Extension, Power & Lamp Cords

The Gavita® RS 1900e produces 1900 µmol s-1 PAR and an impressively efficient 3.0 µmol/j and delivers a broad white light with an enhanced blue spectrum, which some studies show may intensify secondary metabolites, such as terpenes and cannabinoids. This powerful, full-spectrum light source is intended for full-term plant growth - from the vegetative stages to higher-light-requiring bloom and finishing stages. Using the Gavita Master EL3 Controller (sold separately), the fixture is dimmable to 10%.

• High light intensity to help produce higher yields.
• Broad white light with enhanced blue spectrum which may intensify terpene and cannabinoid profiles.
• Foldable 8-rail fixture is a breeze to ship, store, and install.
• Dimmable down to 10% with the Gavita EL3 Master controller (sold separately).
• Delivers the highest efficiency of any full spectrum, Gavita LED fixture at an impressive 3.2 µmol/J.
• Premium diodes.
• Broad Range driver to accommodate a larger voltage range of 208 to 480 V.
• IP66 wet rating and ANSI/CAN/UL 8800 compliant.
• Assembled in the USA using foreign components.
• Dimensions: 44.1 in x 43.7 in x 3.3 in (112.0 x 111.0 x 8.4 cm).
• Weight: 33.6 pounds (15.24 kilograms).

• Designed as a direct replacement for HID fixtures, with plug-and-play installation for instant LED conversions.
• Wide, even light distribution indiscernible from HPS light throw, with better uniformity.
• Compact design fits most HPS layouts, reducing the pain when replacing hundreds at a time.
• Broad white light with enhanced blue spectrum which may intensify terpene and cannabinoid profiles.
• Dimmable down to 35% with the Gavita EL3 Master controller (sold separately).
• Delivers 2000 µmol s-1 PAR and an efficient 3.0 µmol/j.
• Premium diodes and drivers.
• Broad Range driver to accommodate a larger voltage range of 208 - 480 V.
• IP65 wet rating and ANSI/CAN/UL 8800 compliant.
• Assembled in the USA using foreign components.
• Weight: 34.5 pounds (15.65 kilograms).

• 2 LED Clone Bars per package.
• Perfect replacement for T5 fluorescent light fixture.
• 60% more efficient, running off 18 watts.
• Tested in nursery applications.
• Color temperature: 9,000° K.
• Delivers 35 µmol/s at an efficient 2.0 µmol/j.120° wide light distribution.
• 18W per strip (0.15 amps on 120V).
• Daisy chain up to 100 strips on a 20 amp circuit.
• Two strips in array per shelf.
• Easy installation with hanging clip and zip tie slot.
• IP66 wet rated; fully waterproof with water-resistant housing and connectors.
• Rated for 54,000 hours.
• Standard 5-year warranty.
• Mounting hardware and 120 V power cord included.

• Feature both male and female ends.
• Connects a ballast and male power cord attached to a socket.
• Gauge: 14/3.
• Length: 1 foot (30 centimeters).
• Voltage: 600 V.

• Increases the distance from the ballast to the reflector.
• Used between a ballast and a male lamp cord.
• Features both male and female ends.
• Gauge: 14/3.
• Length: 1 foot (30 centimeters).
• Voltage: 600 V.

• Feature both male and female ends.
• Connects a ballast and male power cord attached to a socket.
• Gauge: 14/3.
• Length: 1 foot (30 centimeters).
• Voltage: 300 V.

• Increases the distance from the ballast to the reflector.
• Used between a ballast and a male lamp cord.
• Features both male and female ends.
• Gauge: 14/3.
• Length: 1 foot (30 centimeters).
• Voltage: 300 V.

• Increases the distance from the ballast to the reflector.
• Used between a ballast and a male lamp cord.
• Features both male and female ends.
• Gauge: 14/3.
• Length: 10 feet (3 meters).
• Voltage: 600 V.

• Increases the distance from the ballast to the reflector.
• Used between a ballast and a male lamp cord.
• Features both male and female ends.
• Gauge: 14/3.
• Length: 15 feet (4.5 meters).
• Voltage: 600 V.

• Increases the distance from the ballast to the reflector.
• Used between a ballast and a male lamp cord.
• Features both male and female ends.
• Gauge: 14/3.
• Length: 25 feet (7.6 meters).
• Voltage: 600 V.

Fluence Wireless Flex Dimming delivers simplicity, flexibility, and cost savings to your grow operation by replacing dimming cables to each light fixture with wireless control. Wireless Flex Dimming realizes tremendous labor costs savings from reduced installation time, eliminating potential wiring errors. Simply plug a Wireless Flex Dimming Receiver into the dimming port of each Fluence light fixture, install a Wireless Flex Dimming 0-10 V adapter, and connect the 0-10 V dimming control per zone.

Wireless Flex Dimming features qualified Bluetooth mesh technology enabled by SILVAIR that is fully compatible with any 0-10 V dimmer or environmental controllers. Wireless Flex Dimming is easy to configure and enables HPS to LED retrofit growers to add precise dimming control without installing new wiring, maximizing ROI.

Fluence Wireless Flex Dimming delivers simplicity, flexibility, and cost savings to your grow operation by replacing dimming cables to each light fixture with wireless control. Wireless Flex Dimming realizes tremendous labor costs savings from reduced installation time, eliminating potential wiring errors. Simply plug a Wireless Flex Dimming Receiver into the dimming port of each Fluence light fixture, install a Wireless Flex Dimming 0-10 V adapter, and connect the 0-10 V dimming control per zone.

Wireless Flex Dimming features qualified Bluetooth mesh technology enabled by SILVAIR that is fully compatible with any 0-10 V dimmer or environmental controllers. Wireless Flex Dimming is easy to configure and enables HPS to LED retrofit growers to add precise dimming control without installing new wiring, maximizing ROI.