Water & Aeration

Dosatron® Water-Powered Nutrient Delivery System Hi-Flo Starter Kit includes all the parts you need for the inlet of your Nutrient Delivery System.

Features: Union, gauge, check valve, elbows, nipples, cross, reducer bushings, hose adapter, ball valve, filter, pressure regulator, seal thread tape.

Dosatron®'s Water-Powered Nutrient Delivery System Mixing Chamber Kit enhances the blending as the solution passes through. It's a must for silicates.

Includes:

• Union.
• Mixing chamber.
• Nipples.
• Seal thread tape.

Dosatron Water-Powered Nutrient Delivery System Hi-Flo Monitor Kit measures and displays the well-blended outgoing solution providing peace of mind.

Includes: unions, close nipples, mixing chamber, nipples, tees, pressure gauge, cross, ball valves, hose adapter, monitor, probe holder assembly, seal thread tape.

• 1 1/2 inch water hammer arrestor kit.
• Normal operating pressure - 35 to 500 psi.
• Spike pressure not to exceed 2,000 psi.

Features: stainless steel water hammer arrestor, 4-inch nipple, tee, elbow, close nipple, union, and a roll of thread seal tape.

Injection seal kit for the Dosatron® D14MZ5 - 14 GPM, D14TMZ5 - 14 GPM, and D40MZ2-40 GPM.

Includes:

• Injection sleeve o-ring.
• Check valve assembly.
• Injection stem o-ring.
• Plunger seal.

Mini maintenance kit for the Dosatron® D40MZ2 - 40 GPM.

Includes:

• Plunger seal.
• Top guide.
• Check valve cone.
• Check valve spring.
• Check valve cone o-ring.
• Dosa-Lube (Silicone).

Injection seal kit for the Dosatron® D40MZ3000 - 40 GPM. Keep your Dosatron in tip-top shape with a yearly maintenance using their seal kit.

Includes:

• Check valve assembly.
• Injection sleeve o-ring.
• Plunger seal.
• Upper injection stem insert o-ring.
• Injection stem o-ring.

Mini maintenance kit for the D40MZ3000 -40 GPM. The Mini Maintenance Kits are the perfect, economical solution for Dosatron® users and growers who perform maintenance on a regular schedule.

Kit Includes:

• Plunger seal
• Upper check valve assembly
• Dosa-Lube (Silicone)

Highly reliable self-priming jet pumps with excellent suction capability that allows the free passage of air bubbles, which can be used for supplying water for domestic and irrigation applications. Built with anti-corrosive and rust-proof materials. Motors with thermic overload protection. Wear-resistant shafts and impellers. Double sealing system between motor and hydraulic part. High resistance to frost and icing. Manual on/off switch.

The Rainmaker Sprayer replacement Lance Assembly includes handle, lance and spray tip. Use for Rainmaker 4 gallon (708902) and 5 gallon sprayers (708900). The Spare Parts Kit is used to replace parts for Rainmaker 4 gallon and 5 gallon sprayers includes O-rings and sprayer tips.

Computerized control system for surface and submersible pumps. Designed to allow the automatic operation of the pump and prevent it from dry-running. Suitable for pumps with power up to 1500 watts, flow rate up to 32 GPM, operating pressure more than 26 psi and maximum pressure range between 51 psi and 116 psi. Easy to install as it is supplied with power cable with plug and cable with socket for the connection to the pump.

Wound polypropylene cartridge with rated filtering capacity of 20 microns. Particularly suitable to remove suspended particles such as sand. Suitable for installation at the entrance of pumps, industrial refrigerators, and softeners.

• Installs directly where needed for precise irrigation.
• Reduces setup time considerably.
• Features a 0.5 GPH pressure-compensating emitter with CNL check valve.
• Includes 30 inches (76 cm) of Super Flex Tubing.
• Comes with an angled barbed stake for secure placement.
• Requires a minimum operating pressure of 10 psi.

• Installs directly where needed for precise irrigation.
• Reduces setup time considerably.
• Features a 0.5 GPH pressure-compensating emitter with CNL check valve.
• Includes 18 inches (46 cm) of Super Flex Tubing.
• Comes with an angled barbed stake for secure placement.
• Requires a minimum operating pressure of 10 psi.

• Installs directly where needed for precise irrigation.
• Reduces setup time considerably.
• Features a 0.3 GPH pressure-compensating emitter with CNL check valve.
• Includes 30 inches (76 cm) of Super Flex Tubing.
• Comes with an angled barbed stake for secure placement.
• Requires a minimum operating pressure of 10 psi.

• Installs directly where needed for precise irrigation.
• Reduces setup time considerably.
• Features a 0.3 GPH pressure-compensating emitter with CNL check valve.
• Includes 18 inches (46 cm) of Super Flex Tubing.
• Comes with an angled barbed stake for secure placement.
• Requires a minimum operating pressure of 10 psi.

• Excellent ultra-violet (UV) resistance.
• Reflective and completely opaque to prevent algae growth.
• Withstands heat, direct sun and harsh chemicals.
• Produces cooler water temperatures enhancing plant growth.
• 17 millimeter polyethylene tubing (0.560 in ID x 0.660 in OD).
• 250 feet (76 meters).

• Netafim 4-Way Dripper Stake Assemblies simplify installation.
• Includes 4-way fitting and angled barbed stakes, preassembled for convenience.
• 36-inch (91.4 cm) lengths of Super Flex UV-protected PE tubing.

• Netafim 4-Way Dripper Stake Assemblies simplify installation.
• Includes 4-way fitting and angled barbed stakes, preassembled for convenience.
• 48-inch (122 cm) lengths of Super Flex UV-protected PE tubing.