Grow Tents, Systems & Trays

Controls and monitors CO₂ from 0 to 2,000 parts per million (PPM). CO₂ enrichment or CO₂ exhaust features. Easy to setup and operate. Enclosure resists dust, rust and moisture. 5 Amps maximum/120 V/ 60 Hz.

Compact and easy-to-use, the Atlas® 9 is a grower's dream. The 15 ft remote sensor allows you to measure the CO₂ levels of your garden exactly where you need to measure them. Fuzzy logic capabilities allow you to accurately dose CO₂when using a CO₂ regulator. The knob that doubles as a button when pushed lets you easily program this product. Enclosure resists dust, rust and moisture. 10 Amps maximum/120 V/ 60 Hz.

Atlas® 1 CO₂ Monitor/Controller comes with a 25 ft remote sensor. It features adjustable set point and elevation levels, a built-in self calibration function and an integrated photocell that enables operation in daytime hours only, when the plants need CO₂. Simple to use and easy to operate. 15 Amps/120 V/ 60 Hz., The sensor comes factory calibrated for precise CO₂ readings and utilizes low voltage technology.

Preset CO₂ control at 1,500 PPM. Built-in self-calibration feature. Easiest to use CO₂ controller on the market. Simply plug in your CO₂ generator or regulator and you are ready to go. Built-in photocell allows CO₂ enrichment only during daylight hours. Durable powder-coated steel enclosure. 15 Amps maximum/120 V/ 60 Hz. Patent No. D657 748.

CO₂ is scientifically proven to improve the performance of plants! The Ares® Series CO₂ generators provide a clean and efficient way to enrich your grow area with CO₂. Ares® Series CO₂ generators come with everything you need to get your CO₂ system started. Includes: CO₂ generator, AC power supply, hanging chain, ceiling hook, appropriate hose and regulator. All you need to provide is a gas source! 1.5 Amps/120 V/ 60 Hz.

CO₂ is scientifically proven to improve the performance of plants! The Ares® Series CO₂ generators provide a clean and efficient way to enrich your grow area with CO₂. Ares® Series CO₂ generators come with everything you need to get your CO₂ system started. Includes: CO₂ generator, AC power supply, hanging chain, ceiling hook, appropriate hose and regulator. All you need to provide is a gas source! 1.5 Amps/120 V/ 60 Hz.

CO₂ is scientifically proven to improve the performance of plants! The Ares® Series CO₂ generators provide a clean and efficient way to enrich your grow area with CO₂. Ares® Series CO₂ generators come with everything you need to get your CO₂ system started. Includes: CO₂ generator, AC power supply, hanging chain, ceiling hook, appropriate hose and regulator. All you need to provide is a gas source! 1.5 Amps/120 V/ 60 Hz.

CO₂ is scientifically proven to improve the performance of plants! The Ares® Series CO₂ generators provide a clean and efficient way to enrich your grow area with CO₂. Ares® Series CO₂ generators come with everything you need to get your CO₂ system started. Includes: CO₂ generator, AC power supply, hanging chain, ceiling hook, appropriate hose and regulator. All you need to provide is a gas source! 1.5 Amps/120 V/ 60 Hz.

CO₂ is scientifically proven to improve the performance of plants! The Ares® Series CO₂ generators provide a clean and efficient way to enrich your grow area with CO₂. Ares® Series CO₂ generators come with everything you need to get your CO₂ system started. Includes: CO₂ generator, AC power supply, hanging chain, ceiling hook, appropriate hose and regulator. All you need to provide is a gas source! 1.5 Amps/120 V/ 60 Hz.

CO₂ is scientifically proven to improve the performance of plants! The Ares® Series CO₂ generators provide a clean and efficient way to enrich your grow area with CO₂. Ares® Series CO₂ generators come with everything you need to get your CO₂ system started. Includes: CO₂ generator, AC power supply, hanging chain, ceiling hook, appropriate hose and regulator. All you need to provide is a gas source! 1.5 Amps/120 V/ 60 Hz.

The Apollo® 6 - 24 hr timer is the perfect timing solution for your hydro systems. With a 12 Amp capacity, it's easy to set to run your pumps, fans, etc. The Apollo® 6 has 96 non-detachable 15 min trippers and can be configured in numerous timing schedules to meet the most demanding timing requirements. One (1) outlet. 15 min intervals. Heavy-duty construction. Easy to use and simple to operate. Enclosure resists dust, rust and moisture. 12 Amps maximum/120 V/60 Hz.

The Apollo® 7 - 24 hr digital timer is the perfect timing solution for your hydro systems. With a 15 Amp capacity, it's easy to set to run your pumps, fans, etc. The Apollo® 7 may be set to 1 min intervals and run 8 separate schedules per day. Can be configured in numerous timing schedules to meet the most demanding timing requirements. One (1) outlet with 1 min intervals. Battery backup feature saves settings if power goes out. Enclosure resists dust, rust and moisture. 15 Amps maximum/120 V/60 Hz. HINT: If not working properly, plug in for 5 min and press the reset button. Generally this fixes the problem.

The Apollo® 8 - 24 hr timer is the perfect timing solution for your hydro systems. With two outlets and a 15 Amp capacity, it's easy to set to run your pumps, fans, etc. The Apollo® 8 has 96 non-detachable 15 min trippers and can be configured in numerous timing schedules to meet the most demanding timing requirements. Two (2) outlets. 15 min intervals. Heavy-duty construction. Easy to use and simple to operate. Enclosure resists dust, rust and moisture. Do not use with digital ballasts. 15 Amps maximum/120 V/60 Hz.

• Easily reduce or increase duct diameter to suit requirements.
• Made with heavy-duty galvanized steel.
• Powder coated white.
• Designed for use with ThermoFlo™ flexible ducting.
• Size: 6 inches to 4 inches (15 to 10 centimeters).

• Easily reduce or increase duct diameter to suit requirements.
• Made with heavy-duty galvanized steel.
• Powder coated white.
• Designed for use with ThermoFlo™ flexible ducting.
• Size: 6 inches to 5 inches (15 to 13 centimeters).

• Easily reduce or increase duct diameter to suit requirements.
• Made with heavy-duty galvanized steel.
• Powder coated white.
• Designed for use with ThermoFlo™ flexible ducting.
• Size: 8 inches to 4 inches (20 to 10 centimeters).

• Easily reduce or increase duct diameter to suit requirements.
• Made with heavy-duty galvanized steel.
• Powder coated white.
• Designed for use with ThermoFlo™ flexible ducting.
• Size: 8 inches to 6 inches (20 to 15 centimeters).

• Easily reduce or increase duct diameter to suit requirements.
• Made with heavy-duty galvanized steel.
• Powder coated white.
• Designed for use with ThermoFlo™ flexible ducting.
• Size: 10 inches to 6 inches (25 to 15 centimeters).

• Easily reduce or increase duct diameter to suit requirements.
• Made with heavy-duty galvanized steel.
• Powder coated white.
• Designed for use with ThermoFlo™ flexible ducting.
• Size: 10 inches to 8 inches (25 to 20 centimeters).

• Easily reduce or increase duct diameter to suit requirements.
• Made with heavy-duty galvanized steel.
• Powder coated white.
• Designed for use with ThermoFlo™ flexible ducting.
• Size: 12 inches to 8 inches (30 to 20 centimeters).

• Easily reduce or increase duct diameter to suit requirements.
• Made with heavy-duty galvanized steel.
• Powder coated white.
• Designed for use with ThermoFlo™ flexible ducting.
• Size: 12 inches to 10 inches (30 to 25 centimeters).

• Easily reduce or increase duct diameter to suit requirements.
• Made with heavy-duty galvanized steel.
• Powder coated white.
• Designed for use with ThermoFlo™ flexible ducting.
• Size: 14 inches to 10 inches (38 to 25 centimeters).

• Allows multiple ventilation areas to be accessed by a single inline-fan source or for several fans to join a single exhaust.
• The "T" shape makes it ideal for right-angle joins in large spaces.
• Made with heavy-duty galvanized steel and powder coated white.
• Specifically designed to be used with ThermoFlo flexible ducting.
• Size: 4 x 4 x 4 inches (10 x 10 x 10 centimeters).

• Allows multiple ventilation areas to be accessed by a single inline-fan source or for several fans to join a single exhaust.
• The "T" shape makes it ideal for right-angle joins in large spaces.
• Made with heavy-duty galvanized steel and powder coated white.
• Specifically designed to be used with ThermoFlo flexible ducting.
• Size: 6 x 6 x 6 inches (15 x 15 x 15 centimeters).