Water & Aeration

HyperLogic Anti-Scalant Concentrate is a broad spectrum anti-scalant for use with our Commercial, Industrial and Heavy-Industrial RO systems to help inhibit the formation of Calcium Carbonate scale build-up. When used in conjunction with our HyperLogic Chemical Injector Systems, this anti-scalant helps to prolong membrane life and is a cost effective alternative to water softeners. Additionally, the use of a Chemical Injector over a Softener reduces system down and time & drain to waste caused by the Softener regeneration process. Please refer to your HyperLogic Owners Manual for proper dilution and injection ratio. This product MUST be diluted prior to use. Product must be stored in a temperature controlled environment away from direct sunlight. Once opened, product should be used within 1-year. Chemical Injector tank should be emptied, cleaned and rebatched monthly for best performance. 45lb. Jug. Certified by NSF to NSF/ANSI Standard 60 for Drinking Water Treatment Chemicals. Former HyperLogic HL 11906

HyperLogic 2.5" x 20" 5 Micron, Melt-Blown Polypropylene, Ultra-Fine Sediment Filters remove silt, rust, dirt and other assorted suspended solids from the water. Commonly used in our Industrial & Heavy-Industrial Series RO systems, located in the stainless steel housing prior the RO, they offer OEM level protection to costly equipment such as the RO pump and help extend the life of RO membranes. Replacement should be performed monthly; sooner if Filter In-Filter Out delta exceeds 10%. Formerly HyperLogic HL 13519

HyperLogic Acid (low Ph) Membrane Cleaning Powder is formulated to help remove Calcium Carbonate, Hardness, Iron and mineral scale build-up from our Industrial and Heavy-Industrial Series RO membranes. With a regiment of regular membrane cleaning, membrane life, Permeate production and optimal salt rejection can be achieved. Membrane cleaning procedure should be performed as part of your sites SOP (standard operating procedure) for the HyperLogic systems. Other indicators include RO exhibiting lower Permeate flow or lower salt rejection than normal. Please refer to your RO's Operational Manual or included Instructions for use and handling care details. 25lb. pail. Formerly HyperLogic HL 13560

With a regiment of regular membrane cleaning, membrane life, Permeate production and optimal salt rejection can be achieved. Membrane cleaning procedure should be performed as part of your sites SOP (standard operating procedure) for the HyperLogic systems. Other indicators include RO exhibiting lower Permeate flow, strong odor or mold growth on the membrane scroll end. Please refer to your RO's Operational Manual or included Instructions for use and handling care details. 25lb. pail. Formerly HyperLogic HL 13561

Formerly HyperLogic HL 13564

Hydro Flow® 's complete line of fittings is known for its superior performance and reliability. These non-corrosive plastic fittings are guaranteed to provide a secure, watertight connection. These fittings offer strength and durability. Hydro Flow Barbed Ball Valves regulate your hydroponic irrigation systems with a simple turn of the knob.

• Excellent ultra-violet (UV) resistance.
• Reflective and completely opaque to prevent algae growth.
• Withstands heat, direct sun and harsh chemicals.
• Produces cooler water temperatures enhancing plant growth.
• 17 millimeter polyethylene tubing (0.560 in ID x 0.660 in OD).
• 500 feet (152 meters).

• Excellent ultra-violet (UV) resistance.
• Reflective and completely opaque to prevent algae growth.
• Withstands heat, direct sun and harsh chemicals.
• Produces cooler water temperatures enhancing plant growth.
• 3/4 inch polyethylene tubing (.82 in ID x .94 in OD).
• 100 feet (30 meters).

• Engineered specifically for indoor home grows with an average of 4 to 24 lights or 12 to 96 plants.
• Flow Rates: 0.5 to 5 GPM (1.89 to 18.9 LPM)
• Pressure Range: 35 – 87 psi (2.5 - 6 BAR)
• Connection Size: ¾ inch inlet / outlet
• Dosing Range %: 0.05 - 0.5
• Dosing Range mL/gallon: 1.875 - 18.75 mL/G
• Dosing Range Ratio: 1:2000 to 1:200
• Maximum Temperature: 104 F (40 C)
• System Weight: 14.5 lb (6.585 kg)
• Spare Unit Weight: 2.5 lb (1.15 kg)
• Assembled System Dimensions: 11.81 L x 12.4 W x 17.72 H in (L 300 x l 315 x H 450 mm)
• Max Dosing Unit Dimensions: 6.3 L x 5.26 W x 13.58 H in (L 160 x l 133.5 x H 345 mm)
• Included Accessories: Mounting bracket, suction hose, weighted strainer, union connections and quick start guide.

The Dosatron® Hobby Cultivator Expansion Unit allows you to adapt your multi-pump system by adding more pumps based on the needs of your application.

Maintenance kit for Dosatron® Hobby Expansion Dosers [D15RE05] and Dosatron Hobby Cultivator System Dosers [SYSD15RE05VF].

Strainer Assembly for the D40MZ1000 40 GPM and D40MZ1000-HY 40 GPM Dosatron® injectors.

• For use with Hydro-Logic® micRO-75™, Stealth-RO™, or smallBoy®.
• Diameter: 1/4 inch OD.
• Length: 50 foot (15.24 meter) roll.
• Color: Black.
• 10 per case.

• For use with Hydro-Logic® micRO-75™, Stealth-RO™, or smallBoy®.
• Diameter: 1/4 inch OD.
• Length: 50 foot (15.24 meter) roll.
• Color: Blue.
• 10 per case.

• For use with Hydro-Logic® micRO-75™, Stealth-RO™, or smallBoy®.
• Diameter: 3/8 inch OD.
• Length: 50 foot (15.24 meter) roll.
• Color: Black.
• 10 per case.