Lighting

• Optimized for young plant propagation of vegetable and ornamental crops.
• Ideal for tissue culture, seedlings, and cutting/cloning propagation.
• Features a sleek form-factor, broad-spectrum light, and world-class energy efficiency.
• An average PPFD up to 160 µmol/m2/s over a 2' x 4' (61 x 122 cm) area with a 12" (30 cm) mounting height above canopy.
• Includes 10 lighting modules and covers 80 square feet (7.43 square meters) of canopy.
• Allows mounting as close as five inches (12.7 centimeters) from the plant canopy.
• Enables quick and easy deployment with a one-to-many design connecting up to ten modules to one power supply.
• Designed for a wide range of vertical farming applications.

• Designed to maximize the performance of your compatible Gavita® fixtures.
• Simplifies lighting management with under-friendly interfaces.
• Range of models ensures the right fit for equipment needs.
• Latest generation EL3 controller compatible with Titan Controls™ Grow Room Sensors.

• Eight-foot (2.4 meter) power cords for Gavita® LED fixtures.
• Plug or bare-wire to 5-pin Wieland connections.
• 120-volt, 208- to 240-volt, 277- to 400-volt options.

• Designed to be used with Gavita® 1700e LED fixtures.
• Allows users to control fixtures with a Gavita EL series controller.
• Utilizes cables with RJ45 connectors for daisy chaining the control signal between adapters.
• Adapters are cETLus listed and IP66 rated for commercial use.
• Additional RJ45 to RJ45 cables available.
• Use RJ45 to RJ9 cable for connection to the Gavita Master Controller EL1 or EL2.
• Use three-way splitter for branching signal into dual paths.

• High-performance LED grow light designed for craft cultivation.
• Optimized 1,600 µmol/s (PPF) output.
• PhysioSpec™ Broad R4 spectrum for full-cycle cultivation.
• 0-100% dimmer included for easy light intensity control.
• Package includes a 6-foot (1.8-meter) power cord.

• The Gavita® CT 1930e is the first LED to directly replace HPS.
• Fits seamlessly into existing HPS layouts.
• Highly energy-efficient delivering serious growing power.
• Designed as a 1:1 layout replacement for the Gavita Pro 1000e DE HPS.
• Compatible with wiring and electrical requirements for most indoor growing environments.
• Limits the cost and downtime required to convert facilities of every size.
• Delivers more light in a broader spectrum with up to 20% energy savings compared to Gavita 1000 W DE and single-ended HPS fixtures.*
• Compatible with Gavita EL Master Controllers (sold separately) and most building automation systems.
• Embedded controller technology enables control of up to 2,000 fixtures per EL Master control channel.

*based on average wattage of each fixture.

• The world’s most powerful metal halide (MH) grow light.
• Ideal for all phases of plant growth.
• Perfect for experienced growers who demand high-quality plant production.
• Keeps plants compact, producing large, colorful fruits, vegetables, and flowers.
• Shortens the vegetative state by one week, allowing for one extra crop per year.
• As close as you can get to natural sunlight.

• Helps you get the best yields from your plants.
• PowerVEG FS+UV base provides a well-balanced spectrum that closely mimics natural sunlight.
• Mix different PowerVEG colors to create your own customized light spectrum.

• A true VEG light for indoor growers.
• PowerVEG 420 provides a spectrum crucial for plant growth during the vegetation cycle.
• Focuses all spectral energy at 420 nanometers.

• Bridges the gap between vegetative and flowering stages.
• Ensures plants' responses are at their fullest at all times.
• Leads to stronger root growth.
• Produces compact plants with extremely short internodal spacing.

• Promotes vertical plant growth.
• Expands leaf size.
• Produces a red spectral light.
• Prepares plants for fruiting and flowering.

• A true flowering lamp for indoor gardeners.
• The PowerVEG 660 produces a red light spectrum.
• Enhances the flowering stage for plants.
• Essential for triggering fruiting and flowering.

• Extremely efficient low-heat horticultural lighting systems.
• T5 Super High Output (SHO) lighting provides an ideal spectrum for plant growth.
• Minimal heat output allows placement 6 to 8 in (15.24 to 20.32 cm) above plant canopy.
• No risk of scorching leaves, unlike MH lighting.
• Closer placement maximizes photosynthetic response and promotes fuller growth at lower wattage.
• Includes T5 SHO grow bulbs, built-in ballast, hanging hardware, and 12-foot (3.7-meter) grounded power cord.
• Two-year rebuild or replace warranty.
• ETL approved.
• Available in a variety of sizes.

• Designed to be used with LightEnerG Pro Light T5 HO Kits.
• Cost-efficient bulbs ideal for starting plants from seeds or cuttings.
• Can be used to add extra light during the fruiting and flowering stage.

• Can easily switch between MH and HPS bulbs by flipping a specialized switch.
• Also switchable between 120 V and 240 V.
• Use provided 120 V cord or 240 V cord (sold separately).
• No additional wiring is necessary.
• The aluminum housing dissipates heat and keeps components cool.
• Includes a top-of-the-line Aerovox® capacitor.
• Lamp cord receptacle accepts all LightEnerG lamp cords and reflectors.

• Magnetic ballast capable of switching between 120 V and 240 V.
• Use either the 120v or a 240v power cord (sold separately) to change the voltage of the ballast.
• No additional wiring is necessary.
• Can also be used with 600 W MH conversion lamps.
• Aluminum housing is specially designed to dissipate heat and keep components cool.
• Includes a top-of-the-line Aerovox® capacitor.
• Lamp cord receptacle accepts all LightEnerG lamp cords and reflectors.

• UL certified ballast units.
• North American made capacitor.
• Quad-tap (120 V, 208 V, 240 V, and 277 V).
• Must be assembled by a qualified electrician.

Replacement fuses for The ACE™ Digital Ballast.