Lighting

• Feature both male and female ends.
• Connects a ballast and male power cord attached to a socket.
• Gauge: 14/3.
• Length: 1 foot (30 centimeters).
• Voltage: 600 V.

• Grow and flowering lamp designed for high output and performance.
• Features both high pressure sodium (HPS) and metal halide (MH) cores.
• Provides the red light of HPS bulbs and the blue light of MH bulbs.
• Suitable for use throughout the entire growth cycle with just one bulb.
• Emits 117,000 initial lumens.
• Rated for a 12,000-hour life, lasting multiple growth cycles.
• Can be used with any 1,000 W HPS ballast.

• Designed to outperform standard HPS lamps.
• Light spectrum shifted towards the red make them ideal during the flowering stage.
• Added blue spectrum for vegetative growth efficiency.
• Provide more energy which is essential for optimized photosynthetic response.
• Lamps can be used in both the horizontal and vertical position with the appropriate HPS ballast.
• Wattage: 400 W.

• Designed to operate flawlessly with metal halide lighting systems.
• Allows one-dimensional systems to act as complete lighting systems by accepting both metal halide (MH) and this conversion bulb.
• Provides optimum red spectral energy to promote flowering and fruiting in plants.
• Metal halide bulbs promote plant growth.
• Wattage: 940 W.

• Used to attach LightEnerG power cords to ballasts.
• Must be wired by a qualified electrician.

• Allows an individual ballast to run two separate lights individually.
• Switches back and forth between each light at a user-specified interval.
• Can be controlled by your own timer.

• Maximizes the grow space for higher crop yields and better quality.
• Designed for single or multi-tier growers.
• A bright and flexible rack lighting solution.
• Light output PPF: 2,180 µmol/s.
• Efficacy: 2.75 µmol/J @ 277V AC.
• AC input power: 790 W @ 277 V AC.
• Certifications: IEC60598-1, UL 8800, UL 1598 Wet Location, DLC.
• Spectrum: PhysioSpec™ Broad R4.
• Length: 47 inches (1,194 millimeters).

• Bare-wire-end male power cords.
• Used between a ballast and a power outlet.
• Gauge: 16/3.
• Length: 6 feet (1.8 meter).

• Versatile bare-wire-end female power cords.
• Suitable for a variety of applications.
• Gauge: 14/3.
• Length: 3 feet (1 meter).

• Versatile bare-wire-end female power cords.
• Suitable for a variety of applications.
• Gauge: 14/3.
• Length: 6 feet (1.8 meter).

• Used between a ballast and a mogul socket or reflector.
• Plug the male end into the ballast.
• Hard-wire the bare wire end to the mogul socket or reflector.
• Gauge: 14/3.
• Length: 1 foot (30 centimeters).
• Voltage: 300 V.

• Used between a ballast and a mogul socket or reflector.
• Plug the male end into the ballast.
• Hard-wire the bare wire end to the mogul socket or reflector.
• Gauge: 14/3.
• Length: 1 foot (30 centimeters).
• Voltage: 600 V.

• Used between a ballast and a male lamp cord.
• Can turn any ballast into a LightEnerG-compatible ballast.
• Can also be plugged in to the end of LightEnerG fixtures to create a bare wire end.
• Gauge: 14/3.
• Length: 1 foot (30 centimeters).
• Voltage: 300 V.

• Designed to outperform standard MH bulbs.
• Light spectrum shifted toward blue make them ideal for the vegetative stage.
• Added red spectrum for flowering efficiency.
• Can be used in the horizontal and vertical position with the appropriate MH ballast.
• Wattage: 1,000 W.

• Designed to outperform standard MH lamps.
• Emits a blue light spectrum ideal for the vegetative stage of growth.
• Added red spectrum for flowering efficiency.
• Higher PAR efficiency than MH or HPS lamps.
• Superior lamp to colour consistency.
• High initial and maintained lumens.
• Dependable long life (15,000+ hours).
• Universal Burning Position.
• High efficacy/ low operating cost.
• Can work with both normal- and pin-operated sockets.
• Environmentally friendly.
• High color rendering index (CRI): 90+ out of 100.
• Lower heat output watt-per-watt.
• 4,000 K.
• 588 µmol.

Fluence Wireless Flex Dimming delivers simplicity, flexibility, and cost savings to your grow operation by replacing dimming cables to each light fixture with wireless control. Wireless Flex Dimming realizes tremendous labor costs savings from reduced installation time, eliminating potential wiring errors. Simply plug a Wireless Flex Dimming Receiver into the dimming port of each Fluence light fixture, install a Wireless Flex Dimming 0-10 V adapter, and connect the 0-10 V dimming control per zone.

Wireless Flex Dimming features qualified Bluetooth mesh technology enabled by SILVAIR that is fully compatible with any 0-10 V dimmer or environmental controllers. Wireless Flex Dimming is easy to configure and enables HPS to LED retrofit growers to add precise dimming control without installing new wiring, maximizing ROI.

• Three-way splitter.
• 6P6C connection jacks.
• Four-piece kit.

• Combines Super HPS and HORTILUX Blue lamps into one.
• Offers an all-in-one solution for both first-time and experienced indoor growers.
• Integrates the power of two grow lights: HPS and MH combo lamp.

• State-of-the-art, UL-approved electronic ballast.
• Compatible with both MH and HPS bulbs.
• Features a dimmable switch with the ability to adjust watt output for three different settings.
• Has carefully arranged circuit boards and stainless steel ball bearing fans.
• Runs 15% cooler than standard ballasts, ensuring longer life and improved performance.
• Generator-ready with the most stable output frequency of any comparable ballast.
• Results in lower power loss and better overall power management.
• Has a power factor of 99.9% for 100% of the time.
• Far more efficient than older core and coil ballasts.
• Wattage: 600 W.

• High-performance top lighting designed for commercial growers.
• Ideal for those wanting to push high-PPFD cultivation.
• Suitable for experimental applications or treatments.
• Size: 47 inches (119 centimeters).
• Light bar only.