Grow Tents, Systems & Trays

• Made from a fire-retardant black polyethylene plastic.
• Oversized to fit easily onto connectors and fans.
• Very economical choice for temporary air diffusion.
• Convenient and quick installation will help reduce costs.
• Sold in rolls of 100 feet (30 meters).
• Marked approximately every foot for easy installation; instructions included.
• Made in North America with strict quality controls.
• Size: 12 inches x 100 feet (30 centimeters x 30 meters).

• Made from a fire-retardant black polyethylene plastic.
• Oversized to fit easily onto connectors and fans.
• Very economical choice for temporary air diffusion.
• Convenient and quick installation will help reduce costs.
• Sold in rolls of 100 feet (30 meters).
• Marked approximately every foot for easy installation; instructions included.
• Made in North America with strict quality controls.
• Size: 14 inches x 100 feet (35 centimeters x 30 meters).

Botanicare’s® Power Cloner models allow you to easily root and clone your favorite plants. Place any fruit, flower, herb, shrub, or tree cuttings in your Power Cloner and you’ll be amazed at the prolific roots initiated in only 5 - 10 days. Power Cloners initiate much larger cuttings than conventional methods, saving valuable gardening time. Power Cloners utilize the aeroponics method of rooting cuttings. Hardwood can take up to 30 days to initiate roots.T

• 4 Tray Jetstream.
• Top watering drip method utilizing four-gallon-per-hour emitters for efficient irrigation.
• Designed to prevent clogging, ensuring consistent feed.
• Offers flexibility for growers with larger configurations and reduced water usage compared to flood systems.
• Equipped with professional tub outlet drain fittings and removable screens for easy maintenance.
• Comes standard with 6-inch (15.24-centimeter) trays.

• 6 Tray Jetstream
• Top watering drip method utilizing four-gallon-per-hour emitters for efficient irrigation.
• Designed to prevent clogging, ensuring consistent feed.
• Offers flexibility for growers with larger configurations and reduced water usage compared to flood systems.
• Equipped with professional tub outlet drain fittings and removable screens for easy maintenance.
• Comes standard with 6-inch (15.24-centimeter) trays.

• 8 Tray Jetstream.
• Top watering drip method utilizing four-gallon-per-hour emitters for efficient irrigation.
• Designed to prevent clogging, ensuring consistent feed.
• Offers flexibility for growers with larger configurations and reduced water usage compared to flood systems.
• Equipped with professional tub outlet drain fittings and removable screens for easy maintenance.
• Comes standard with 6-inch (15.24-centimeter) trays.

• Manufactured with Avara Technology, a proprietary food-grade material.
• Patented, 4" Crystal Clear design, with Perfect Fit system for a secure fit with standard 1020 trays.
• Constructed from thick, high-grade material for excellent light transmission and long-term durability.
• Perfect 2-Finger Easy Vent ensures precise humidity control.
• BPA-free, non-off-gassing, reusable and recyclable, contains reclaimed ocean plastics.
• Dimensions (LxWxH): 21.5 x 11 x 4.2 in (54.61 x 27.94 x 10.67 cm).

• Ideal for residential, commercial, and industrial applications.
• Easy to install inline configuration, compatible with variable speed controllers.
• Designed to overcome resistance from long ducting; works with flexible and rigid ducting.
• Permanently lubricated for maintenance-free and continuous operation.
• Balanced fan and motor assembly for quiet, vibration-free performance.
• Features infinitely variable airflow with available 3-wire solid-state speed control.
• Suitable for light dust and fumes.
• Heavy-gauge, spun steel housing with baked epoxy finish inside and outside.
• Backward curved blades for low sound and ample static pressure.
• Durable external rotor motor with thermal reset overload protection.
• Pre-wired with 120-volt power cords.
• 4 in (10 cm) 152 CFM inline duct fan.

• Ideal for residential, commercial, and industrial applications.
• Easy to install inline configuration, compatible with variable speed controllers.
• Designed to overcome resistance from long ducting; works with flexible and rigid ducting.
• Permanently lubricated for maintenance-free and continuous operation.
• Balanced fan and motor assembly for quiet, vibration-free performance.
• Features infinitely variable airflow with available 3-wire solid-state speed control.
• Suitable for light dust and fumes.
• Heavy-gauge, spun steel housing with baked epoxy finish inside and outside.
• Backward curved blades for low sound and ample static pressure.
• Durable external rotor motor with thermal reset overload protection.
• Pre-wired with 120-volt power cords.
• 5 in (13 cm) 212 CFM inline duct fan.

• High performance inline fans.
• Feature superior plastic or metal construction.
• Speed controllable.
• Vibration-free operation.
• Come with pre-installed cords from the manufacturer.
• Protected by a 1 year warranty.
• 12 in (30 cm) 1,060 CFM metal fan.

• Designed to allow airflow in one direction.
• Minimum air leakage: exterior foam gaskets assure a tight seal.
• Aluminum spring-loaded backdraft damper blades.
• 20 gauge steel housing.
• Simple installation: entire assembly inserts into duct.
• Can be installed in any position: designed for vertical or horizontal mount.
• Specifically designed for use with ThermoFlo™ flexible ducting.
• Size: 4 inches (10 centimeters).

• Designed to allow airflow in one direction.
• Minimum air leakage: exterior foam gaskets assure a tight seal.
• Aluminum spring-loaded backdraft damper blades.
• 20 gauge steel housing.
• Simple installation: entire assembly inserts into duct.
• Can be installed in any position: designed for vertical or horizontal mount.
• Specifically designed for use with ThermoFlo™ flexible ducting.
• Size: 10 inches (25 centimeters).

• Designed to allow airflow in one direction.
• Minimum air leakage: exterior foam gaskets assure a tight seal.
• Aluminum spring-loaded backdraft damper blades.
• 20 gauge steel housing.
• Simple installation: entire assembly inserts into duct.
• Can be installed in any position: designed for vertical or horizontal mount.
• Specifically designed for use with ThermoFlo™ flexible ducting.
• Size: 12 inches (30 centimeters).

• Designed to allow airflow in one direction.
• Minimum air leakage: exterior foam gaskets assure a tight seal.
• Aluminum spring-loaded backdraft damper blades.
• 20 gauge steel housing.
• Simple installation: entire assembly inserts into duct.
• Can be installed in any position: designed for vertical or horizontal mount.
• Specifically designed for use with ThermoFlo™ flexible ducting.
• Size: 6 inches (15 centimeters).

• Designed to allow airflow in one direction.
• Minimum air leakage: exterior foam gaskets assure a tight seal.
• Aluminum spring-loaded backdraft damper blades.
• 20 gauge steel housing.
• Simple installation: entire assembly inserts into duct.
• Can be installed in any position: designed for vertical or horizontal mount.
• Specifically designed for use with ThermoFlo™ flexible ducting.
• Size: 8 inches (20 centimeters).

• High performance inline fans.
• Feature superior plastic or metal construction.
• Speed controllable.
• Vibration-free operation.
• Come with pre-installed cords from the manufacturer.
• Protected by a 1 year warranty.
• 10 in (25 cm) 780 CFM metal fan.

• Allows multiple ventilation areas to be accessed by a single inline-fan source or for several fans to join a single exhaust.
• The “Y” shape makes it useful in areas with tight access angles.
• Made with heavy-duty galvanized steel and powder coated white.
• Specifically designed to be used with ThermoFlo flexible ducting.
• Size: 12 x 12 x 12 inches (30 x 30 x 30 centimeters).

• Easily reduce or increase duct diameter to suit requirements.
• Made with heavy-duty galvanized steel.
• Powder coated white.
• Designed for use with ThermoFlo™ flexible ducting.
• Size: 14 inches to 10 inches (38 to 25 centimeters).

• Allows multiple ventilation areas to be accessed by a single inline-fan source or for several fans to join a single exhaust.
• The "T" shape makes it ideal for right-angle joins in large spaces.
• Made with heavy-duty galvanized steel and powder coated white.
• Specifically designed to be used with ThermoFlo flexible ducting.
• Size: 4 x 4 x 4 inches (10 x 10 x 10 centimeters).

• Allows multiple ventilation areas to be accessed by a single inline-fan source or for several fans to join a single exhaust.
• The "T" shape makes it ideal for right-angle joins in large spaces.
• Made with heavy-duty galvanized steel and powder coated white.
• Specifically designed to be used with ThermoFlo flexible ducting.
• Size: 10 x 10 x 10 inches (25 x 25 x 25 centimeters).

• Allows multiple ventilation areas to be accessed by a single inline-fan source or for several fans to join a single exhaust.
• The "T" shape makes it ideal for right-angle joins in large spaces.
• Made with heavy-duty galvanized steel and powder coated white.
• Specifically designed to be used with ThermoFlo flexible ducting.
• Size: 12 x 12 x 12 inches (30 x 30 x 30 centimeters).

• Allows multiple ventilation areas to be accessed by a single inline-fan source or for several fans to join a single exhaust.
• The "T" shape makes it ideal for right-angle joins in large spaces.
• Made with heavy-duty galvanized steel and powder coated white.
• Specifically designed to be used with ThermoFlo flexible ducting.
• Size: 6 x 6 x 6 inches (15 x 15 x 15 centimeters).

• Allows multiple ventilation areas to be accessed by a single inline-fan source or for several fans to join a single exhaust.
• The "T" shape makes it ideal for right-angle joins in large spaces.
• Made with heavy-duty galvanized steel and powder coated white.
• Specifically designed to be used with ThermoFlo flexible ducting.
• Size: 8 x 8 x 8 inches (20 x 20 x 20 centimeters).

• Allows multiple ventilation areas to be accessed by a single inline-fan source or for several fans to join a single exhaust.
• The “Y” shape makes it useful in areas with tight access angles.
• Made with heavy-duty galvanized steel and powder coated white.
• Specifically designed to be used with ThermoFlo flexible ducting.
• Size: 10 x 10 x 10 inches (25 x 25 x 25 centimeters).

• Allows multiple ventilation areas to be accessed by a single inline-fan source or for several fans to join a single exhaust.
• The “Y” shape makes it useful in areas with tight access angles.
• Made with heavy-duty galvanized steel and powder coated white.
• Specifically designed to be used with ThermoFlo flexible ducting.
• Size: 10 x 8 x 8 inches (25 x 20 x 20 centimeters).