Growing Environment

The Max-Fan® is the first fan that has been developed with a Computational Fluid Dynamics (CFD) program. CFDs are used for engineering aircraft propulsion engines. The perfectly designed 3D blades of the impeller and stator make this fan extremely powerful and energy efficient. Compared with other inline fans, the efficiency is 50% to 100% higher. 6 inch to 14 inch come pre-wired with an 8 foot 120 V power cord. Can-Fan® bring its innovation to market and sets a new standard for performance. The Max-Fan is a more powerful and efficient fan that takes less energy to run.

• Designed to allow airflow in one direction.
• Minimum air leakage: exterior foam gaskets assure a tight seal.
• Aluminum spring-loaded backdraft damper blades.
• 20 gauge steel housing.
• Simple installation: entire assembly inserts into duct.
• Can be installed in any position: designed for vertical or horizontal mount.
• Specifically designed for use with ThermoFlo™ flexible ducting.
• Size: 10 inches (25 centimeters).

Can-Filters® has designed and built the Can-Lite™ for convenience and long life. 100% Australian granulated carbon, aluminum top and bottom, integrated flange and 51% open perforation are features of the Can-Lite filter. The Can-Lite is available in 7 sizes with a CFM range of 89 to 3000. Can-Lite is manufactured in a dedicated carbon filter plant in North America. Each filter is shrink wrapped, boxed and labeled for ease of use.

Can-Filters® has designed and built the Can-Lite™ for convenience and long life. 100% Australian granulated carbon, aluminum top and bottom, integrated flange and 51% open perforation are features of the Can-Lite filter. The Can-Lite is available in 7 sizes with a CFM range of 89 to 3000. Can-Lite is manufactured in a dedicated carbon filter plant in North America. Each filter is shrink wrapped, boxed and labeled for ease of use.

• Adjustable hanging cable with mounting hooks.
• 10 ft (3.05 m) power cable (PoE 802.11AF).

• Delivers precise PAR (Photosynthetically Active Radiation) measurements.
• Suitable for all light sources, including modern LED technologies.
• Exclusive design for seamless integration with the AROYA platform.
• Measures wavelengths within a 400 to 700 nm ± 5 nm spectral range.
• Provides accurate readings crucial for crop management practices.
• Supports advanced data analysis and crop steering.
• Enhances light management for improved yield and quality.
• Ensures precision in light measurement across diverse cultivation setups.
• Compatible with AROYA GO for a complete cultivation toolkit.
• Aids in better decision-making through enhanced data analytics.

Accessory Kit (CE Version) for AROYA Gateway H211

• Designed to allow airflow in one direction.
• Minimum air leakage: exterior foam gaskets assure a tight seal.
• Aluminum spring-loaded backdraft damper blades.
• 20 gauge steel housing.
• Simple installation: entire assembly inserts into duct.
• Can be installed in any position: designed for vertical or horizontal mount.
• Specifically designed for use with ThermoFlo™ flexible ducting.
• Size: 12 inches (30 centimeters).

• Ensures precise alignment of AROYA moisture sensors.
• Optimizes sensor contact with the substrate.
• Facilitates easy and error-free installation.
• Mitigates substrate inconsistencies for accurate readings.
• Enhances data accuracy for better grow insights.
• Built with durable materials for long-term reliability.
• Recommended for use with three sensors per strain per 1,000 sq. ft.
• Helps maintain consistent sensor performance with regular monitoring.
• Ideal for fresh installations to avoid pre-existing substrate issues.
• Compatible exclusively with AROYA moisture sensors.

Ideal-Air™ Pro Series 100 Pint Dehumidifier has automatic restart if power is lost. Easy-to-use digital display humidity readings, internal condensate pump, removable washable filter, 1 speed fan motor, powder-coated metal casing for long life and a heavy-duty compressor. Built-in defrost that is designed for operation down to 41°F. Set upright on their feet for 3 hrs prior to use. 100 pint unit: Temp. Range: 41°F–95°F, condensation removal: (24 hrs) 100 pints (86°F, 80% RH); Power: 6.75 Amps/728 W; Supply Voltage: 115 V - 1 Phase - 60 Hz; R410A. Ideal-Air recommends that dehumidifiers use surge protectors and a dedicated electrical circuit. In the event of a power failure, a spike in voltage may occur when the power is reinstated. This can damage the circuit board, which is not covered under warranty.

• A high-airflow exhaust fan designed to ventilate out heat, moisture, odor, and dust from various spaces.
• Programmable controller with corded probe, can adjust fan speeds in response to temperatures and humidity.
• Innovative EC-motor with PWM-control maximizes airflow while reducing energy consumption and noise levels.
• Features galvanized-steel shutters, aluminum blades, and IP-44 rated to be highly resistant to liquid and dust.
• Fan Size: 12 in.
• Dimensions: 15.75 x 15.75 x 8.14 in.
• Airflow: 830 CFM.
• Noise: 62 dBA.
• Bearings: Dual Ball.

• A high-airflow exhaust fan designed to ventilate out heat, moisture, odor, and dust from various spaces.
• Programmable controller with corded probe, can adjust fan speeds in response to temperatures and humidity.
• Innovative EC-motor with PWM-control maximizes airflow while reducing energy consumption and noise levels.
• Features galvanized-steel shutters, aluminum blades, and IP-44 rated to be highly resistant to liquid and dust.
• Fan Size: 14 in.
• Dimensions: 16.93 x 16.93 x 6.42 in.
• Airflow: 2,418 CFM.
• Noise: 68 dBA.
• Bearings: Dual Ball.

• Engineered for Heavy Moisture Loads: Ideal for commercial spaces like indoor agriculture and water treatment facilities.
• Advanced Filtration & Efficiency: Features MERV-13 filtration and filter compensation technology to maintain consistent airflow and energy efficiency.
• Patented M-CoRR Technology: Recycles excess heat for high efficiency, pulling 345 pints of water per day at 80°F and 60% relative humidity.

@ 80°F | 60% RH

• Capacity: 345 Pints/Day.
• Efficiency: 8.0 Pints/kWh.
• Supply Voltage: 208-230 V.
• Current Draw: 8.4A @ 208 V / 7.6A @ 230 V.

• For use with Ona Mist aerosol cans.
• Controls difficult or repetitive odors in small spaces.
• Has an electronic eye that senses bright light or low light.
• Three settings for low light, day light, or 24-hour operation.
• Adjustable time intervals: 7.5 minutes, 15 minutes, or 30 minutes.

• May be mounted on the exterior of a building.
• Enclosed motor housing for dust and lint.
• Suitable for air temperatures up to 140°F / 60°C.
• Energy efficient; speed controllable (optional solid state speed control).
• Heavy gauge, galvanized steel housing with baked epoxy finish; rugged construction for long life.
• Built-in backdraft damper.
• Exceptionally quiet and efficient BC centrifugal motorized impeller.
• External rotor motor design results in superior motor cooling and durability.
• Permanently lubricated ball bearing motor for maintenance-free operation.
• Automatic reset thermal overload protection.
• Fan and motor are precision balanced for quiet and vibration-free operation.
• Pre-wired capacitor.
• 120 V operation.
• 4 in (10 cm) 177 CFM external mount duct fan.

• Designed for efficient air circulation in compact spaces.
• Ideal for growrooms, greenhouses, homes, garages, workshops, and more.
• Three dial- or pull-cord controlled speed settings.
• Multi-position tilt.
• 90 degree lockable oscillation.
• Powder-coated steel grill.
• Chemical-resistant polypropylene fan blade.
• cETL listed.
• 18 inch (45 centimeter) fan.

• Easily suspends your Quest 100 dehumidifier.
• Frees up valuable floor space.

The Max-Fan® Pro Series is even more efficient and stronger than the original Max-Fan design. The Max-Fan Pro Series has a much more robust housing due to the fiberglass reinforced plastic compounds that meet all of the UL and CSA requirements. The fans have three control speeds for true performance. These fans run quieter than the Max-Fan. The fans come with the EZ Mount™ bracket for easy mounting.

Each Original Can-Filter® uses the most conceptually sound, granular carbon, packed-bed design to deliver the best performing carbon filter on the market. Even with the industry's thickest carbon bed, at 2.5 inches, the Can Original provides for some of the lowest pressure drops, even on smaller size filters. This hefty granular carbon bed effectively makes the Original filter the biggest sponge for VOC removal capable of holding massive amounts of contaminant leading to a lifespan that leaves other filters, frankly, in the dust. The Original Can-Filter are designed for the control of VOCs (paint fumes, hydrocarbons, etc...), odors and other gaseous contaminants. Built with the same proven packed bed design and granular virgin activated carbon we've used for 30 years, this line of time tested activated carbon air filters sets the standard for long life, consistent performance and low pressure drop. Rated at a conservative 0.1 sec contact time, the Original Can-Filter provide excellent value and confidence.

Duct Kit for Quest 335 and 335 277 V.

Compatible Products:

• Quest 335 [4042500].
• Quest 335 277 V [4042600].

Very low air resistance, easily changed. MERV-5 mesh blocks pollen, dust and other particulate from entering filter. Available in sizes for all filters. A clean Can-Filter® Pre-Filter is an excellent way of extending the working life of your Can-Filter filter.

Can-Filters® has designed and built the Can-Lite™ for convenience and long life. 100% Australian granulated carbon, aluminum top and bottom, integrated flange and 51% open perforation are features of the Can-Lite filter. The Can-Lite is available in 7 sizes with a CFM range of 89 to 3000. Can-Lite is manufactured in a dedicated carbon filter plant in North America. Each filter is shrink wrapped, boxed and labeled for ease of use.

Quick maintenance with easy filter access that is removable and washable. Low temperature defrosting. Easy to move with built-in handles and wheels. Features a LED display panel. Removable water tank with an automatic shutoff when reservoir is full. Internal condensate pump for easy water disposal. Can also be plumbed for permanent drainage. Tank reservoir capacity is 10 liters or 21 pints. 7 Amps/680 W/271 CFM. 115 V.

• Monitors water content, electrical conductivity, and temperature.
• Features Bluetooth for wireless data transfer and real-time monitoring.
• Includes the TEROS 12 Substrate Sensor for precise environmental data.
• Enhances cultivation efficiency through advanced substrate monitoring.
• Wirelessly transmits data to the SOLUS and AROYA mobile apps.
• Compact design for easy installation and integration.
• Requires AROYA Core subscription for full app functionality.
• Comes with Bluetooth dongle, two AA batteries, and alignment tool.

• Superior MERV13 filtration removes harmful contaminants like dust, pollen, mold, bacteria, and some viruses.
• Helps prevent cross-contamination and unhealthy conditions.
• Essential for maintaining safer air quality in your environment.
• Protects internal components of Quest dehumidifiers ensuring long-lasting performance and equipment durability.
• Size: 12 x 14 x 1 inches (30.48 x 35.56 x 2.54 cm).
• Compatible Products: Quest 100 Dehumidifier [4032270].