.
• Package includes a 6-foot (1.8-meter) power cord.

Frame accessory for Fluence RAZR Modular rack fixtures with 6 inch (15 centimeter) or 8 inch (20 centimeter) light bar spacing.

• Optimized for full-cycle leafy green, basil, strawberry and culinary herb production.
• Early-stage vegetative growth for vegetables, ornamentals, and other cultivars.
• Features a sleek form-factor, broad-spectrum light, and world-class energy efficiency.
• An average PPFD up to 375 µmol/m2/s over a 2' x 4' (61 x 122 cm) area with a 5” (12.7 cm) mounting height above canopy.
• Includes 5 lighting modules and covers 40 square feet (3.7 square meters) of canopy.
• Allows mounting as close as five inches (12.7 centimeters) from the plant canopy.
• Enables quick and easy deployment with a one-to-many design connecting up to ten modules to one power supply.
• Designed for a wide range of vertical farming applications.