Lighting

Lighting control at your fingertips! The Master controller EL 1 and EL2 Gen 2 are Gavita®'s entry-level systems for centrally controlling large rooms with e-series fixtures. The second generation of Master controllers features improved and expanded functionality that raises the bar including non-volatile memory, event logging, independent sunrise and sunset setting and independent light cycles on the EL2. The EL 1 has one lighting control channel and the EL2 has two lighting control channels. The EL 1 can control 500 max repeater bus fixtures and 40 max single bus fixtures without a booster. The EL2 can control 1000 max repeater bus fixtures and 80 max single bus fixtures without a booster.

The Gavita® E-series Interconnect Cables are used to supply controller signal from ballast to additional ballasts (daisy chain) for use with the Gavita Master Controllers. They come in 2-, 5-, 8-, and 10-foot (61-centimeter, 1.5-, 2.4-, and 3-meter) configurations to best fit your specific application.

Gavita® Controller Cables attach to Gavita Master controller to the Gavita E-Series ballast. These come in 5, 16 and 25 ft configurations to best fit your specific application.

• Eight-foot (2.4 meter) power cord for Gavita® LED fixtures.
• 277- to 400-volt bare wire to 5-pin Wieland connection.

• Eight-foot (2.4 meter) power cord for Gavita® LED fixtures.
• 120-volt plug to 5-pin Wieland connection.

• Eight-foot (2.4 meter) power cord for Gavita® LED fixtures.
• 208- to 240-volt plug to 5-pin Wieland connection.

Gavita® horticultural High Pressure Sodium (HPS) lamp with high output and extreme long light maintenance. Change once a year for best results. Light maintenance 5,000 hrs: >96%. Color temperature is 2,100° K and the lamp base is K12 x 30s. Suitable for High Frequency Gavita ballasts. The jacket of this double-ended lamp is made from quartz glass. Do not handle with bare hands. Oil from your hands can damage the lamp.

Replacement reflector for the Gavita® Pro line and HortiStar requires no tools to install. The medium spread of this reflector with 100° beam angle is great for tents and small rooms. This is Gavita’s most suitable reflector for single-light set ups. The 100° is designed for uniformity and deep crop penetration in 1-2 fixture configurations. Suitable for double-ended 750-1,000W HPS.

The Gavita® Pro 1700e LED is a 1700 µmol s-1 fixtures with an impressive efficiency of 2.7 µmol s-1 per watt. The pro 1700e delivers broad coverage with its 8 passively cooled LED bard. The 8-bar configuration allows you to use it in low rooms, over single benches, or even in 4 x 4 ft or 5 x 5 ft tents. This powerful, full-spectrum light source is intended for full term plant growth from the vegetative stage to the higher light requiring bloom stage. Fixture is dimmable to 50% without any loss of efficiency with the use of the Master Controllers. The Gavita E-Series Led adaptor 120-277V #906151 or 367V #906150 (sold separately) is needed for each fixture when using the controller. This fixture is build with high-quality 120-277 or 347 volt Philips brand drivers. Sun Grip® light hangers are included for handing the fixture. Dimensions 44.1 in x 44.1 in x 2.1 in. 630 watts. The Gavita Pro 1700e fixtures are UL listed, IP66 wet location rated, and FCC compliant.

• Connects Gavita LED fixtures together.
• 10-foot (3-meter) RJ45-to-RJ45 signal cable.

• Connects Gavita® EL1 or EL2 controllers to the first Gavita LED fixture.
• 25-foot (7.5-meter) RJ45-to-RJ9 signal cable.

• Designed to be used with Gavita 1700e LED fixtures.
• Branches the signal into dual output paths.
• For cables with RJ45 connectors.

The Fluence SPYDR FANG is a high-performance LED grow light for craft cultivation. Enabling micro-growers to command their grow with an optimized 1600 µmol/s (PPF) output, PhysioSpec™ Broad R4 spectrum, and included 0-100% dimmer for easy control and full-cycle cultivation.

• The Gavita® CT 1930e is the first LED to directly replace HPS.
• Fits seamlessly into existing HPS layouts.
• Highly energy-efficient delivering serious growing power.
• Designed as a 1:1 layout replacement for the Gavita Pro 1000e DE HPS.
• Compatible with wiring and electrical requirements for most indoor growing environments.
• Limits the cost and downtime required to convert facilities of every size.
• Delivers more light in a broader spectrum with up to 20% energy savings compared to Gavita 1000 W DE and single-ended HPS fixtures.*
• Compatible with Gavita EL Master Controllers (sold separately) and most building automation systems.
• Embedded controller technology enables control of up to 2,000 fixtures per EL Master control channel.
• Voltage: 120-277 V.

*based on average wattage of each fixture.

• The Gavita® CT 1930e is the first LED to directly replace HPS.
• Fits seamlessly into existing HPS layouts.
• Highly energy-efficient delivering serious growing power.
• Designed as a 1:1 layout replacement for the Gavita Pro 1000e DE HPS.
• Compatible with wiring and electrical requirements for most indoor growing environments.
• Limits the cost and downtime required to convert facilities of every size.
• Delivers more light in a broader spectrum with up to 20% energy savings compared to Gavita 1000 W DE and single-ended HPS fixtures.*
• Compatible with Gavita EL Master Controllers (sold separately) and most building automation systems.
• Embedded controller technology enables control of up to 2,000 fixtures per EL Master control channel.
• Voltage: 277-480 V.

*based on average wattage of each fixture.

These environmentally friendly ArgoLED® Sun® 48 fixtures produce over 21,900 lumens and 316.806 PPFD from only 187 watts of consumed power.

White powder-coated steel housing is durable with louvers to ensure proper thermal management. V-hangers are included with every fixture that allows the fixture to hang vertically or horizontally. 8 foot power cord and on/off switch allows for easy operation. Daisy chain feature makes for an ideal installation for multiple fixtures to be plugged together.

This 6,500° K LED fixture is the smart choice for prop and veg cycles of your plants' life.

• Connects Gavita® EL3 Master controller to first Titan Controls® VPD Sensor or Titan Controls® Substrate Sensor.
• Products then daisy chain together after this first connection.

Lighting control at your fingertips! The Master controller EL 1 and EL2 Gen 2 are Gavita®'s entry-level systems for centrally controlling large rooms with e-series fixtures. The second generation of Master controllers features improved and expanded functionality that raises the bar including non-volatile memory, event logging, independent sunrise and sunset setting and independent light cycles on the EL2. The EL 1 has one lighting control channel and the EL2 has two lighting control channels. The EL 1 can control 500 max repeater bus fixtures and 40 max single bus fixtures without a booster. The EL2 can control 1000 max repeater bus fixtures and 80 max single bus fixtures without a booster.

• Used to operate one or more Gavita® CT 1930e light fixtures without the use of a lighting controller.
• Ensures continuous operation at 100% output* when placed on the input of the first fixture.

• 400 V high-frequency lamp.
• Produces 2,120 µmol/s at 1,000 watts and 2,400 µmol/s at 1,150 watts.
• Features nitrogen fill and quartz glass outer jacket for optimal optical quality.
• Made in Belgium.

• Superior color quality and very crisp white light.
• High 1.95 PPF (photosynthetic photon flux) per watt per second.
• Available in 3,100° K Green Power or 4,200° K color temperatures.
• High 92 CRI and 33,000 initial lumens (105 Lm/W).
• 90% lumen maintenance at 8,000 hours; 85% at 20,000 hours.
• Double glass jacketed lamp rated for open or enclosed fixture use.
• Bi-pin base compatible with Sun System LEC Brand Technology Fixtures.
• Optimized for use with Philips brand electronic ballast; may experience shortened life with other fixtures.

• Delivers SUPER high output; outperforms standard HPS bulbs.
• Maximized output in both red and blue spectral ranges.
• Optimized for maximum flower yield.
• Added blue spectrum enhances vegetative growth efficiency.
• Operates with HPS ballast.

• Double-ended HPS lamp for plant growth.
• High red and blue spectral ratios enhance photosynthesis efficiency.
• Excellent lumen output ensures high PAR values.
• Promotes robust plants with high blue light output.
• High red light ratio supports healthy plant growth.
• Economic: long average life, high lumen output, low energy consumption.
• Tubular low profile design suits compact fixtures.
• Delivers 325 µmol.
• Quartz glass jacket.

• 1,000 watt double-ended (DE) MH lamp.
• 5,500K color temperature, similar to daylight.
• High blue light ratio and full spectrum output for healthy plant growth.
• Superior µmol output within the PAR spectral range.
• Meets industry quality ISO 9001 standards.
• Best-in-class reliability over its lifetime.
• Easy lamp change.
• Optimized design for use in open luminaires.