Grow Tents, Systems & Trays

The flange is used to connect the Can-Filter® to the ducting or Can-Fan®; this is for airflow out of the ventilated area. These spun steel flanges come with a foam rubber seal and 6 hex drive self-tapping screws forming a perfect seal with Can-Filter products. Flanges range in size from 4 in to 20 in depending on your specific needs.

Very low air resistance, easily changed. MERV-5 mesh blocks pollen, dust and other particulate from entering filter. Available in sizes for all filters. A clean Can-Filter® Pre-Filter is an excellent way of extending the working life of your Can-Filter filter.

Very low air resistance, easily changed. MERV-5 mesh blocks pollen, dust and other particulate from entering filter. Available in sizes for all filters. A clean Can-Filter® Pre-Filter is an excellent way of extending the working life of your Can-Filter filter.

Very low air resistance, easily changed. MERV-5 mesh blocks pollen, dust and other particulate from entering filter. Available in sizes for all filters. A clean Can-Filter® Pre-Filter is an excellent way of extending the working life of your Can-Filter filter.

Can-Filters® has designed and built the Can-Lite™ for convenience and long life. 100% Australian granulated carbon, aluminum top and bottom, integrated flange and 51% open perforation are features of the Can-Lite filter. The Can-Lite is available in 7 sizes with a CFM range of 89 to 3000. Can-Lite is manufactured in a dedicated carbon filter plant in North America. Each filter is shrink wrapped, boxed and labeled for ease of use.

Can-Filters® has designed and built the Can-Lite™ for convenience and long life. 100% Australian granulated carbon, aluminum top and bottom, integrated flange and 51% open perforation are features of the Can-Lite filter. The Can-Lite is available in 7 sizes with a CFM range of 89 to 3000. Can-Lite is manufactured in a dedicated carbon filter plant in North America. Each filter is shrink wrapped, boxed and labeled for ease of use.

Can-Filters® has designed and built the Can-Lite™ for convenience and long life. 100% Australian granulated carbon, aluminum top and bottom, integrated flange and 51% open perforation are features of the Can-Lite filter. The Can-Lite is available in 7 sizes with a CFM range of 89 to 3000. Can-Lite is manufactured in a dedicated carbon filter plant in North America. Each filter is shrink wrapped, boxed and labeled for ease of use.

Can-Filters® has designed and built the Can-Lite™ for convenience and long life. 100% Australian granulated carbon, aluminum top and bottom, integrated flange and 51% open perforation are features of the Can-Lite filter. The Can-Lite is available in 7 sizes with a CFM range of 89 to 3000. Can-Lite is manufactured in a dedicated carbon filter plant in North America. Each filter is shrink wrapped, boxed and labeled for ease of use.

Can-Filters® has designed and built the Can-Lite™ for convenience and long life. 100% Australian granulated carbon, aluminum top and bottom, integrated flange and 51% open perforation are features of the Can-Lite filter. The Can-Lite is available in 7 sizes with a CFM range of 89 to 3000. Can-Lite is manufactured in a dedicated carbon filter plant in North America. Each filter is shrink wrapped, boxed and labeled for ease of use.

Can-Filters® has designed and built the Can-Lite™ for convenience and long life. 100% Australian granulated carbon, aluminum top and bottom, integrated flange and 51% open perforation are features of the Can-Lite filter. The Can-Lite is available in 7 sizes with a CFM range of 89 to 3000. Can-Lite is manufactured in a dedicated carbon filter plant in North America. Each filter is shrink wrapped, boxed and labeled for ease of use.

Can-Filters® has designed and built the Can-Lite™ for convenience and long life. 100% Australian granulated carbon, aluminum top and bottom, integrated flange and 51% open perforation are features of the Can-Lite filter. The Can-Lite is available in 7 sizes with a CFM range of 89 to 3000. Can-Lite is manufactured in a dedicated carbon filter plant in North America. Each filter is shrink wrapped, boxed and labeled for ease of use.

Can-Filters® has designed and built the Can-Lite™ for convenience and long life. 100% Australian granulated carbon, aluminum top and bottom, integrated flange and 51% open perforation are features of the Can-Lite filter. The Can-Lite is available in 7 sizes with a CFM range of 89 to 3000. Can-Lite is manufactured in a dedicated carbon filter plant in North America. Each filter is shrink wrapped, boxed and labeled for ease of use.

Quick maintenance with easy filter access that is removable and washable. Low temperature defrosting. Easy to move with built-in handles and wheels. Easy-to-use LED display panel. Removable water tank with an automatic shutoff when reservoir is full. The reservoir for the dehumidifiers is 6 liters or 12.5 pints. 22 pint is 4.0 Amps/420 W. 30 pint is 4.7 Amps/520 W. 50 Pint is 6.9 Amps/720 W. 115 V. Can be plumbed for permanent drainage.

Ideal-Air™ Pro Series 60 Pint Dehumidifier has automatic restart if power is lost. Easy-to-use digital display humidity readings, internal condensate pump, removable washable filter, 1 speed fan motor, powder-coated metal casing for long life and a heavy-duty compressor. Built-in defrost that is designed for operation down to 41°F. Set upright on their feet for 3 hrs prior to use. 60 pint unit: Temp. Range: 41°F–95°F, condensation removal: (24 hrs) 60 pints (86°F, 80% RH); Power: 4.6 Amps/520 W; Supply Voltage: 115 V - 1 Phase - 60 Hz; R410A. Ideal-Air™ recommends that dehumidifiers use surge protectors and a dedicated electrical circuit. In the event of a power failure, a spike in voltage may occur when the power is reinstated. This can damage the circuit board, which is not covered under warranty.

The Eos® Complete Digital Humidity Controller allows you to accurately and efficiently control the humidity levels in your garden. Set your desired humidity level and the controller will activate and deactivate humidifying and dehumidifying equipment appropriately. This controller also features low temperature protection in the event that achieving the desired humidity level results in an undesirable temperature. This Eos® unit features a 15 ft remote sensor that monitors your temperature and humidity levels. The easy-to-use analog style interface makes programming the controller a simple task. Day and night settings allow for accurate environmental control.

The Eos® 2 Digital Humidity Controller makes dialing in your room's environment a breeze. It can be used to activate a device to increase humidity in your room or decrease the humidity in your room. The Eos® 2 utilizes a high-quality humidity sensor as well as a photocell for day and night control. Settings are easily programmed with the knob that doubles as a button to change settings. A slide switch controls whether the controller is running in Day, Night or 24 hr mode. 10 Amps/ 120 V/ 60 Hz.

Temperature control range is 55°F to 95°F. Controls cooling or heating equipment. Day and night settings keep temperature within 4°F of set point. 6 ft temperature probe is accurate to within 2°F. Enclosure protects internal components from dust, rust and moisture. ETL listed for commercial applications. 15 Amps/ 120 V/ 60 Hz.

Controller turns off your lights if high temperature exceeds set point. Built-in 1 to 30 min hot start delay with HOLD feature. 6 foot temperature probe is accurate to within 2°F. Protects your garden and your plants. Enclosure resists dust, rust and moisture. 15 Amps maximum/ 120 V/ 60 Hz.

This CO₂ Rain® System includes 25 ft of laser-drilled 1/8 in tubing, 6 eye hooks, 1/8 in plastic T fitting and instructions. Additional 100 ft roll of tubing is also available.

Replacement parts for Titan Controls® CO₂ Regulators. The white plastic washers are replacements for the Titan CO₂ Regulator.

This CO₂ Rain® System includes 25 ft of laser-drilled 1/8 in tubing, 6 eye hooks, 1/8 in plastic T fitting and instructions. Additional 100 ft roll of tubing is also available.

Botanicare® Original Grow Trays are durable, customizable grow trays made from heavy-gauge ABS that resist bowing, cracking and leaking, so you can grow with confidence. The sidewalls on these versatile hydroponic grow trays are 4.5 inches high, providing more flexibility and making them ideal for drip, ebb and flow, or lettuce raft growing. Choose between 4- or 5-foot widths, and extend the length from 10-foot 6 inch to 100-foot 6 inch in 5-foot increments, to best suit your greenhouse or other growing space. A drain screen with 3 punch outs make access to plumbing lines easy. Sealant yields 16.75 feet of seams (4 ft - 3.7 seams, 5 ft - 3 seams).

Botanicare® Original Grow Trays are durable, customizable grow trays made from heavy-gauge ABS that resist bowing, cracking and leaking, so you can grow with confidence. The sidewalls on these versatile hydroponic grow trays are 4.5 inches high, providing more flexibility and making them ideal for drip, ebb and flow, or lettuce raft growing. Choose between 4- or 5-foot widths, and extend the length from 10-foot 6 inch to 100-foot 6 inch in 5-foot increments, to best suit your greenhouse or other growing space. A drain screen with 3 punch outs make access to plumbing lines easy. Sealant yields 16.75 feet of seams (4 ft - 3.7 seams, 5 ft - 3 seams).

Botanicare® Original Grow Trays are durable, customizable grow trays made from heavy-gauge ABS that resist bowing, cracking and leaking, so you can grow with confidence. The sidewalls on these versatile hydroponic grow trays are 4.5 inches high, providing more flexibility and making them ideal for drip, ebb and flow, or lettuce raft growing. Choose between 4- or 5-foot widths, and extend the length from 10-foot 6 inch to 100-foot 6 inch in 5-foot increments, to best suit your greenhouse or other growing space. A drain screen with 3 punch outs make access to plumbing lines easy. Sealant yields 16.75 feet of seams (4 ft - 3.7 seams, 5 ft - 3 seams).

These 4 in legs reduce the overall height of the Fast Fit® Rolling Bench Tray Stand 4 ft x 8 ft (#706113) from 27.25 in to 13.125 in. Screw pack included.