Fluence

• Early-development, top-lighting solution for commercial cultivation.
• Full-cycle top-lighting solution for home hobbyists.
• Designed for use without CO₂ supplementation at ambient conditions (~400 ppm).
• Light output PPF: 705 ™mol/s.
• Efficacy: 2.40 ™mol/J @ 277 AC.
• AC input power: 294 W @ 277 V AC.
• Certifications: UL 8800, UL 1598 Wet Location, DLC.
• Spectrum: PhysioSpec Indoor™.
• Length: 47 inches (1,194 millimeters).
• Width: 42.8 inches (1,087 millimeters).

• Early-development, top-lighting solution for commercial cultivation.
• Full-cycle top-lighting solution for home hobbyists.
• Designed for use without CO₂ supplementation at ambient conditions (~400 ppm).
• Size: 40 inches (101 centimeters).
• Voltage: 120 to 277 volts.

• Early-development, top-lighting solution for commercial cultivation.
• Full-cycle top-lighting solution for home hobbyists.
• Designed for use without CO₂ supplementation at ambient conditions (~400 ppm).
• Size: 40 inches (101 centimeters).
• Voltage: 347 to 480 volts.

• Early-development, top-lighting solution for commercial cultivation.
• Full-cycle top-lighting solution for home hobbyists.
• Designed for use without CO₂ supplementation at ambient conditions (~400 ppm).
• Spectrum: PhysioSpec Indoor™.
• Length: 47 inches (1,194 millimeters).
• Lightbar only.

• Early-development, top-lighting solution for commercial cultivation.
• Full-cycle top-lighting solution for home hobbyists.
• Designed for use without CO₂ supplementation at ambient conditions (~400 ppm).
• Spectrum: PhysioSpec Indoor™.
• Length: 32.5 inches (826 millimeters).
• Lightbar only.

• A full-cycle top lighting LED solution for high bay growing environments.
• Ideal for greenhouse supplemental lighting or indoor sole-source lighting.
• Builds on previous generation’s performance with nearly a 45% increase in PPF levels and a 18% increase in efficacy.
• Spectrums: PhysioSpec Greenhouse™ or PhysioSpec Indoor™.
• Light Output PPF: 1,700 µmol/s.
• Efficacy: 2.7 µmol/J.
• AC Input Power: 631 W @ 277 V AC.
• AC Input Voltage: 120 - 277V AC, 347 - 480V AC, 50/60 Hz.
• Light Distribution 120°.
• Mounting Height ≥ 18 inches (45.7 centimeters) above canopy.
• Certifications: UL 8800, UL 1598 Wet-Location, DLC.
• Actual dimensions (L x W x H): 46.1 x 2.9 x 3.3 inches (117.2 x 7.4 x 8.3 centimeters).

• A full-cycle top lighting LED solution for high bay growing environments.
• Ideal for greenhouse supplemental lighting or indoor sole-source lighting.
• Builds on previous generation’s performance with nearly a 45% increase in PPF levels and a 18% increase in efficacy.
• Spectrum: PhysioSpec Indoor™.
• Light Output PPF: 1,700 µmol/s.
• Efficacy: 2.7 µmol/J.
• AC Input Power: 631 W @ 277 V AC.
• AC Input Voltage: 120 - 277V AC, 347 - 480V AC, 50/60 Hz.
• Light Distribution 120°.
• Mounting Height ≥ 18 inches (45.7 centimeters) above canopy.
• Certifications: UL 8800, UL 1598 Wet-Location, DLC.
• Actual dimensions (L x W x H): 46.1 x 2.9 x 3.3 inches (117.2 x 7.4 x 8.3 centimeters).

• A full-cycle top lighting LED solution for high bay growing environments.
• Ideal for greenhouse supplemental lighting or indoor sole-source lighting.
• Builds on previous generation’s performance with nearly a 45% increase in PPF levels and a 18% increase in efficacy.
• Spectrum: PhysioSpec Indoor™.
• Light Output PPF: 1,700 µmol/s.
• Efficacy: 2.7 µmol/J.
• AC Input Power: 631 W @ 277 V AC.
• AC Input Voltage: 120 - 277V AC, 347 - 480V AC, 50/60 Hz.
• Light Distribution 120°.
• Mounting Height ≥ 18 inches (45.7 centimeters) above canopy.
• Certifications: UL 8800, UL 1598 Wet-Location, DLC.
• Actual dimensions (L x W x H): 46.1 x 2.9 x 3.3 inches (117.2 x 7.4 x 8.3 centimeters).

• A full-cycle top lighting LED solution for high bay growing environments.
• Ideal for greenhouse supplemental lighting or indoor sole-source lighting.
• Builds on previous generation’s performance with nearly a 45% increase in PPF levels and a 18% increase in efficacy.
• Spectrum: PhysioSpec Indoor™.
• Length: 46.1 inches (117.2 centimeters).
• Lightbar only.

• A full-cycle top lighting LED solution for high bay growing environments.
• Ideal for greenhouse supplemental lighting or indoor sole-source lighting.
• Builds on previous generation’s performance with nearly a 45% increase in PPF levels and a 18% increase in efficacy.
• Spectrum: PhysioSpec Greenhouse™.
• Light Output PPF: 1,700 µmol/s.
• Efficacy: 2.7 µmol/J.
• AC Input Power: 631 W @ 277 V AC.
• AC Input Voltage: 120 - 277V AC, 347 - 480V AC, 50/60 Hz.
• Light Distribution 120°.
• Mounting Height ≥ 18 inches (45.7 centimeters) above canopy.
• Certifications: UL 8800, UL 1598 Wet-Location, DLC.
• Actual dimensions (L x W x H): 46.1 x 2.9 x 3.3 inches (117.2 x 7.4 x 8.3 centimeters).

• A full-cycle top lighting LED solution for high bay growing environments.
• Ideal for greenhouse supplemental lighting or indoor sole-source lighting.
• Builds on previous generation’s performance with nearly a 45% increase in PPF levels and a 18% increase in efficacy.
• Spectrum: PhysioSpec Greenhouse™.
• Light Output PPF: 1,700 µmol/s.
• Efficacy: 2.7 µmol/J.
• AC Input Power: 631 W @ 277 V AC.
• AC Input Voltage: 120 - 277V AC, 347 - 480V AC, 50/60 Hz.
• Light Distribution 120°.
• Mounting Height ≥ 18 inches (45.7 centimeters) above canopy.
• Certifications: UL 8800, UL 1598 Wet-Location, DLC.
• Actual dimensions (L x W x H): 46.1 x 2.9 x 3.3 inches (117.2 x 7.4 x 8.3 centimeters).

• A full-cycle top lighting LED solution for high bay growing environments.
• Ideal for greenhouse supplemental lighting or indoor sole-source lighting.
• Builds on previous generation’s performance with nearly a 45% increase in PPF levels and a 18% increase in efficacy.
• Spectrum: PhysioSpec Indoor™.
• Light Output PPF: 1,700 µmol/s.
• Efficacy: 2.7 µmol/J.
• AC Input Power: 631 W @ 277 V AC.
• AC Input Voltage: 120 - 277V AC, 347 - 480V AC, 50/60 Hz.
• Light Distribution 120°.
• Mounting Height ≥ 18 inches (45.7 centimeters) above canopy.
• Certifications: UL 8800, UL 1598 Wet-Location, DLC.
• Actual dimensions (L x W x H): 46.1 x 2.9 x 3.3 inches (117.2 x 7.4 x 8.3 centimeters).

• The perfect greenhouse or indoor high-ceiling grow light for low DLI crops and operations looking to extend their photoperiod.
• Ideal for close-range deployments to maximize uniformity in low ceiling rooms.
• Spectrums: PhysioSpec Greenhouse™ or PhysioSpec Indoor™.
• Light Output PPF: 900 µmol/s.
• Efficacy: 2.6 µmol/J.
• Light Distribution 120°.
• Mounting Height ≥ 18 inches (45.7 centimeters) above canopy.
• Certifications: UL 8800, UL 1598 Wet-Location Rated, IP66, DLC.
• Actual dimensions (L x W x H): 21.4 x 2.9 x 3.3 inches (61.2 x 7.4 x 8.3 centimeters).

The Fluence VYPR 2x LED is the perfect greenhouse or indoor high-ceiling grow light for low DLI crops and operations looking to extend their photoperiod. Ideal for close-range deployments to maximize uniformity in low ceiling rooms, it emits PPF up to 900 µmol/s and has an energy-efficiency rating of 2.6 µmol/J.

From broad white to high red, Fluence PhysioSpec™ offers BROAD and DUAL spectrum options on VYPR Series. This flexibility prioritizes the grower’s needs in optimizing spectral content and light levels for any crop, at any growth stage, in any geographic location.

With six spectra available, VYPR Series top lights offer higher efficacies (up to 3.8 µmol/J) and higher photosynthetic photon flux (PPF) (up to 2,330 µmol/s) per fixture over comparable lighting technologies.

VYPR is a passively cooled device, relying solely on ambient conditions (and breakthrough engineering) for heat dissipation. VYPR is suitable for operation in still ambient temperatures from -40°C (-40°F) to 40°C (104°F); however, it is recommended at least one ft3/s of airflow to ensure efficient cooling. VYPR 2p has an operating temperature of 50°C (122°F) above ambient.

VYPR is designed as a greenhouse grow light or a sole-source indoor light, it should not be deployed outdoors or in direct sunlight.

The Fluence VYPR 2x LED is the perfect greenhouse or indoor high-ceiling grow light for low DLI crops and operations looking to extend their photoperiod. Ideal for close-range deployments to maximize uniformity in low ceiling rooms, it emits PPF up to 900 µmol/s and has an energy-efficiency rating of 2.6 µmol/J.

From broad white to high red, Fluence PhysioSpec™ offers BROAD and DUAL spectrum options on VYPR Series. This flexibility prioritizes the grower’s needs in optimizing spectral content and light levels for any crop, at any growth stage, in any geographic location.

With six spectra available, VYPR Series top lights offer higher efficacies (up to 3.8 µmol/J) and higher photosynthetic photon flux (PPF) (up to 2,330 µmol/s) per fixture over comparable lighting technologies.

VYPR is a passively cooled device, relying solely on ambient conditions (and breakthrough engineering) for heat dissipation. VYPR is suitable for operation in still ambient temperatures from -40°C (-40°F) to 40°C (104°F); however, it is recommended at least one ft3/s of airflow to ensure efficient cooling. VYPR 2p has an operating temperature of 50°C (122°F) above ambient.

VYPR is designed as a greenhouse grow light or a sole-source indoor light, it should not be deployed outdoors or in direct sunlight.

The Fluence VYPR 2x LED is the perfect greenhouse or indoor high-ceiling grow light for low DLI crops and operations looking to extend their photoperiod. Ideal for close-range deployments to maximize uniformity in low ceiling rooms, it emits PPF up to 900 µmol/s and has an energy-efficiency rating of 2.6 µmol/J.

From broad white to high red, Fluence PhysioSpec™ offers BROAD and DUAL spectrum options on VYPR Series. This flexibility prioritizes the grower’s needs in optimizing spectral content and light levels for any crop, at any growth stage, in any geographic location.

With six spectra available, VYPR Series top lights offer higher efficacies (up to 3.8 µmol/J) and higher photosynthetic photon flux (PPF) (up to 2,330 µmol/s) per fixture over comparable lighting technologies.

VYPR is a passively cooled device, relying solely on ambient conditions (and breakthrough engineering) for heat dissipation. VYPR is suitable for operation in still ambient temperatures from -40°C (-40°F) to 40°C (104°F); however, it is recommended at least one ft3/s of airflow to ensure efficient cooling. VYPR 2p has an operating temperature of 50°C (122°F) above ambient.

VYPR is designed as a greenhouse grow light or a sole-source indoor light, it should not be deployed outdoors or in direct sunlight.

The Fluence VYPR 2x LED is the perfect greenhouse or indoor high-ceiling grow light for low DLI crops and operations looking to extend their photoperiod. Ideal for close-range deployments to maximize uniformity in low ceiling rooms, it emits PPF up to 900 µmol/s and has an energy-efficiency rating of 2.6 µmol/J.

From broad white to high red, Fluence PhysioSpec™ offers BROAD and DUAL spectrum options on VYPR Series. This flexibility prioritizes the grower’s needs in optimizing spectral content and light levels for any crop, at any growth stage, in any geographic location.

With six spectra available, VYPR Series top lights offer higher efficacies (up to 3.8 µmol/J) and higher photosynthetic photon flux (PPF) (up to 2,330 µmol/s) per fixture over comparable lighting technologies.

VYPR is a passively cooled device, relying solely on ambient conditions (and breakthrough engineering) for heat dissipation. VYPR is suitable for operation in still ambient temperatures from -40°C (-40°F) to 40°C (104°F); however, it is recommended at least one ft3/s of airflow to ensure efficient cooling. VYPR 2p has an operating temperature of 50°C (122°F) above ambient.

VYPR is designed as a greenhouse grow light or a sole-source indoor light, it should not be deployed outdoors or in direct sunlight.

The Fluence VYPR 3p offers high fixture PPF up to 2,330 µmol/s and high efficacy up to 3.8 µmol/s, enabling the direct replacement of a 1,000 W HPS fixture at more than 40% energy savings.

An optional reflector kit provides a wider light pattern and uniform PPFD at plant canopy.

The Fluence VYPR 3p offers high fixture PPF up to 2,330 µmol/s and high efficacy up to 3.8 µmol/s, enabling the direct replacement of a 1,000 W HPS fixture at more than 40% energy savings.

An optional reflector kit provides a wider light pattern and uniform PPFD at plant canopy.

The Fluence VYPR 3p offers high fixture PPF up to 2,330 µmol/s and high efficacy up to 3.8 µmol/s, enabling the direct replacement of a 1,000 W HPS fixture at more than 40% energy savings.

An optional reflector kit provides a wider light pattern and uniform PPFD at plant canopy.

The Fluence VYPR 3p offers high fixture PPF up to 2,330 µmol/s and high efficacy up to 3.8 µmol/s, enabling the direct replacement of a 1,000 W HPS fixture at more than 40% energy savings.

An optional reflector kit provides a wider light pattern and uniform PPFD at plant canopy.