Chillers, Heaters & Purification

The Evolution RO1000™ KDF/Catalytic Carbon pre-filter is the standard carbon pre-filter included with system. For chlorine and chloramines reduction for city water. Also for well water for iron hydrogen sulfide and heavy metals reduction. The Evolution RO1000™ Membrane Element is the standard membrane included with system. 2 needed for system.

Removes 98%+ of all contaminants in your tap water. Leading the industry in efficiency, the Stealth has a 2:1 waste to product water ratio. Optional 1:1 ratio flow restrictor saves 50% more waste water. Customized for gardening and hydroponics. The Stealth ROâ„¢ 150 produces 150 GPD of ultra pure water. Includes: 3-stage RO unit, 1 RO membrane, carbon filter, cleanable sediment filter, automatic shut-off cartridge, wall mountable metal bracket, garden hose connector, inline shut-off, 8 ft RO and drain line, 5 ft inlet line, filter wrench and instructions. Membrane Power Flush Kit now included.

Unit size: 15 in x 16 in x 6 in and weight: 10.8 Ib.

Replace membranes when product water decreases and/or ppm increase. Merlin Garden Pro and Evolution RO1000 membranes reduce 94%+ of total dissolved solids. Stealth RO100/200, Stealth RO150/300 and microRO-75 membranes reduces 98%+ of total dissolved solids. The Evolution RO1000 and Merlin Garden Pro systems need two (2) membranes. For all membranes, RO output depends on the source water temperature. At 77°, the system should produce 100% of the rated output. As the temperature drops or increases, so does the output.

For use with source water high in hardness, the Antiscalant kit reduces calcium/magnesium scale accumulatio to extend the life of membranes. It is manufactured to strict HydroLogic quality and performance standards. Replace after 75,000 gallons.

This pump is designed to be installed before the Stealth RO to boost the inlet pressure. Wells and low pressure (below 40 PSI) water sources can benefit greatly from this pump. It boosts the pressure significantly, allowing the Stealth RO to run with higher flow and more efficiency while having better TDS removal. The pump is designed for long service life and runs very quietly. Comes with a high pressure switch and operates at 110V.

• Designed for source water high in hardness.
• Reduces calcium/magnesium scale accumulation.
• Extends the life of membranes.
• Manufactured to strict Hydro-Logic quality standards.
• Replace after processing 75,000 gallons.

The Hydroid is the industry’s premier compact, portable commercial water filter at an affordable price. Achieve up to a 4,500 GPD (gallons of water per day) capacity (blended), or 3,000 GPD pure RO water. Not only is the Hydroid powerful, but it can produce a 2 parts product to 1 part wastewater ratio, making it the most efficient system in its class. New, groundbreaking technology for a compact system with commercial scale performance.

Ensure your Evolution RO1000 runs more efficiently. Helps protect the RO membranes and extends their life. Less filter changes and maintenance - every 7,500 gallons of purified water. Cleanable sediment filter is re-usable. Combination of KDF85 and the KDF55 with eco-friendly catalytic carbon filter reduces chlorine, chloramines, iron, sulfur, and heavy metals. - great for city or well water. Highly recommended when using more than 150 gallons of purified water per week on average.

• 1/2" inlet tubing to Evolution.
• 2 extra stages of filtration prior to the Evolution-RO.
• Extends Evolution-RO Prefilter life (without PreEvolution: 2,000 gallons, with PreEvolution: 7,500 gallons).
• Ensures your Evolution-RO runs more efficiently.

Removes 98%+ of all contaminants in your tap water. Leading the industry in efficiency, the Stealth has a 2:1 waste to product water ratio. Optional 1:1 ratio flow restrictor saves 50% more waste water. Customized for gardening and hydroponics. The Stealth ROâ„¢ 300 produces 300 GPD of ultra pure water. Includes: 3-stage RO unit, 2 RO membranes, carbon filter, cleanable sediment filter, automatic shut-off cartridge, wall mountable metal bracket, garden hose connector, inline shut-off, 8 ft RO and drain line, 5 ft inlet line, filter wrench and instructions. Membrane Power Flush Kit now included.

Unit size: 18.5 in x 16 in x 6 in and weight: 12.5 Ib.

The EcoPlus Chillers are suitable for use in reservoirs, hydroponic systems and fresh or saltwater aquariums. Each chiller provides a high-performance titanium heat exchanger for optimum performance and corrosion resistance. High-quality compressor is extremely efficient and reliable. The micro computer with digital LCD display allows for easy operation. Fittings are 1/2 in. 120 V / 60 Hz / 264 W / 2.2 Amps. Pump Size: Minimum 66 GPH/Maximum 317 GPH. Use with a pump filter bag (product #728188 or #728190). Dimensions are 15.75 in W x 8.58 in D x 16.34 in H and weighs 28.7 lb.

The Hydroid is the industry’s premier compact, portable commercial water filter at an affordable price. Achieve up to a 4,500 GPD (gallons of water per day) capacity (blended), or 3,000 GPD pure RO water. Not only is the Hydroid powerful, but it can produce a 2 parts product to 1 part wastewater ratio, making it the most efficient system in its class. New, groundbreaking technology for a compact system with commercial scale performance.

The Hydroid is the industry’s premier compact, portable commercial water filter at an affordable price. Achieve up to a 4,500 GPD (gallons of water per day) capacity (blended), or 3,000 GPD pure RO water. Not only is the Hydroid powerful, but it can produce a 2 parts product to 1 part wastewater ratio, making it the most efficient system in its class. New, groundbreaking technology for a compact system with commercial scale performance.

The EcoPlus Chillers are suitable for use in reservoirs, hydroponic systems and fresh or saltwater aquariums. Each chiller provides a high-performance titanium heat exchanger for optimum performance and corrosion resistance. High-quality made compressor is extremely efficient and reliable. The micro computer with digital LCD display allows for easy operation. Fittings are 3/4 in. 120 V / 60 Hz / 360 W / 3 Amps. Pump Size: Minimum 264 GPH/Maximum 660 GPH. Use with a pump filter bag (product #728188 or #728190). Dimensions are 17.13 in W x 11.61 in D x 18.5 in H and weighs 42.5 lb.

• 4 x 40 inch, FRP wrapped, low energy, commercial RO membranes.
• Typically used in RO systems with white PVC membrane housings in commercial and industrial series.
• Features genuine, OEM quality, thin film composite (TFC) membrane material for consistent results.
• Effective with tap or brackish water, including in nutrient reclaim systems.
• Made in the USA from an ISO 9001:2015 Certified Facility.
• 100% Quality and Performance Tested.

HyperLogic 4" x 40" FRP Wrapped, Low Energy, Commercial RO Membranes are typically found in our RO systems utilizing the White PVC Membrane Housings; Commercial and Industrial Series. Our genuine, OEM quality, TFC (thin film composite) membrane material delivers consistent, reliable results with tap or brackish water alike, including our Nutrient Reclaim Systems. Periodic membrane cleanings should be performed for consistant operating results. Acidic and Alkaline cleaning chemicals are available for removal of typical fouling such as Calcium Carbonate & Biological growth. Membrane replacement schedule will be diictated based on RO production & performance characteristics. Made in the USA from an ISO 9001:2015 Certified Facility and are 100% Quality and Performance Tested. Formerly HyperLogic HL 11608

• Helps remove calcium carbonate, hardness, iron, and mineral scale build-up from Industrial and Heavy-Industrial Series RO membranes.
• Regular membrane cleaning can extend membrane life, enhance permeate production, and optimize salt rejection.
• Membrane cleaning should be included in your site's SOP (standard operating procedure) for HyperLogic systems.
• Indicators for cleaning include lower permeate flow or reduced salt rejection from the RO.
• 25 lb pail.

HyperLogic Acid (low Ph) Membrane Cleaning Powder is formulated to help remove Calcium Carbonate, Hardness, Iron and mineral scale build-up from our Industrial and Heavy-Industrial Series RO membranes. With a regiment of regular membrane cleaning, membrane life, Permeate production and optimal salt rejection can be achieved. Membrane cleaning procedure should be performed as part of your sites SOP (standard operating procedure) for the HyperLogic systems. Other indicators include RO exhibiting lower Permeate flow or lower salt rejection than normal. Please refer to your RO's Operational Manual or included Instructions for use and handling care details. 25lb. pail. Formerly HyperLogic HL 13560

A work horse pump that will power your Evolution-RO to 80 psi (pump requires a minimum of 20 psi to operate). Heavy duty commercial booster pump designed for continuous use. Includes integrated low pressure and high pressure switches. No Electronic Shutoff Kit required when used in conjunction with the float valve Adjustable pressure dial. Direct 110V plug-in and includes pump protector (inlet filter) and 1/2 quick connect (QC) fittings. This unit does not thermally cycle.

• Achieves longer membrane life, increased permeate production, and optimal salt rejection.
• Cleaning should be part of the site's SOP (standard operating procedure) for HyperLogic systems.
• Indicators for cleaning include lower permeate flow, strong odors, or mold growth on the membrane scroll end.
• 25 lb pail.

With a regiment of regular membrane cleaning, membrane life, Permeate production and optimal salt rejection can be achieved. Membrane cleaning procedure should be performed as part of your sites SOP (standard operating procedure) for the HyperLogic systems. Other indicators include RO exhibiting lower Permeate flow, strong odor or mold growth on the membrane scroll end. Please refer to your RO's Operational Manual or included Instructions for use and handling care details. 25lb. pail. Formerly HyperLogic HL 13561

This system is capable of producing more than 1000 GPD or 42 gallons per hour of pure water. Remove 94%+ of all parts per million from your tap water. Can produce up to 1500 GPD at 80 PSI with an optional booster pump. Save more water by running 2:1 waste to product water ratio, or optional 1:1 ratio (included). Includes custom KDF/catalytic carbon filter for reduction of chlorine, chloramine, iron, sulfur and heavy metals. Simple and quick setup.

Fight warm water problems with an EcoPlus® Water Chiller! Digital control system for accurate, stable water temperature that helps to keep your reservoir cool. Environmentally safe, freon-free R134a refrigeration system that has high energy efficiency. Will chill the water from 37° to 90°. Anticorrosive, pure titanium evaporator. Includes overcurrent protection system and memory protection. Max water volume of 132 gallons. Recommended pump size 317 to 793 GPH. Includes plumbing connections of 3/4 in male NPT with hose fittings. 120 V at 4.4 Amps. Dimensions are 21 in W x 15.5 in D x 22 in H and weighs 52 lb.