Lighting

• 1,000 watt double-ended (DE) MH lamp.
• 5,500K color temperature, similar to daylight.
• High blue light ratio and full spectrum output for healthy plant growth.
• Superior µmol output within the PAR spectral range.
• Meets industry quality ISO 9001 standards.
• Best-in-class reliability over its lifetime.
• Easy lamp change.
• Optimized design for use in open luminaires.

REFURBISHED PRODUCT

• 30 DAY WARRANTY.
• BULBS ARE NOT INCLUDED.
• NOT IN ORIGINAL PACKAGING.
• Dimensions (L x W x H): 4 ft x 25.5 in x 3 in (122 x 64 x 7.6 cm).

• Extremely efficient low-heat horticultural lighting system.
• T5 Super High Output (SHO) lighting provides an ideal spectrum for plant growth.
• Minimal heat output allows placement 6 to 8 in (15.24 to 20.32 cm) above plant canopy.
• No risk of scorching leaves, unlike MH lighting.
• Closer placement maximizes photosynthetic response and promotes fuller growth at lower wattage.
• Includes T5 SHO grow bulbs, built-in ballast, hanging hardware, and 12-foot (3.7-meter) grounded power cord.
• Two-year rebuild or replace warranty.
• ETL approved.
• Dimensions (L x W x H): 2 ft x 14.5 in x 3 in (60 x 37 x 7.6 cm).

• UL approved magnetic ballast.
• Specialized switch for changing between MH and HPS bulbs.
• Switch between 120 V and 240 V power.
• 8-foot (2.4 m) 240 V power cord included.
• 120 V power cord available separately.
• No additional wiring needed.

• 1,000 watt magnetic ballast.
• Can easily switch between MH and HPS bulbs by flipping a specialized switch.
• Also switchable between 120 V and 240 V.
• Use provided 120 V cord or 240 V cord (sold separately).
• No additional wiring is necessary.
• The aluminum housing dissipates heat and keeps components cool.
• Includes a top-of-the-line Aerovox® capacitor.
• Lamp cord receptacle accepts all LightEnerG lamp cords and reflectors.

• 400 watt magnetic ballast.
• Can easily switch between MH and HPS bulbs by flipping a specialized switch.
• Also switchable between 120 V and 240 V.
• Use provided 120 V cord or 240 V cord (sold separately).
• No additional wiring is necessary.
• The aluminum housing dissipates heat and keeps components cool.
• Includes a top-of-the-line Aerovox® capacitor.
• Lamp cord receptacle accepts all LightEnerG lamp cords and reflectors.

• Magnetic ballast capable of switching between 120 V and 240 V.
• Use either the 120v or a 240v power cord (sold separately) to change the voltage of the ballast.
• No additional wiring is necessary.
• Can also be used with 600 W MH conversion lamps.
• Aluminum housing is specially designed to dissipate heat and keep components cool.
• Includes a top-of-the-line Aerovox® capacitor.
• Lamp cord receptacle accepts all LightEnerG lamp cords and reflectors.

• Magnetic ballast capable of switching between 120 V and 240 V.
• Use either the 120v or a 240v power cord (sold separately) to change the voltage of the ballast.
• No additional wiring is necessary.
• Can also be used with 600 W MH conversion lamps.
• Aluminum housing is specially designed to dissipate heat and keep components cool.
• Includes a top-of-the-line Aerovox® capacitor.
• Lamp cord receptacle accepts all LightEnerG lamp cords and reflectors.

• UL certified ballast unit.
• North American made capacitor.
• Quad-tap (120 V, 208 V, 240 V, and 277 V).
• Must be assembled by a qualified electrician.
• Only for use with HPS bulbs.

• UL certified ballast unit.
• North American made capacitor.
• Quad-tap (120 V, 208 V, 240 V, and 277 V).
• Must be assembled by a qualified electrician.
• Only for use with MH bulbs.

• State-of-the-art, UL-approved electronic ballast.
• Compatible with both MH and HPS bulbs.
• Features a dimmable switch with the ability to adjust watt output for three different settings.
• Has carefully arranged circuit boards and stainless steel ball bearing fans.
• Runs 15% cooler than standard ballasts, ensuring longer life and improved performance.
• Generator-ready with the most stable output frequency of any comparable ballast.
• Results in lower power loss and better overall power management.
• Has a power factor of 99.9% for 100% of the time.
• Far more efficient than older core and coil ballasts.
• Wattage: 1,000 W.

• State-of-the-art, UL-approved electronic ballast.
• Compatible with both MH and HPS bulbs.
• Features a dimmable switch with the ability to adjust watt output for three different settings.
• Has carefully arranged circuit boards and stainless steel ball bearing fans.
• Runs 15% cooler than standard ballasts, ensuring longer life and improved performance.
• Generator-ready with the most stable output frequency of any comparable ballast.
• Results in lower power loss and better overall power management.
• Has a power factor of 99.9% for 100% of the time.
• Far more efficient than older core and coil ballasts.
• Wattage: 400 W.

• 600 volt, 1,500 watt, 5kV pulse-rated porcelain mogul base sockets.
• Accommodate all mogul base bulbs in a universal position.
• Mogul cap and washer included.
• No lead.

• 600 volt, 1,500 watt, 5kV pulse-rated porcelain mogul base sockets.
• Accommodate all mogul base bulbs in a universal position.
• Mogul cap and washer included.
• With lead.

• Premium 600 V, 1500 W, 5KV-pulse-rated porcelain mogul base sockets.
• Accommodate all mogul base bulbs in a universal position.
• Mogul cap and washer are included.

• Premium 600 V, 1500 W, 5KV-pulse-rated porcelain mogul base sockets.
• Accommodate all mogul base bulbs in a universal position.
• Mogul cap, washer, and leads are included.

• Fastest and easiest way to secure a lamp cord to mogul sockets.
• Offer improved strain relief and mechanical structure for wire terminations.
• Extend cable flex life.
• Mogul socket and wire are not included.

• Comes with a universal position mogul socket.
• Lamp cord includes LightEnerG wire strain relief for added durability.
• Bare wire end.
• Gauge: 14/3.
• Voltage: 300 V.
• Length: 15 feet (4.5 meters).

• Used between a ballast and a male lamp cord.
• Can turn any ballast into a LightEnerG-compatible ballast.
• Can also be plugged in to the end of LightEnerG fixtures to create a bare wire end.
• Gauge: 14/3.
• Length: 6 foot (1.8 meters).
• Voltage: 300 V.

• Used between a ballast and a male lamp cord.
• Can turn any ballast into a LightEnerG-compatible ballast.
• Can also be plugged in to the end of LightEnerG fixtures to create a bare wire end.
• Gauge: 14/3.
• Length: 1 foot (30 centimeters).
• Voltage: 600 V.

• Increases the distance from the ballast to the reflector.
• Used between a ballast and a male lamp cord.
• Features both male and female ends.
• Gauge: 14/3.
• Length: 1 foot (30 centimeters).
• Voltage: 300 V.

• Increases the distance from the ballast to the reflector.
• Used between a ballast and a male lamp cord.
• Features both male and female ends.
• Gauge: 14/3.
• Length: 10 feet (3 meters).
• Voltage: 600 V.

• Increases the distance from the ballast to the reflector.
• Used between a ballast and a male lamp cord.
• Features both male and female ends.
• Gauge: 14/3.
• Length: 15 feet (4.5 meters).
• Voltage: 600 V.

• Increases the distance from the ballast to the reflector.
• Used between a ballast and a male lamp cord.
• Features both male and female ends.
• Gauge: 14/3.
• Length: 1 foot (30 centimeters).
• Voltage: 600 V.

• Adjustable-height reflector suspension system.
• Allows for up to 4.5 ft (1.4 m) of lift in one easy step.
• Sturdy and reliable mechanism.
• Keeps the reflector in place with a simple pull-string.
• Multi filament line.

• Feature both male and female ends.
• Connects a ballast and male power cord attached to a socket.
• Gauge: 14/3.
• Length: 1 foot (30 centimeters).
• Voltage: 300 V.