Create the ideal lighting environment for your greenhouse or growroom with high-performance solutions from trusted brands like Fluence , Gavita , and more. Whether you're looking for LED, HPS, or MH lighting equipment, we provide a comprehensive selection of fixtures, lamps, electrical components, cords, cables, and hangers to meet your needs. Connect with our lighting specialists for personalized support, a complimentary lighting map, and insights into available rebates that can maximize your investment.
Featured products
Add to compare list
P_00450
High-performance top lighting designed for commercial growers. Ideal for those wanting to push high-PPFD cultivation. Suitable for experimental applications or treatments.
Add to compare list
P_00533
The Fluence VYPR 3p offers high fixture PPF up to 2,330 µmol/s and high efficacy up to 3.8 µmol/s, enabling the direct replacement of a 1,000 W HPS fixture at more than 40% energy savings.
An optional reflector kit provides a wider light pattern and uniform PPFD at plant canopy.
Add to compare list
Q102008
The Fluence RAPTR Series is a high-output top light ideal for 1:1 HPS replacement in controlled environment agriculture. Designed to deliver maximum intensity with industry-leading efficacy, RAPTR is available with two optical distributions and a range of Physiospecâ„¢ spectrums tailored for high intensity indoor horticulture and high-efficiency greenhouse applications.
Add to compare list
Q102593
Includes the HR96 Reflector for maximum efficiency and uniformity. Designed with broad light dispersion in mind. Highly efficient passive ballast cooling for longer fixture life. Sealed housing with a Gore-Tex® ventilation plug. Controllable output up to 1,150 watts. Equipped with a dimming knob for manual light output adjustment. Features a Repeater Bus interface for control with a Gavita EL Controller (sold separately). Connect up to 100 fixtures in a single daisy chain series, up to five daisy chains per EL controller output. A single EL controller output can control up to five 100-fixture daisy chains.
Add to compare list
Q101147
Maximizes the grow space for higher crop yields and better quality. Designed for single or multi-tier growers. A bright and flexible rack lighting solution. Light output PPF: 2,180 µmol/s. Efficacy: 2.75 µmol/J @ 277V AC. AC input power: 790 W @ 277 V AC. Certifications: IEC60598-1, UL 8800, UL 1598 Wet Location, DLC. Spectrum: PhysioSpec™ Broad R4. Length: 47 inches (1,194 millimeters).
Add to compare list
Q112719
Broad white light with enhanced blue spectrum which may intensify terpene and cannabinoid profiles. A light weight, foldable, 6-bar design based on the Gavita Pro RS 2400e LED platform for balanced output and efficiency. Dimmable down to 10% with the Gavita EL3 Master controller (sold separately). Premium Gavita diodes. Broad Range Gavita driver to accomodate a larger voltage range of 208 - 480 V. IP66 wet rating and ANSI/CAN/UL 8800 compliant. Assembled in the USA using foreign components. Dimensions: 44.8 in x 43.25 in x 3.3 in (113.8 x 109.9 x 8.4 cm) Weight: 29.8 lbs (13.5 kg).
Sort by
Position
Name Asc
Name Desc
Price Asc
Price Desc
Newest
Sku Asc
Sku Desc
Stock Asc
Stock Desc
Display
25
40
60
items per page
Add to compare list
Q100935
Magnetic ballast capable of switching between 120 V and 240 V. Use either the 120v or a 240v power cord (sold separately) to change the voltage of the ballast. No additional wiring is necessary. Can also be used with 600 W MH conversion lamps. Aluminum housing is specially designed to dissipate heat and keep components cool. Includes a top-of-the-line Aerovox® capacitor. Lamp cord receptacle accepts all LightEnerG lamp cords and reflectors.
Add to compare list
Q100938
UL certified ballast unit. North American made capacitor. Quad-tap (120 V, 208 V, 240 V, and 277 V). Must be assembled by a qualified electrician. Only for use with HPS bulbs.
Add to compare list
Q100926
Designed to be used with LightEnerG Pro Light T5 HO Kits. Cost-efficient bulbs ideal for starting plants from seeds or cuttings. Can be used to add extra light during the fruiting and flowering stage.
Add to compare list
Q100927
Designed to be used with LightEnerG Pro Light T5 HO Kits. Cost-efficient bulbs ideal for starting plants from seeds or cuttings. Can be used to add extra light during the fruiting and flowering stage.
Add to compare list
Q100943
State-of-the-art, UL-approved electronic ballast. Compatible with both MH and HPS bulbs. Features a dimmable switch with the ability to adjust watt output for three different settings. Has carefully arranged circuit boards and stainless steel ball bearing fans. Runs 15% cooler than standard ballasts, ensuring longer life and improved performance. Generator-ready with the most stable output frequency of any comparable ballast. Results in lower power loss and better overall power management. Has a power factor of 99.9% for 100% of the time. Far more efficient than older core and coil ballasts. Wattage: 1,000 W.
Add to compare list
Q100944
State-of-the-art, UL-approved electronic ballast. Compatible with both MH and HPS bulbs. Features a dimmable switch with the ability to adjust watt output for three different settings. Has carefully arranged circuit boards and stainless steel ball bearing fans. Runs 15% cooler than standard ballasts, ensuring longer life and improved performance. Generator-ready with the most stable output frequency of any comparable ballast. Results in lower power loss and better overall power management. Has a power factor of 99.9% for 100% of the time. Far more efficient than older core and coil ballasts. Wattage: 600 W.
Add to compare list
Q100945
State-of-the-art, UL-approved electronic ballast. Compatible with both MH and HPS bulbs. Features a dimmable switch with the ability to adjust watt output for three different settings. Has carefully arranged circuit boards and stainless steel ball bearing fans. Runs 15% cooler than standard ballasts, ensuring longer life and improved performance. Generator-ready with the most stable output frequency of any comparable ballast. Results in lower power loss and better overall power management. Has a power factor of 99.9% for 100% of the time. Far more efficient than older core and coil ballasts. Wattage: 400 W.
Add to compare list
Q100953
Comes with a universal position mogul socket. Mounted to an engineered and modified powder-coated octagonal wire box with a hanger. Lamp cord includes a LightEnerG Wire Strain Relief for added durability. Plug the male end into a LightEnerG ballast and add the appropriate lamp and reflector. Gauge: 14/3. Voltage: 300 V.
Add to compare list
Q100954
Comes with a universal position mogul socket. Mounted to an engineered and modified powder-coated octagonal wire box with a hanger. Lamp cord includes a LightEnerG Wire Strain Relief for added durability. Plug the male end into a LightEnerG ballast and add the appropriate lamp and reflector. Gauge: 16/3. Voltage: 600 V.
Add to compare list
Q100956
Comes with a universal position mogul socket with a hanger. Lamp cord includes LightEnerG wire strain relief for added durability. Gauge: 14/3. Voltage: 300 V. Length: 15 feet (4.5 meters).
Add to compare list
Q100957
Comes with a universal position mogul socket with a hanger. Lamp cord includes LightEnerG wire strain relief for added durability. Gauge: 16/3. Voltage: 600 V. Length: 15 feet (4.5 meters).
Add to compare list
Q100958
Bare-wire-end male power cords. Used between a ballast and a power outlet. Gauge: 14/3. Length: 6 feet (1.8 meter).
Add to compare list
Q100949
Premium 600 V, 1500 W, 5KV-pulse-rated porcelain mogul base sockets. Accommodate all mogul base bulbs in a universal position. Mogul cap, washer, and leads are included.
Add to compare list
Q100948
Premium 600 V, 1500 W, 5KV-pulse-rated porcelain mogul base sockets. Accommodate all mogul base bulbs in a universal position. Mogul cap and washer are included.
Add to compare list
Q100939
UL certified ballast unit. North American made capacitor. Quad-tap (120 V, 208 V, 240 V, and 277 V). Must be assembled by a qualified electrician. Only for use with MH bulbs.
Add to compare list
Q100940
15 amp / 250 volt replacement fuse for The ACEâ„¢ Digital Ballast.
Add to compare list
Q100941
10 amp / 250 volt replacement fuse for The ACEâ„¢ Digital Ballast.
Add to compare list
Q100942
6.3 amp / 250 volt replacement fuse for The ACEâ„¢ Digital Ballast.
Add to compare list
Q100975
Used between a ballast and a mogul socket or reflector. Plug the male end into the ballast. Hard-wire the bare wire end to the mogul socket or reflector. Gauge: 16/3. Length: 25 foot (7.6 meters). Voltage: 600 V.
Add to compare list
Q100967
Versatile bare-wire-end female power cords. Suitable for a variety of applications. Gauge: 14/3. Length: 3 feet (1 meter).
Add to compare list
Q100968
Used between a ballast and a mogul socket or reflector. Plug the male end into the ballast. Hard-wire the bare wire end to the mogul socket or reflector. Gauge: 14/3. Length: 1 foot (30 centimeters). Voltage: 300 V.
Add to compare list
Q100970
Used between a ballast and a mogul socket or reflector. Plug the male end into the ballast. Hard-wire the bare wire end to the mogul socket or reflector. Gauge: 14/3. Length: 25 foot (7.6 meters). Voltage: 300 V.
Add to compare list
Q100971
Used between a ballast and a mogul socket or reflector. Plug the male end into the ballast. Hard-wire the bare wire end to the mogul socket or reflector. Gauge: 14/3. Length: 1 foot (30 centimeters). Voltage: 600 V.
Add to compare list
Q100965
Versatile bare-wire-end female power cords. Suitable for a variety of applications. Gauge: 14/3. Length: 3 feet (1 meter).
Add to compare list
Q100966
Versatile bare-wire-end female power cords. Suitable for a variety of applications. Gauge: 14/3. Length: 6 feet (1.8 meter).