HydroLogic

View as Grid List
Sort by
Q102337.jpg

Hydro-Logic Pressure Booster Pump

P_00264
This pump is designed to be installed before the Stealth RO to boost the inlet pressure. Wells and low pressure (below 40 PSI) water sources can benefit greatly from this pump. It boosts the pressure significantly allowing the Stealth RO to run with higher flow and more efficiency while having better TDS removal. The pump is designed for long service life and runs very quietly. Comes with a high pressure switch and operates at 110V.
Q102337.jpg

Hydro-Logic Pressure Booster Pump for Stealth

Q102337

This pump is designed to be installed before the Stealth RO to boost the inlet pressure. Wells and low pressure (below 40 PSI) water sources can benefit greatly from this pump. It boosts the pressure significantly, allowing the Stealth RO to run with higher flow and more efficiency while having better TDS removal. The pump is designed for long service life and runs very quietly. Comes with a high pressure switch and operates at 110V.

Q102334.jpg

Hydro-Logic Pressure Booster Pump Evolution RO Continuous Use / Heavy Duty

Q102334

A work horse pump that will power your Evolution-RO to 80 psi (pump requires a minimum of 20 psi to operate). Heavy duty commercial booster pump designed for continuous use. Includes integrated low pressure and high pressure switches. No Electronic Shutoff Kit required when used in conjunction with the float valve Adjustable pressure dial. Direct 110V plug-in and includes pump protector (inlet filter) and 1/2 quick connect (QC) fittings. This unit does not thermally cycle.

Q102406.jpg

Hydro-Logic® Big Boy™

P_00255

Big Boy™ extra high capacity dechlorinator and sediment filter. High flow rate of 7 gallons per minute or 420 gallons per hour. It has a 25,000 gallon capacity. Removes 99% of chlorine and 95%+ of sediment, rust, silt, etc. Includes: 2-stage oversized housings with pleated, cleanable sediment, and carbon block filters, inlet and outlet pressure gauges, heavy-duty wall-mountable aluminum bracket—NO RUST, 1 in inlet and outlet, filter wrench and instructions.

Unit size 29.5 in x 16 in x 8.5 in and weight is 30 lb.

Q102405.jpg

Hydro-Logic Big Boy - Carbon Filter - Green - Coconut

Q102405

Green Coconut Carbon Filters are the carbon block pre-filter that will reduce chlorine, organic chemicals, mercury, lead, PBCs, sulfur and heavy metals. #741604 is 20 in x 4.5 in. #728845 is 20 in x 2.5 in. #741646 is 10 in x 2.5 in. #741656 is 20 in x 2.75 in.

Q102406.jpg

Hydro-Logic Big Boy - Sediment Filter - Pleated/Cleanable

Q102406

The pleated sediment filters are cleaned by rinsing regularly with a hose. The filters reduces silt, rust, dirt, sand and sediment. Change filters every 6-12 months. #741654 is 10 in x 2.5 in. #741642 is 10 in x 4.5 in. #741606 is 20 in x 4.5 in.

Q102404.jpg

Hydro-Logic Evolution Wall Mount Bracket

Q102404

Wall mount bracket for the Evolution-RO1000. Stainless steel, heavy duty.

Q102411.jpg

Hydro-Logic Stealth/Small Boy KDF85/Catalytic Carbon Upgrade Filter

Q102411

KDF/Catalytic Carbon Filters reduce iron, sulfur, chlorine, chloramines and heavy metals. Great for city or well water! Bacteriostatic qualities do not allow microbes to breed in filter. Doubles standard green carbon filter. #741622 is 10 in x 2.5 in. #741624 is 20 in x 2.5 in. #741626 is 20 in x 4.5 in.

Q102422.jpg

Hydro-Logic Pressure Gauge Kit 1/2Inches QC Tee liquid filled for Evolution RO

Q102422
"Hydro-Logic Pressure Gauge Kit 1/2"" QC Tee liquid filled for Evolution ROUse the HydroLogic Reverse Osmosis (RO) Water Filter Pressure Gauge to customize your indoor hydroponic garden."
Q102423.jpg

Hydro-Logic Wrench Stealth RO Double ended

Q102423

Stealth-RO™ double-ended wrench for standard filter and membrane housings.

Q102429.jpg

Hydro-Logic® Chlorashield Membranes

P_00256

Hydro-Logic® Chlorashield membranes remove 100% of chloramine and are great for city water. Rated at 1 GPM down to 1 micron. They are made in the USA and have a low pressure drop combined with exceptionally high dirt holding capacity. HGC728772 is for Evolution-RO systems (20 in x 2.5 in) and should be replaced after 2,500 gallons. HGC741668 is for TallBoy systems (20 in x 2.75 in) and should be replaced after 6,000 gallons. HGC741640 is for PreEvolution systems (10 in x 4.5 in) and should be replaced after 7,500 gallons. HGC741700 is for smallBoy/Stealth-RO systems (9.75 in x 2.75 in) and should be replaced after 1,500 gallons when used with Stealth-RO systems and 3,000 gallons when used in smallBoy systems.

Q102429.jpg

Hydro-Logic ChloraShield smallBoy/StealthRO Replaceable Upgraded filter (20/cs)

Q102429
The Evolution RO1000™ KDF/Catalytic Carbon pre-filter is the standard carbon pre-filter included with system. For chlorine and chloramines reduction for city water. Also for well water for iron hydrogen sulfide and heavy metals reduction. The Evolution RO1000™ Membrane Element is the standard membrane included with system. 2 needed for system.
Q102425.jpg

Hyper-Logic Reverse Osmosis Membrane XLE

Q102425
Q112789.jpg

Hydro-Logic Hyperlogic Custom Water Filtration System

Q112789

Options from 6,000 GPD to 19,000 GPD, depending on water source. Liquid filled pressure gauges for pre-filter in and out, concentrate pressure and system pressure. Stainless steel multistage high pressure RO pump with SS pump throttling valve. 5 micron 20 in x 4.5 in cartridge filter and housing sediment pre-filter. System control, recycle control and pump throttle valves.

  • Options from 6,000 GPD to 19,000 GPD.
  • Liquid filled pressure gauges for pre-filter in and out, concentrate pressure and system pressure.
  • Stainless steel multistage high pressure RO pump with SS pump throttling valve.
  • 5 micron 20 in x 4.5 in cartridge filter and housing sediment pre-filter.
  • Product, concentrate and recycle flowmeters.
  • ARCS treats the condensate runoff for general reuse without producing any waste.
  • ARCS treats 10 GPM [14,400 GPD] up to 20 GPM [28,800 GPD].
Q112788.jpg

Hyper-Logic Cartridge Media Filter Anti-Scale CARTRIDGE 20Inches x 4.5Inches

Q112788
Q112787.jpg

Hyper-Logic Sediment Pre-Filter 20Inchesx4.5Inches poly spun 5 micron

Q112787
Q112857.jpg

Hyper-Logic Float Switch Assembly Dual Level Dual High

Q112857
Q112870.jpg

Hydro-Logic Stealth Filter Housing

Q112870
Q112871.jpg

Hydro-Logic Stealth 300 Flush Valve/Flow Restrictor

Q112871
Q112860.jpg

Hydro-Logic ChloraShield BIGBoy Replaceable Upgraded Filter (6/cs)

Q112860
Q102319.jpg

Hydro-Logic® Membranes

P_00545

Replace membranes when product water decreases and/or ppm increase. Merlin Garden Pro and Evolution RO1000 membranes reduce 94%+ of total dissolved solids. Stealth RO100/200, Stealth RO150/300 and microRO-75 membranes reduces 98%+ of total dissolved solids. The Evolution RO1000 and Merlin Garden Pro systems need two (2) membranes. For all membranes, RO output depends on the source water temperature. At 77°, the system should produce 100% of the rated output. As the temperature drops or increases, so does the output.

Q102331.jpg

Hydro-Logic Stealth RO 300

P_00543

Removes 98%+ of all contaminants in your tap water. Leading the industry in efficiency, the Stealth has a 2:1 waste to product water ratio. Optional 1:1 ratio flow restrictor saves 50% more waste water. Customized for gardening and hydroponics. The Stealth RO™ 300 produces 300 GPD of ultra pure water. Includes: 3-stage RO unit, 2 RO membranes, carbon filter, cleanable sediment filter, automatic shut-off cartridge, wall mountable metal bracket, garden hose connector, inline shut-off, 8 ft RO and drain line, 5 ft inlet line, filter wrench and instructions. Membrane Power Flush Kit now included.

Unit size: 18.5 in x 16 in x 6 in and weight: 12.5 Ib.

Q102332.jpg

Hydro-Logic® Green Coconut Carbon Filters

P_00546

Green Coconut Carbon Filters are the carbon block pre-filter that will reduce chlorine, organic chemicals, mercury, lead, PBCs, sulfur and heavy metals. #741604 is 20 in x 4.5 in. #728845 is 20 in x 2.5 in. #741646 is 10 in x 2.5 in. #741656 is 20 in x 2.75 in.

Q102406.jpg

Hydro-Logic® Pleated/Cleanable Sediment Filters

P_00547

The pleated sediment filters are cleaned by rinsing regularly with a hose. The filters reduces silt, rust, dirt, sand and sediment. Change filters every 6 months. #741654 is 10 in x 2.5 in. #741642 is 10 in x 4.5 in. #741606 is 20 in x 4.5 in.

Refine
×