Growing Environment

The Eos® 2 Digital Humidity Controller makes dialing in your room's environment a breeze. It can be used to activate a device to increase humidity in your room or decrease the humidity in your room. The Eos® 2 utilizes a high-quality humidity sensor as well as a photocell for day and night control. Settings are easily programmed with the knob that doubles as a button to change settings. A slide switch controls whether the controller is running in Day, Night or 24 hr mode. 10 Amps/ 120 V/ 60 Hz.

Titan Controls® Zephyr™ 1: Temperature control range is 55°F to 95°F. Controls cooling or heating equipment. Day and night settings keep temperature within 4°F of set point. 6 ft temperature probe is accurate to within 2°F. Enclosure protects internal components from dust, rust and moisture. ETL listed for commercial applications. 15 Amps/ 120 V/ 60 Hz.

Titan Controls® Zephyr™ 2: Controller turns off your lights if high temperature exceeds set point. Built-in 1—30 min hot start delay with HOLD feature. 6 ft temperature probe is accurate to within 2°F. Protects your garden and your plants. Enclosure resists dust, rust and moisture. 15 Amps maximum/ 120 V/ 60 Hz.

Temperature control range is 55°F to 95°F. Controls cooling or heating equipment. Day and night settings keep temperature within 4°F of set point. 6 ft temperature probe is accurate to within 2°F. Enclosure protects internal components from dust, rust and moisture. ETL listed for commercial applications. 15 Amps/ 120 V/ 60 Hz.

Controller turns off your lights if high temperature exceeds set point. Built-in 1 to 30 min hot start delay with HOLD feature. 6 foot temperature probe is accurate to within 2°F. Protects your garden and your plants. Enclosure resists dust, rust and moisture. 15 Amps maximum/ 120 V/ 60 Hz.

This CO₂ Rain® System includes 25 ft of laser-drilled 1/8 in tubing, 6 eye hooks, 1/8 in plastic T fitting and instructions. Additional 100 ft roll of tubing is also available.

This CO₂ Rain® System includes 25 ft of laser-drilled 1/8 in tubing, 6 eye hooks, 1/8 in plastic T fitting and instructions. Additional 100 ft roll of tubing is also available.

Replacement parts for Titan Controls® CO₂ Regulators. The white plastic washers are replacements for the Titan CO₂ Regulator.

This CO₂ Rain® System includes 25 ft of laser-drilled 1/8 in tubing, 6 eye hooks, 1/8 in plastic T fitting and instructions. Additional 100 ft roll of tubing is also available.

• High-velocity oscillating metal wall mount fan.
• Ideal for homes, greenhouses, garages, workshops, and more.
• A great space saver; easily mounted.
• Rugged all-metal construction with black powder-coated finish
• Aluminum fan blades.
• Three speed settings, oscillation controls, and adjustable tilt.
• 6 foot (1.8 meter), 120 V power cord.
• Includes wall-mount bracket and hardware.
• 20 inch (50 centimeter) fan.

The Max-Fan® Pro Series is even more efficient and stronger than the original Max-Fan design. The Max-Fan Pro Series has a much more robust housing due to the fiberglass reinforced plastic compounds that meet all of the UL and CSA requirements. The fans have three control speeds for true performance. These fans run quieter than the Max-Fan. The fans come with the EZ Mount™ bracket for easy mounting.

The 240 V Max-Fans™ can bring energy efficiency to larger systems. These high-powered Max-Fans potentially save hundreds of dollars each year in energy costs using a lightweight aluminum housing. Comes with a 6 ft power cord (240 V).

The Max-Fan® is the first fan that has been developed with a Computational Fluid Dynamics (CFD) program. CFDs are used for engineering aircraft propulsion engines. The perfectly designed 3D blades of the impeller and stator make this fan extremely powerful and energy efficient. Compared with other inline fans, the efficiency is 50% to 100% higher. 6 inch to 14 inch come pre-wired with an 8 foot 120 V power cord. Can-Fan® bring its innovation to market and sets a new standard for performance. The Max-Fan is a more powerful and efficient fan that takes less energy to run.

The Max-Fan® is the first fan that has been developed with a Computational Fluid Dynamics (CFD) program. CFDs are used for engineering aircraft propulsion engines. The perfectly designed 3D blades of the impeller and stator make this fan extremely powerful and energy efficient. Compared with other inline fans, the efficiency is 50% to 100% higher. 6 inch to 14 inch come pre-wired with an 8 foot 120 V power cord. Can-Fan® bring its innovation to market and sets a new standard for performance. The Max-Fan is a more powerful and efficient fan that takes less energy to run.

The Max-Fan® is the first fan that has been developed with a Computational Fluid Dynamics (CFD) program. CFDs are used for engineering aircraft propulsion engines. The perfectly designed 3D blades of the impeller and stator make this fan extremely powerful and energy efficient. Compared with other inline fans, the efficiency is 50% to 100% higher. 6 inch to 14 inch come pre-wired with an 8 foot 120 V power cord. Can-Fan® bring its innovation to market and sets a new standard for performance. The Max-Fan is a more powerful and efficient fan that takes less energy to run.

The 240 V Max-Fans™ can bring energy efficiency to larger systems. These high-powered Max-Fans potentially save hundreds of dollars each year in energy costs using a lightweight aluminum housing. Comes with a 6 ft power cord (240 V).

The 240 V Max-Fans™ can bring energy efficiency to larger systems. These high-powered Max-Fans potentially save hundreds of dollars each year in energy costs using a lightweight aluminum housing. Comes with a 6 ft power cord (240 V).

The Ideal-Air™ Pro Series Ultra Sonic Humidifier is designed with ultra-sonic transducers to supply ultra-fine water particles. This is to help form a more balanced humidity field over your plant's entire canopy. Ideal-Air Pro Series Ultra Sonic Humidifier plates are made from cold-rolled steel and a stainless steel box with a standard water inlet with overflow safety switch, reservoir drain outlet, sediment filter, LED display and humidity control (30% to 90%). This unit is designed to produce up to 150 pints per day of ultra-fine mist. 115 V, 60 Hz and 2.7 Amps. We recommend all Ultra Sonic Humidifiers be ducted, using 4 in PVC or 4 in DWV plastic pipe works best. Units should not be run without ducting or the top of the unit may be covered in water and shut off. Please don't fill the unit through the discharge piping outlets. Doing this will overfill the tank and prevent the unit from creating humidity. The unit should only be filled through the provided hose and float valve to ensure proper water level and correct operation.

LP and NG replacement burners. Made specifically for to work with Titan Controls® Ares® CO₂ generators.

Works with AC/DC brush-type motors 15 Amps or less. Three adjustable switch settings: full, variable and off. When switch is set to variable, adjustable knob controls fan speed. 6 ft 120 V power cord and up to 15 Amps. Will not work with soft or slow-start motors.

Can-Filter® has designed and built the Can-Lite™ for convenience and long life. 100% Australian granulated carbon, aluminum top and bottom, integrated flange and 51% open perforation are features of the Can-Lite™ filter. The Can-Lite™ is available in 7 sizes with a CFM range of 89–3000. Can-Lite™ is manufactured in a dedicated carbon filter plant in North America. Each filter is shrink wrapped, boxed and labeled for ease of use.

"The Ideal-Air Dehumidifiers are now rated at AHAM standards (80°F, 60% Relative Humidity). There is no change to the unit itself, only to the temperature and humidity at which the reading is being taken from. Previously they were rated at a higher temperature and humidity level based on hydroponic industry standard usage (86°F, 80% Relative Humidity). They will now be rated at AHAM standards based on the recent US Department of Energy ruling. Rated at 120 pints per day at 86°F/80% RH, now rated 60 Pint @ 80°F, 60% RH Quick maintenance with easy filter access that is removable and washable. Low temperature defrosting. Easy to move with built-in handles and wheels. Features a LED display panel. Removable water tank with an automatic shutoff when the reservoir is full. Internal condensate pump for easy water disposal. Can also be plumbed for permanent drainage. Tank reservoir capacity is 10 liters or 21 pints. 7 Amps/680 W/271 CFM. 115 V."