Water & Aeration

HyperLogic 220v Chemical Injector is commonly used with our Commercial, Industrial and Heavy-Industrial Series RO systems in applications such as Anti-Scalant, Acid or Chlorine injection. This kit includes the 0.0-3 GPD adjustable peristalic pump, 15 gallon tank and low level shut-off float switch. Operates on 220V Single Phase 60Hz (0.9A). Formerly HyperLogic 11716

HyperLogic Anti-Scalant Concentrate is a broad spectrum anti-scalant for use with our Commercial, Industrial and Heavy-Industrial RO systems to help inhibit the formation of Calcium Carbonate scale build-up. When used in conjunction with our HyperLogic Chemical Injector Systems, this anti-scalant helps to prolong membrane life and is a cost effective alternative to water softeners. Additionally, the use of a Chemical Injector over a Softener reduces system down and time & drain to waste caused by the Softener regeneration process. Please refer to your HyperLogic Owners Manual for proper dilution and injection ratio. This product MUST be diluted prior to use. Product must be stored in a temperature controlled environment away from direct sunlight. Once opened, product should be used within 1-year. Chemical Injector tank should be emptied, cleaned and rebatched monthly for best performance. 45lb. Jug. Certified by NSF to NSF/ANSI Standard 60 for Drinking Water Treatment Chemicals. Former HyperLogic HL 11906

HyperLogic 2.5" x 20" 5 Micron, Melt-Blown Polypropylene, Ultra-Fine Sediment Filters remove silt, rust, dirt and other assorted suspended solids from the water. Commonly used in our Industrial & Heavy-Industrial Series RO systems, located in the stainless steel housing prior the RO, they offer OEM level protection to costly equipment such as the RO pump and help extend the life of RO membranes. Replacement should be performed monthly; sooner if Filter In-Filter Out delta exceeds 10%. Formerly HyperLogic HL 13519

HyperLogic Acid (low Ph) Membrane Cleaning Powder is formulated to help remove Calcium Carbonate, Hardness, Iron and mineral scale build-up from our Industrial and Heavy-Industrial Series RO membranes. With a regiment of regular membrane cleaning, membrane life, Permeate production and optimal salt rejection can be achieved. Membrane cleaning procedure should be performed as part of your sites SOP (standard operating procedure) for the HyperLogic systems. Other indicators include RO exhibiting lower Permeate flow or lower salt rejection than normal. Please refer to your RO's Operational Manual or included Instructions for use and handling care details. 25lb. pail. Formerly HyperLogic HL 13560

With a regiment of regular membrane cleaning, membrane life, Permeate production and optimal salt rejection can be achieved. Membrane cleaning procedure should be performed as part of your sites SOP (standard operating procedure) for the HyperLogic systems. Other indicators include RO exhibiting lower Permeate flow, strong odor or mold growth on the membrane scroll end. Please refer to your RO's Operational Manual or included Instructions for use and handling care details. 25lb. pail. Formerly HyperLogic HL 13561

Formerly HyperLogic HL 13564

• All-purpose sprayer for herbicides, pesticides, and liquid fertilizers.
• Powered by a rechargeable battery; no manual pumping needed.
• Equipped with an attached pull cart for easy mobility.
• Can be worn as a backpack with included padded straps.
• Ideal for large jobs with a 4 ft hose.
• Comes with four interchangeable nozzles for various applications.
• Features a trigger with a lock-on option for continuous spraying.
• Includes an integrated filter.

• Removes up to 99% of chlorine and 90% of sediment, rust, silt, and volatile organic compounds.
• Filters particulates down to 5 microns at a flow rate of 2 GPM.
• Produces 120 gallons per hour of clear water.
• Filter capacity of 7,500 gallons.
• Serves as a high-capacity pre-filter for Stealth RO units.
• Unit dimensions: 12 in x 25.5 in x 6 in.
• Weight: 12.6 lb.

Electronic control unit for EcoPlus® Commercial Chillers.

• Botanicare Hydroguard is a bacterial root inoculant.
• It is designed to decompose organic matter.
• It may convert organic matter into nutrients.
• Nutrients can be absorbed directly by plants' roots.

• Lowers the pH of irrigation water or nutrient solutions without adding phosphorus, nitrogen, or sulfate.
• Non-caustic.
• Non-corrosive.
• Do not need to be shipped Hazmat like other adjusters.
• Alternative to harsh mineral hydroxides.
• Triple zero HMIS score.
• Does not contribute nutritional value like other adjusters.
• Concentrated formula.

General Hydroponics® pH Control Kit contains 8 oz pH UP, 8 oz pH DOWN, 1 oz indicator and vial.

General Hydroponics® pH Down acid formulation uses phosphoric acid to lower the pH to the proper level.

• Easy pH testing with simple steps.
• Fill a test tube halfway with nutrient solution.
• Add a few drops of pH Test Indicator.
• Observe color change for pH reading.
• Preferred by experienced growers for reliability and ease of use.
• Use three drops per 5 ml of solution.

• Utilize the John Guest Quick Connect (QC) 2-Way Splitter for multiple reservoirs.
• Compatible with the Stealth RO system and Small Boy system.
• Suitable for any system that uses 1/4 inch tubing.
• Use the 3/8 inch splitter for multiple reservoirs with the TallBoy system.
• Also compatible with any system that uses 3/8 inch tubing.

Use the John Guest Quick Connect (QC) Ball Valve Inline Shut-Offs to customize your indoor hydroponic garden water purification system.

Use John Guest 1/4 x 1/4 Inch Quick Connect (QC) Unions to customize your indoor hydroponic garden water purification system.

Use John Guest 1/4 Inch Quick Connect (QC) Tees to customize your indoor hydroponic garden water purification system.

Use John Guest 3/8 x 1/4 Inch Quick Connect (QC) Reducing Unions to customize your indoor hydroponic garden water purification system.

• Designed for source water high in hardness.
• Reduces calcium/magnesium scale accumulation.
• Extends the life of membranes.
• Manufactured to strict Hydro-Logic quality standards.
• Replace after processing 75,000 gallons.