Lighting

Replacement fuses for The ACE™ Digital Ballast.

• State-of-the-art, UL-approved electronic ballasts.
• Compatible with both MH and HPS bulbs.
• Features a dimmable switch with the ability to adjust watt output for three different settings.
• Has carefully arranged circuit boards and stainless steel ball bearing fans.
• Runs 15% cooler than standard ballasts, ensuring longer life and improved performance.
• Generator-ready with the most stable output frequency of any comparable ballast.
• Results in lower power loss and better overall power management.
• Has a power factor of 99.9% for 100% of the time.
• Far more efficient than older core and coil ballasts.

• Premium 600 V, 1500 W, 5KV-pulse-rated porcelain mogul base sockets.
• Accommodate all mogul base bulbs in a universal position.
• Mogul cap and washer are included.
• Available with leads or without leads.

• Comes with a universal position mogul socket.
• Mounted to an engineered and modified powder-coated octagonal wire box with a hanger.
• Lamp cord includes a LightEnerG Wire Strain Relief for added durability.
• Plug the male end into a LightEnerG ballast and add the appropriate lamp and reflector.

• Comes with a universal position mogul socket with a hanger.
• Lamp cord includes LightEnerG wire strain relief for added durability.

• Bare-wire-end male power cords.
• Used between a ballast and a power outlet.

• High quality plugs securely connect to any IEC14 ballast.
• Male 120 V or 240 V plugs.
• Female IEC13 end.
• Gauge: 14/3.
• Length: 6 feet (1.8 meters).

• Versatile bare-wire-end female power cords.
• Suitable for a variety of applications.

• Used between a ballast and a mogul socket or reflector.
• Plug the male end into the ballast.
• Hard-wire the bare wire end to the mogul socket or reflector.
• Voltage: 300 V.
• Available in a range of sizes.

• Used between a ballast and a mogul socket or reflector.
• Plug the male end into the ballast.
• Hard-wire the bare wire end to the mogul socket or reflector.
• Voltage: 600 V.
• Available in a range of sizes.

• DLI JOULE-Series double-ended light fixtures.
• Optimized for low-ceiling rooms and greenhouses.
• Efficiency and uniformity guarantee over 95% light transmission to plants.
• Built-in spirit level ensures even light spread.
• Each light ray is either transmitted directly to plants or hits the aluminum reflector once.

• Increases the distance from the ballast to the reflector.
• Used between a ballast and a male lamp cord.
• Features both male and female ends.

• Feature both male and female ends.
• Connects a ballast and male power cord attached to a socket.

• Designed to outperform standard HPS lamps.
• Light spectrum shifted towards the red make them ideal during the flowering stage.
• Added blue spectrum for vegetative growth efficiency.
• Provide more energy which is essential for optimized photosynthetic response.
• Lamps can be used in both the horizontal and vertical position with the appropriate HPS ballast.

• Designed to outperform standard MH bulbs.
• Light spectrum shifted toward blue make them ideal for the vegetative stage.
• Added red spectrum for flowering efficiency.
• Can be used in the horizontal and vertical position with the appropriate MH ballast.

• Optimized for either vegetative or flowering stages of growth.
• Approved for use with all ballasts.
• Suits the needs of both professional and hobbyist gardeners.
• Better PAR efficiency than MH or HPS lamps.
• Superior lamp to color consistency.
• Creates a spectrum close to that of the sun.
• Lower heat output watt-per-watt.

• Designed to outperform standard MH lamps.
• Higher PAR efficiency than MH or HPS lamps.
• Superior lamp to color consistency.
• High initial and maintained lumens.
• Dependable long life (15,000+ hours).
• Universal Burning Position.
• High efficacy / low operating cost.
• Can work with both normal- and pin-operated sockets.
• Environmentally friendly.
• Lower heat output watt-per-watt.

• Optimized for vegetative or flowering stages of growth.
• Higher PAR efficiency than MH or HPS lamps.
• Creates a spectrum close to that of the sun.
• Superior lamp to color consistency.
• Lower heat output watt per watt.

• Used with HID ballasts to store energy.
• Delivers long life and high temperature operation.
• Made in North America.

• Used with HID ballasts and capacitors to start HPS bulbs.
• Engineered for long life and high temperature operation.

• Used with the LightEnerG Premium or Econo Cord and Socket Set.
• Provides mounting and support for the bulb and shade assembly.
• Proprietary design.

The LightEnerG™ Cone Reflector comes in either a chrome or white finish for maximum light reflection. The cone shape provides broad light diffusion and it comes with 4 pieces that make the base, a bracket to hold a mogul socket and screws. It’s light weight, easy to assemble and can accommodate all bulbs (not included). Mogul socket and power cord sold separately.

LightEnerG™ Light Wing Reflectors are made from German aluminum for 95% reflectivity. Customize these reflectors by bending the aluminum to create the desired lighting for your plants. They’re ultra lightweight and come pre-wired with a Leviton socket, hangers and 15' 16/3 600v lamp cord that is ready to plug into your LightEnerG™ Ballast. Light Wing Reflectors can accommodate most bulbs (not included) and can be purchased in white.

LightEnerG™ Light Tube 1 Air Cooled Reflectors are ETL approved and designed with the best air circulation and light reflectivity available. The interior reflective surface features a specially angled shape with highly reflective German specular aluminum, while the powder coated white enamel exterior protects it from the elements. On top of this, their light tubes provide the most unobstructed air flow in any standard air cooled reflector, allowing you to position your lamps closer to your pl

• Increases growing area under each lamp to maximize yields.
• Adjustable settings allows it to be positioned close to plants for greater area coverage.
• Simulates seasonal conditions indoors.
• Manufactured using high-end materials for efficient light and heat transfer.
• Accommodates all mogul based HID bulbs.
• Pre-wired with 15-ft (4.6-m) lamp cord and mogul socket.