Fans / Ventilation / Ducting

• Compatible with AC/DC brush-type motors up to 15 Amps.
• Three adjustable switch settings: full, variable, and off.
• Variable setting allows adjustable knob to control fan speed.
• Features a 6 ft 120 V power cord.
• Maximum load capacity of 15 Amps.
• Not compatible with soft or slow-start motors.

• A 100-pint dehumidifier designed for small spaces and projects.
• Features M-CoRR technology for maximum energy efficiency, saving you money.
• Equipped with premium MERV-13 filtration for healthier air and better control over your environment.
• Model #4044590 uses environmentally-friendly R454B refrigerant, combining efficiency and sustainability in a compact footprint.

@ 80 °F | 60% RH

• Capacity: 100 Pints/Day.
• Efficiency: 7.5 Pints/kWh.
• Supply Voltage: 110-120 V, 60 Hz.
• Current Draw: 5 Amps.

• High Capacity & Efficiency: The Quest 205 dehumidifier removes 200 pints of water per day using 10 amps, making it more energy-efficient than its predecessors and competitors.
• Innovative Technology: Features M-CoRR™ Technology, which recycles energy during dehumidification, boosting capacity by 30%.
• User-Friendly Design: Includes onboard digital controls, remote connectivity, and easy overhead installation with integrated hang points for space-saving and maintenance convenience.

@ 80°F | 60% RH

• Capacity: 200 Pints/Day
• Efficiency: 7.7 Pints/kWh
• Supply Voltage: 110-120V
• Current Draw: 10.0 Amps

@ 80°F | 60% RH

• Water removal: 730 pints | 345 liters | 91.3 gallons
• Efficiency: 8.3 pints/kWh
• Supply voltage: 480 V, 3 phase, 60 Hz
• Amps: 4.9
• Energy factor: 3.9 L/kWh
• Operating temp: 56°F min – 95°F max
• Air filter: MERV-13 (Qty 2)
• Dimensions (L x W x H): 44.8 x 28.9 x 27.4 in (113.8 x 73.4 x 69.6 cm)

The Max-Fan® Pro Series is even more efficient and stronger than the original Max-Fan design. The Max-Fan Pro Series has a much more robust housing due to the fiberglass reinforced plastic compounds that meet all of the UL and CSA requirements. The fans have three control speeds for true performance. These fans run quieter than the Max-Fan. The fans come with the EZ Mount™ bracket for easy mounting.

• Designed to allow airflow in one direction.
• Minimum air leakage: exterior foam gaskets assure a tight seal.
• Aluminum spring-loaded backdraft damper blades.
• 20 gauge steel housing.
• Simple installation: entire assembly inserts into duct.
• Can be installed in any position: designed for vertical or horizontal mount.
• Specifically designed for use with ThermoFlo™ flexible ducting.
• Size: 10 inches (25 centimeters).

• Designed to allow airflow in one direction.
• Minimum air leakage: exterior foam gaskets assure a tight seal.
• Aluminum spring-loaded backdraft damper blades.
• 20 gauge steel housing.
• Simple installation: entire assembly inserts into duct.
• Can be installed in any position: designed for vertical or horizontal mount.
• Specifically designed for use with ThermoFlo™ flexible ducting.
• Size: 12 inches (30 centimeters).

The Max-Fan® is the first fan that has been developed with a Computational Fluid Dynamics (CFD) program. CFDs are used for engineering aircraft propulsion engines. The perfectly designed 3D blades of the impeller and stator make this fan extremely powerful and energy efficient. Compared with other inline fans, the efficiency is 50% to 100% higher. 6 inch to 14 inch come pre-wired with an 8 foot 120 V power cord. Can-Fan® bring its innovation to market and sets a new standard for performance. The Max-Fan is a more powerful and efficient fan that takes less energy to run.

The Max-Fan® is the first fan that has been developed with a Computational Fluid Dynamics (CFD) program. CFDs are used for engineering aircraft propulsion engines. The perfectly designed 3D blades of the impeller and stator make this fan extremely powerful and energy efficient. Compared with other inline fans, the efficiency is 50% to 100% higher. 6 inch to 14 inch come pre-wired with an 8 foot 120 V power cord. Can-Fan® bring its innovation to market and sets a new standard for performance. The Max-Fan is a more powerful and efficient fan that takes less energy to run.

• Stainless steel clamps for attaching ducting.
• Make for clean and attractive duct connection.
• Simple to use.
• Size: 4 inches (10 centimeters).

• Allows multiple ventilation areas to be accessed by a single inline-fan source or for several fans to join a single exhaust.
• The “Y” shape makes it useful in areas with tight access angles.
• Made with heavy-duty galvanized steel and powder coated white.
• Specifically designed to be used with ThermoFlo flexible ducting.
• Size: 12 x 12 x 12 inches (30 x 30 x 30 centimeters).

• Improves airflow by forming an efficient 90° elbow.
• Saves energy by eliminating kinks and airflow restriction.
• Can be installed on new ducting, or used to retrofit existing flexible ducts.
• Perfect for commercial or residential applications.
• Easy to install, no special tools required.
• Made from 100% recycled materials.
• UL Listed.
• One size fits all 4- to 16-inch (10- to 40-centimeter) flexible ducts.

• Stainless steel clamps for attaching ducting.
• Make for clean and attractive duct connection.
• Simple to use.
• Size: 14 inches (38 centimeters).

• Connects two segments of round duct together.
• Ideal where added stability and sealing is required.
• Required when passing ventilation through a wall.
• Easily installed.
• Crafted with powder-coated heavy-duty galvanized steel.
• Designed for use with ThermoFlo flexible ducting.
• Size: 4 inches (10 centimeters).

• Connects two segments of round duct together.
• Ideal where added stability and sealing is required.
• Required when passing ventilation through a wall.
• Easily installed.
• Crafted with powder-coated heavy-duty galvanized steel.
• Designed for use with ThermoFlo flexible ducting.
• Size: 10 inches (25 centimeters).

• Connects two segments of round duct together.
• Ideal where added stability and sealing is required.
• Required when passing ventilation through a wall.
• Easily installed.
• Crafted with powder-coated heavy-duty galvanized steel.
• Designed for use with ThermoFlo flexible ducting.
• Size: 12 inches (30 centimeters).

• Connects two segments of round duct together.
• Ideal where added stability and sealing is required.
• Required when passing ventilation through a wall.
• Easily installed.
• Crafted with powder-coated heavy-duty galvanized steel.
• Designed for use with ThermoFlo flexible ducting.
• Size: 6 inches (15 centimeters).

• Connects two segments of round duct together.
• Ideal where added stability and sealing is required.
• Required when passing ventilation through a wall.
• Easily installed.
• Crafted with powder-coated heavy-duty galvanized steel.
• Designed for use with ThermoFlo flexible ducting.
• Size: 8 inches (20 centimeters).

• Stainless steel clamps for attaching ducting.
• Make for clean and attractive duct connection.
• Simple to use.
• Size: 10 inches (25 centimeters).

• Stainless steel clamps for attaching ducting.
• Make for clean and attractive duct connection.
• Simple to use.
• Size: 12 inches (30 centimeters).