Netafim

View as Grid List
Sort by
Q100708.jpg

Netafim™ Single Drip Stake Assemblies

P_00383
  • Installs directly where needed for precise irrigation.
  • Reduces setup time considerably.
  • Features a 0.3 or 0.5 GPH pressure-compensating emitter with CNL check valve.
  • Includes 18, 30, 36, or 48 in (46, 76, 91, or 122 cm) of Super Flex Tubing.
  • Comes with an angled barbed stake for secure placement.
  • Requires a minimum operating pressure of 10 psi.
Q102468.jpg

Netafim™ 1 Inch Wide Range Pressure Regulators

P_00384
  • The only 1-inch regulator in the industry rated from 0.5 to 35 GPM.
  • Constructed with high-strength ABS and stainless steel springs for long-lasting durability.
  • Features a rolling diaphragm and sealed regulating chamber for consistent performance.
  • Suitable for various applications in any irrigation system.
  • Operating inlet pressure range: 30 to 150 PSI.
Q102482.jpg

Netafim™ 17 Millimeter Fittings

P_00385
  • Netafim™ 17 mm Shut-Off Valve
    • Dual 17 mm barbed tubing connectors designed for 17 mm UV Poly Tubing (#Q102449).
    • Can be used as a flush valve or to shut off a table.
  • Netafim™ 17 mm Techline Combination Tee
    • Dual 17 mm barbed tubing connectors designed for 17 mm UV Poly Tubing (#Q102449).
    • Connects to 1/2 inch female pipe thread.
    • Use with the Netafim Liquid Filled Pressure Gauge (#Q102475) to measure water pressure on the table.
Q102454.jpg

Netafim™ 17 Millimeter Techlock Fittings

P_00386
  • Barb ends fit securely on UV Polyethylene Tubing (#Q102449)
  • Techlock threaded caps and compression rings ensure a tight seal
  • Operating pressure range: 0 to 100 psi
Q102464.jpg

Netafim™ 2-Way Flat Multi-Outlet Drippers (MOD) with Angle Arrow Drippers

P_00387
  • Multi-Outlet Dripper (MOD) supports multiple drip stake assemblies from a single drip emitter.
  • Preassembled with a two-way flat manifold, two 36 - or 48-inch UV Polyethylene Tubing leads, and two 6 3/8-inch standard Angle Arrow Drippers.
  • Compatible with the Netafim 1 GPH (Q112854) or 2 GPH (Q102461) Techflow Emitters.
Q102477.jpg

Netafim™ 3/4 Inch Pressure Regulators

P_00388
  • Instantly responds to pressure variations to maintain a constant 35 PSI outlet pressure.
  • Non-corrosive, high-quality plastic bodies withstand commonly used fertilizers and chemicals.
  • Sealed regulating unit with a stainless steel spring and screw for easy maintenance and replacement.
  • Maximum Operating Pressure: 145 PSI.
Q102460.jpg

Netafim™ Self Piercing Pressure Compensating Emitters with Internal Check Valve

P_00389
  • 1.74 psi internal check valve prevents low emitter drainage, holding back up to a 3.9-foot column of water.
  • Reduces the risk of contaminants being drawn into the emitter.
  • Pressure compensating design ensures consistent flow from 10.15 to 58 psi.
  • Exclusive TurboNet® flow path for regulated flow and continuous self-cleaning action.
  • Sharp barb allows for easy installation with no tools required.
Q102480.jpg

Netafim™ Single Spray Stake Assemblies

P_00390
  • Reduces setup time considerably.
  • Available in 36-inch or 48-inch assemblies for flexible installation.
  • Includes a 3.2 or 6.6 GPH pressure-compensating emitter with CNL check valve.
  • Comes with 36 or 48 inches of Super Flex Tubing.
  • Minimum operating pressure: 22 PSI.
  • 3.2 GPH assemblies pair with Netafim single pattern standard spray stakes (#Q102455).
  • 6.6 GPH assemblies pair with Netafim single pattern (#Q102456) or double pattern (#Q102457) standard spray stakes.
Q102457.jpg

Netafim™ Pressure Compensating (PC) Standard Spray Stakes

P_00391
  • Provide consistent water distribution across the entire system.
  • Spray pattern angles downward to ensure water lands on the soil, avoiding contact with the pot's wall.
  • Single-sided spray stake is ideal for placement near the edge of the pot.
  • Alternative option includes Netafim's 'bow-tie' double-spray pattern for different watering needs.
  • Pair with the Netafim 36 inch (#Q102480) or 48 in (#Q102479) single spray stake assembly.
Q102462.jpg

Netafim™ Techflow Emitters with Nipple Outlet

P_00392
  • Unique design regulates flow and provides continuous self-cleaning action.
  • Features a 2.2 PSI internal check valve that prevents low emitter drainage, holding back up to a 5-foot column of water.
  • Anti-siphon operation prevents contaminants from entering the emitter.
  • Pressure compensating, ensuring consistent flow from 14.5 to 58 PSI.
  • Recommended minimum filtration of 120 mesh.
  • Compatible with 36" or 48" 2-way (#Q102463 / #Q102464) or 4-way (#Q112852 / #Q112853) Dripper Stake Assemblies.
Q102450.jpg

Netafim™ UV White™ Polyethylene Tubing

P_00393
  • Excellent ultra-violet (UV) resistance.
  • Reflective and completely opaque to prevent algae growth.
  • Withstands heat, direct sun and harsh chemicals.
  • Produces cooler water temperatures enhancing plant growth.
Q102474.jpg

Netafim™ Woodpecker Pressure Compensating Junior Drippers

P_00394
  • Equipped with a barbed outlet and CNL check valve to prevent low emitter drainage.
  • Anti-siphon operation keeps contaminants from entering the emitter.
  • Pressure compensating design ensures consistent flow from 12 - 58 PSI.
  • Compatible with Netafim Super Flex UV White PE Tubing (#Q100705).
P_00700.jpg

Netafim™ Streamline™ X 630 Series Thinwall Dripline

P_00700
  • The toughest thinwall dripline ever made.
  • Ribs outside the pipe minimize the dripline abrasion during installation.
  • Ribs inside the pipe protect the dripper from damage even in very harsh installations.
  • Seamless construction is stronger and more durable than comparable drip tape.
  • Flap outlet protection impedes soil ingestion and root intrusion.
  • Seasonal or multi-seasonal use, surface or shallow burial.
Q113881.jpg

Netafim™ CNL Dripper Assemblies

P_00710
  • CNL Junior PC drip emitters.
  • 2-litre-per-hour drippers.
  • 24 inch (68.6 centimeter) Superflex white PE tubes.
  • 45° angle spikes.
Q100705.jpg

Netafim Super Flex UV Polyethylene Tubing 1/5" (5 mm) (1,000 ft / 305 m)

Q100705
  • Excellent ultra-violet (UV) resistance.
  • Reflective and completely opaque to prevent algae growth.
  • Withstands heat, direct sun and harsh chemicals.
  • Produces cooler water temperatures enhancing plant growth.
  • Solid opaque white.
  • 1/5 inch (5 mm) polyethylene tubing.
  • 1,000 feet (305 m).
Q100706.jpg

Netafim UV White Polyethylene Tubing 1 in (1.06 in ID x 1.20 in OD) - 100 ft (30 m)

Q100706
  • Excellent ultra-violet (UV) resistance.
  • Reflective and completely opaque to prevent algae growth.
  • Withstands heat, direct sun and harsh chemicals.
  • Produces cooler water temperatures enhancing plant growth.
  • 1 inch polyethylene tubing (1.06 in ID x 1.20 in OD).
  • 100 feet (30 meters).
Q100707.jpg

Netafim 0.5 GPH Single Drip Stake Assembly 36" (91 cm) (25 / pack)

Q100707
  • Installs directly where needed for precise irrigation.
  • Reduces setup time considerably.
  • Features a 0.5 GPH pressure-compensating emitter with CNL check valve.
  • Includes 36 inches (91 cm) of Super Flex Tubing.
  • Comes with an angled barbed stake for secure placement.
  • Requires a minimum operating pressure of 10 psi.
Q100708.jpg

Netafim 0.5 GPH Single Drip Stake Assembly 48" (122 cm) (25 / pack)

Q100708
  • Installs directly where needed for precise irrigation.
  • Reduces setup time considerably.
  • Features a 0.5 GPH pressure-compensating emitter with CNL check valve.
  • Includes 48 inches (122 cm) of Super Flex Tubing.
  • Comes with an angled barbed stake for secure placement.
  • Requires a minimum operating pressure of 10 psi.
Q100709.jpg

Netafim 0.3 GPH Single Drip Stake Assembly 36" (91 cm) (25 / pack)

Q100709
  • Installs directly where needed for precise irrigation.
  • Reduces setup time considerably.
  • Features a 0.3 GPH pressure-compensating emitter with CNL check valve.
  • Includes 36 inches (91 cm) of Super Flex Tubing.
  • Comes with an angled barbed stake for secure placement.
  • Requires a minimum operating pressure of 10 psi.
Q100710.jpg

Netafim 3/4" (2 cm) 80 Globe Valve with Flow Control (26 GPM Max Flow)

Q100710
  • Simple to operate and maintain.
  • Reliable even in harsh conditions.
  • Tight sealing valve with fully supported diaphragm.
  • 3/4 inch flow range is 0.01 - 26 GPM.
Q100711.jpg

Netafim 1" (2.5 cm) 80 Globe Valve with Flow Control (44 GPM Max Flow)

Q100711
  • Simple to operate and maintain.
  • Reliable even in harsh conditions.
  • Tight sealing valve with fully supported diaphragm.
  • 1 inch flow range is 0.01 - 44 GPM.
Q100712.jpg

Netafim Disc Filter 3/4" (2 cm) MPT x MPT 140 Mesh (17 GPM Max Flow)

Q100712
  • Features crisscrossed grooves in disc rings for effective debris trapping.
  • As pressure increases, disc rings compress tightly, forcing water through the grooves.
  • Debris is trapped within the disc rings, ensuring only clean water flows into the irrigation system.
  • Operates efficiently with flow rates from 1 - 12 GPM.
Q100713.jpg

Netafim Angle Barbed Stake (250 / pack)

Q100713
  • Unique flow channel directs water into the container.
  • Pointed end allows for easy insertion into media.
  • Designed for use with Super Flex UV PE Tubing (#Q100705).
Q100714.jpg

Netafim Self Piercing Pressure Compensating Emitters with Check Valve (0.5 GPH), Blue (25 / pack)

Q100714
  • 1.74 psi internal check valve prevents low emitter drainage, holding back up to a 3.9-foot column of water.
  • Reduces the risk of contaminants being drawn into the emitter.
  • Pressure compensating design ensures consistent flow from 10.15 to 58 psi.
  • Exclusive TurboNet® flow path for regulated flow and continuous self-cleaning action.
  • Sharp barb allows for easy installation with no tools required.
Refine
×