Chillers, Heaters & Purification

Suitable for use with reservoirs, hydroponic systems and aquariums. Features a commercial-grade titanium heat exchanger for optimum performance and corrosion resistance. High-quality Japanese compressor is extremely efficient and reliable. Heavy-duty galvanized steel housing with a durable powder-coated finish. Digital LCD display allows for easy operation. Remote temperature controller with a 30 ft cord allows user to monitor and adjust chiller settings when the unit is installed in a remote location. Auto restart and temperature memory in the event of a power failure. Uses environmentally friendly R410A refrigerant. Comes with 2 fittings to allow chiller to be plumbed with 1 in hard PVC pipe or 1 in flexible tubing.

Heater tube is fully submersible. Automatic electronic heater. Double heating tube. Very durable and reliable. Easy temperature control. Ideal for saltwater and freshwater. Temp range: 68F (20C) to 93F (34C).

• Removes up to 99% of chlorine and 90% of sediment, rust, silt, and volatile organic compounds.
• Filters particulates down to 5 microns at a flow rate of 2 GPM.
• Produces 120 gallons per hour of clear water.
• Filter capacity of 7,500 gallons.
• Serves as a high-capacity pre-filter for Stealth RO units.
• Unit dimensions: 12 in x 25.5 in x 6 in.
• Weight: 12.6 lb.

Electronic control unit for EcoPlus® Commercial Chillers.

• Utilize the John Guest Quick Connect (QC) 2-Way Splitter for multiple reservoirs.
• Compatible with the Stealth RO system and Small Boy system.
• Suitable for any system that uses 1/4 inch tubing.
• Use the 3/8 inch splitter for multiple reservoirs with the TallBoy system.
• Also compatible with any system that uses 3/8 inch tubing.

Use the John Guest Quick Connect (QC) Ball Valve Inline Shut-Offs to customize your indoor hydroponic garden water purification system.

Use John Guest 1/4 x 1/4 Inch Quick Connect (QC) Unions to customize your indoor hydroponic garden water purification system.

Use John Guest 1/4 Inch Quick Connect (QC) Tees to customize your indoor hydroponic garden water purification system.

Use John Guest 3/8 x 1/4 Inch Quick Connect (QC) Reducing Unions to customize your indoor hydroponic garden water purification system.

• Designed for source water high in hardness.
• Reduces calcium/magnesium scale accumulation.
• Extends the life of membranes.
• Manufactured to strict Hydro-Logic quality standards.
• Replace after processing 75,000 gallons.

• Customized flow restrictor for optimal contact time with filtration media.
• Maximizes reduction of chlorine, sediment, rust, silt, mercury, lead, and PCBs (organic chlorine).
• Protects beneficial bacteria to invigorate organic compost, soil amendments, and bio-teas.
• Easily attaches to garden hose.
• 11,000-gallon capacity (30 GPD = 365 days), up to 2 GPM.
• KDF85/Granulated Catalytic Activated Carbon removes up to 99% of chlorine and chloramines.

• 4 x 40 inch, FRP wrapped, low energy, commercial RO membranes.
• Typically used in RO systems with white PVC membrane housings in commercial and industrial series.
• Features genuine, OEM quality, thin film composite (TFC) membrane material for consistent results.
• Effective with tap or brackish water, including in nutrient reclaim systems.
• Made in the USA from an ISO 9001:2015 Certified Facility.
• 100% Quality and Performance Tested.

• Designed for use near the inlet and outlet of prefiltration media tanks.
• Provides operational pressure and pressure delta information.
• Features a liquid-filled pressure gauge for monitoring water pressure.
• Includes a labcock test port for easy access to water testing locations.
• 1-inch female slip fittings on inlet and outlet.

• Designed for use with commercial, industrial, and heavy-industrial RO systems.
• Suitable for anti-scalant, acid, or chlorine injection applications.
• Includes a 0.0-3 GPD adjustable peristaltic pump.
• Comes with a 15-gallon tank.
• Features a low-level shut-off float switch.
• Operates on 220V Single Phase 60Hz (0.9A).

• HydroLogic HyperLogic AS111 is a broad-spectrum anti-scalant concentrate.
• Designed for commercial, industrial, and heavy-industrial RO systems.
• Inhibits calcium carbonate scale build-up.
• Works effectively with HyperLogic Chemical Injector Systems.
• Prolongs membrane life.
• Cost-effective alternative to water softeners.
• Reduces system downtime and drain-to-waste from softener regeneration.

• Effectively removes silt, rust, dirt, and other suspended solids.
• Commonly used in industrial and heavy-industrial reverse osmosis (RO) systems.
• Installed in stainless steel housing before the RO unit.
• Provides OEM-level protection for costly equipment, including RO pumps.
• Helps extend the life of RO membranes.
• Filters have a 5-micron rating.
• Made of melt-blown polypropylene for ultra-fine filtration.
• Measures 2.5 x 20 inches.

• Helps remove calcium carbonate, hardness, iron, and mineral scale build-up from Industrial and Heavy-Industrial Series RO membranes.
• Regular membrane cleaning can extend membrane life, enhance permeate production, and optimize salt rejection.
• Membrane cleaning should be included in your site's SOP (standard operating procedure) for HyperLogic systems.
• Indicators for cleaning include lower permeate flow or reduced salt rejection from the RO.
• 25 lb pail.

• Achieves longer membrane life, increased permeate production, and optimal salt rejection.
• Cleaning should be part of the site's SOP (standard operating procedure) for HyperLogic systems.
• Indicators for cleaning include lower permeate flow, strong odors, or mold growth on the membrane scroll end.
• 25 lb pail.

Formerly HyperLogic HL 13564.

• Use the 1/4-inch OD tubing for micRO-75™, Stealth-RO™, or smallBoy®.
• Use the 3/8-inch OD tubing for Evolution-RO™ or Merlin-Garden Pro™.
• Length: 50 foot (15.24 meter) rolls.
• Colors: Black or Blue.

The EcoPlus Chillers are suitable for use in reservoirs, hydroponic systems and fresh or saltwater aquariums. Each chiller provides a high-performance titanium heat exchanger for optimum performance and corrosion resistance. High-quality compressor is extremely efficient and reliable. The micro computer with digital LCD display allows for easy operation.

The Hydroid is the industry’s premier compact, portable commercial water filter at an affordable price. Achieve up to a 4,500 GPD (gallons of water per day) capacity (blended), or 3,000 GPD pure RO water. Not only is the Hydroid powerful, but it can produce a 2 parts product to 1 part wastewater ratio, making it the most efficient system in its class. New, groundbreaking technology for a compact system with commercial scale performance.

This system is capable of producing more than 1000 GPD or 42 gallons per hour of pure water. Remove 94%+ of all parts per million from your tap water. Can produce up to 1500 GPD at 80 PSI with an optional booster pump. Save more water by running 2:1 waste to product water ratio, or optional 1:1 ratio (included). Includes custom KDF/catalytic carbon filter for reduction of chlorine, chloramine, iron, sulfur and heavy metals. Simple and quick setup.

Ensure your Evolution RO1000 runs more efficiently. Helps protect the RO membranes and extends their life. Less filter changes and maintenance - every 7,500 gallons of purified water. Cleanable sediment filter is re-usable. Combination of KDF85 and the KDF55 with eco-friendly catalytic carbon filter reduces chlorine, chloramines, iron, sulfur, and heavy metals. - great for city or well water. Highly recommended when using more than 150 gallons of purified water per week on average.

• 1/2" inlet tubing to Evolution.
• 2 extra stages of filtration prior to the Evolution-RO.
• Extends Evolution-RO Prefilter life (without PreEvolution: 2,000 gallons, with PreEvolution: 7,500 gallons).
• Ensures your Evolution-RO runs more efficiently.