Create the ideal lighting environment for your greenhouse or growroom with high-performance solutions from trusted brands like Fluence , Gavita , and more. Whether you're looking for LED, HPS, or MH lighting equipment, we provide a comprehensive selection of fixtures, lamps, electrical components, cords, cables, and hangers to meet your needs. Connect with our lighting specialists for personalized support, a complimentary lighting map, and insights into available rebates that can maximize your investment.
Featured products
Add to compare list
P_00450
High-performance top lighting designed for commercial growers. Ideal for those wanting to push high-PPFD cultivation. Suitable for experimental applications or treatments.
Add to compare list
P_00533
The Fluence VYPR 3p offers high fixture PPF up to 2,330 µmol/s and high efficacy up to 3.8 µmol/s, enabling the direct replacement of a 1,000 W HPS fixture at more than 40% energy savings.
An optional reflector kit provides a wider light pattern and uniform PPFD at plant canopy.
Add to compare list
Q101147
Maximizes the grow space for higher crop yields and better quality. Designed for single or multi-tier growers. A bright and flexible rack lighting solution. Light output PPF: 2,180 µmol/s. Efficacy: 2.75 µmol/J @ 277V AC. AC input power: 790 W @ 277 V AC. Certifications: IEC60598-1, UL 8800, UL 1598 Wet Location, DLC. Spectrum: PhysioSpec™ Broad R4. Length: 47 inches (1,194 millimeters).
Add to compare list
Q102008
The Fluence RAPTR Series is a high-output top light ideal for 1:1 HPS replacement in controlled environment agriculture. Designed to deliver maximum intensity with industry-leading efficacy, RAPTR is available with two optical distributions and a range of Physiospecâ„¢ spectrums tailored for high intensity indoor horticulture and high-efficiency greenhouse applications.
Add to compare list
Q102593
Includes the HR96 Reflector for maximum efficiency and uniformity. Designed with broad light dispersion in mind. Highly efficient passive ballast cooling for longer fixture life. Sealed housing with a Gore-Tex® ventilation plug. Controllable output up to 1,150 watts. Equipped with a dimming knob for manual light output adjustment. Features a Repeater Bus interface for control with a Gavita EL Controller (sold separately). Connect up to 100 fixtures in a single daisy chain series, up to five daisy chains per EL controller output. A single EL controller output can control up to five 100-fixture daisy chains.
Add to compare list
Q112719
Broad white light with enhanced blue spectrum which may intensify terpene and cannabinoid profiles. A light weight, foldable, 6-bar design based on the Gavita Pro RS 2400e LED platform for balanced output and efficiency. Dimmable down to 10% with the Gavita EL3 Master controller (sold separately). Premium Gavita diodes. Broad Range Gavita driver to accomodate a larger voltage range of 208 - 480 V. IP66 wet rating and ANSI/CAN/UL 8800 compliant. Assembled in the USA using foreign components. Dimensions: 44.8 in x 43.25 in x 3.3 in (113.8 x 109.9 x 8.4 cm) Weight: 29.8 lbs (13.5 kg).
Sort by
Position
Name Asc
Name Desc
Price Asc
Price Desc
Newest
Sku Asc
Sku Desc
Stock Asc
Stock Desc
Display
25
40
60
items per page
Add to compare list
Add to compare list
Add to compare list
Add to compare list
Add to compare list
Add to compare list
Q001066
The Fluence SPYDR FANG is a high-performance LED grow light for craft cultivation. Enabling micro-growers to command their grow with an optimized 1600 µmol/s (PPF) output, PhysioSpec™ Broad R4 spectrum, and included 0-100% dimmer for easy control and full-cycle cultivation.
Add to compare list
Q100882
Perfect for working in dimly lit or dark spaces. Three settings: high, low and flash. Long life: lasts 4-5 hours on high, and up to 30 hours when set to low. Features zoom functionality. Includes green lens that improves depth of field. Constructed from water-proof material. Output power of 20 lumens.
Add to compare list
Q100883
Reliable for high yields. Maintains performance across many growth cycles. Exclusive DE spectrum provides 1,950 µmol PPF at 1,000 W. Delivers 2,100 µmol PPF when operated at 1,150 W.
Add to compare list
Q100915
Designed to maximize plant growth by optimizing the three necessary lighting components. Provides a quality spectrum that maximizes plant quality and high yields. Included e-ballast provides a consistent and stable power supply to the lamp for reliability of operation. Reflector focuses all available light produced by the lamp and targets the canopy of the plants with a uniform distribution of photons. Will provide the highest quality plants and yields for many years with proper system maintenance. Includes HORTILUX 600W Ceramic HPS and HORTILUX 600W Blue Metal Halide lamps.
Add to compare list
Q100887
Combines Super HPS and HORTILUX Blue lamps into one. Offers an all-in-one solution for both first-time and experienced indoor growers. Integrates the power of two grow lights: HPS and MH combo lamp.
Add to compare list
Q100937
Magnetic ballast features specialized switch to easily flip between MH and HPS lamps. Can run on 120 V or 240 V. Pre-assembled: No additional wiring is necessary. Galvanized steel construction. Top of the line Aerovox® capacitor included. Cord receptacle accepts all LightEnerG lamp cords and reflectors. Super duty handles. Rubber base supports for increased heat dissipation and noise dampening. Includes 15-foot (4.6-meter) lamp wire and 6-foot power cord (120 V). 240 V power cord sold separately.
Add to compare list
Q100925
Extremely efficient low-heat horticultural lighting system. T5 Super High Output (SHO) lighting provides an ideal spectrum for plant growth. Minimal heat output allows placement 6 to 8 in (15.24 to 20.32 cm) above plant canopy. No risk of scorching leaves, unlike MH lighting. Closer placement maximizes photosynthetic response and promotes fuller growth at lower wattage. Includes T5 SHO grow bulbs, built-in ballast, hanging hardware, and 12-foot (3.7-meter) grounded power cord. Two-year rebuild or replace warranty. ETL approved. Dimensions (L x W x H): 2 ft x 25.5 in x 3 in (60 x 65 x 7.6 cm).
Add to compare list
Q100930
UL approved magnetic ballast. Specialized switch for changing between MH and HPS bulbs. Switch between 120 V and 240 V power. 8-foot (2.4 m) 240 V power cord included. 120 V power cord available separately. No additional wiring needed.
Add to compare list
Q100950
Fastest and easiest way to secure a lamp cord to mogul sockets. Offer improved strain relief and mechanical structure for wire terminations. Extend cable flex life. Mogul socket and wire are not included.
Add to compare list
Q100951
Comes with a universal position mogul socket. Lamp cord includes LightEnerG wire strain relief for added durability. Bare wire end. Gauge: 14/3. Voltage: 300 V. Length: 15 feet (4.5 meters).
Add to compare list
Q100946
600 volt, 1,500 watt, 5kV pulse-rated porcelain mogul base sockets. Accommodate all mogul base bulbs in a universal position. Mogul cap and washer included. No lead.
Add to compare list
Q100947
600 volt, 1,500 watt, 5kV pulse-rated porcelain mogul base sockets. Accommodate all mogul base bulbs in a universal position. Mogul cap and washer included. With lead.
Add to compare list
Q100976
Connects Brand X ballasts with LightEnerG light fixtures. Ensures compatibility with all LightEnerG lamp cords and reflectors. Gauge: 14/3. Voltage: 600 V. Length: 1 foot (30 centimeters).
Add to compare list
Q100977
Used between a ballast and a male lamp cord. Can turn any ballast into a LightEnerG-compatible ballast. Can also be plugged in to the end of LightEnerG fixtures to create a bare wire end. Gauge: 14/3. Length: 1 foot (30 centimeters). Voltage: 300 V.
Add to compare list
Q100980
Increases the distance from the ballast to the reflector. Used between a ballast and a male lamp cord. Features both male and female ends. Gauge: 14/3. Length: 1 foot (30 centimeters). Voltage: 300 V.
Add to compare list
Q100978
Used between a ballast and a male lamp cord. Can turn any ballast into a LightEnerG-compatible ballast. Can also be plugged in to the end of LightEnerG fixtures to create a bare wire end. Gauge: 14/3. Length: 6 foot (1.8 meters). Voltage: 300 V.
Add to compare list
Q100979
Used between a ballast and a male lamp cord. Can turn any ballast into a LightEnerG-compatible ballast. Can also be plugged in to the end of LightEnerG fixtures to create a bare wire end. Gauge: 14/3. Length: 1 foot (30 centimeters). Voltage: 600 V.
Add to compare list
Q100990
Grow and flowering lamp designed for high output and performance. Features both high pressure sodium (HPS) and metal halide (MH) cores. Provides the red light of HPS bulbs and the blue light of MH bulbs. Suitable for use throughout the entire growth cycle with just one bulb. Emits 117,000 initial lumens. Rated for a 12,000-hour life, lasting multiple growth cycles. Can be used with any 1,000 W HPS ballast.
Add to compare list
Q100994
Designed to operate flawlessly with metal halide lighting systems. Allows one-dimensional systems to act as complete lighting systems by accepting both metal halide (MH) and this conversion bulb. Provides optimum red spectral energy to promote flowering and fruiting in plants. Metal halide bulbs promote plant growth. Wattage: 940 W.
Add to compare list
Q101006
Higher red spectral ratio enhances flowering and growth. Robust plants through high blue light output. Maintains results after multiple growth cycles, saving you time and money. Made for quality, consistency and yield. Outperforms standard HPS lamps. Proper UV balance. 2,100 K. 2,100 µmol.