Water & Aeration

Green Coconut Carbon Filters are the carbon block pre-filter that will reduce chlorine, organic chemicals, mercury, lead, PBCs, sulfur and heavy metals. #741604 is 20 in x 4.5 in. #728845 is 20 in x 2.5 in. #741646 is 10 in x 2.5 in. #741656 is 20 in x 2.75 in.

This pump is designed to be installed before the Stealth RO to boost the inlet pressure. Wells and low pressure (below 40 PSI) water sources can benefit greatly from this pump. It boosts the pressure significantly, allowing the Stealth RO to run with higher flow and more efficiency while having better TDS removal. The pump is designed for long service life and runs very quietly. Comes with a high pressure switch and operates at 110V.

A work horse pump that will power your Evolution-RO to 80 psi (pump requires a minimum of 20 psi to operate). Heavy duty commercial booster pump designed for continuous use. Includes integrated low pressure and high pressure switches. No Electronic Shutoff Kit required when used in conjunction with the float valve Adjustable pressure dial. Direct 110V plug-in and includes pump protector (inlet filter) and 1/2 quick connect (QC) fittings. This unit does not thermally cycle.

Green Coconut Carbon Filters are the carbon block pre-filter that will reduce chlorine, organic chemicals, mercury, lead, PBCs, sulfur and heavy metals. #741604 is 20 in x 4.5 in. #728845 is 20 in x 2.5 in. #741646 is 10 in x 2.5 in. #741656 is 20 in x 2.75 in.

The pleated sediment filters are cleaned by rinsing regularly with a hose. The filters reduces silt, rust, dirt, sand and sediment. Change filters every 6-12 months. #741654 is 10 in x 2.5 in. #741642 is 10 in x 4.5 in. #741606 is 20 in x 4.5 in.

Wall mount bracket for the Evolution-RO1000. Stainless steel, heavy duty.

KDF/Catalytic Carbon Filters reduce iron, sulfur, chlorine, chloramines and heavy metals. Great for city or well water! Bacteriostatic qualities do not allow microbes to breed in filter. Doubles standard green carbon filter. #741622 is 10 in x 2.5 in. #741624 is 20 in x 2.5 in. #741626 is 20 in x 4.5 in.

Stealth-RO™ double-ended wrench for standard filter and membrane housings.

Grower’s Edge® Disposable Diamond Textured Nitrile Gloves are latex and powder free. Heavy-duty 6 mil thickness for strength and durability while still maintaining its elasticity. Grower's Edge Disposable Diamond Textured Nitrile Gloves are ambidextrous and highly resistant to puncture, solvents, and grease. These gloves feature a one of a kind diamond print pattern on the glove to enhance grip and dexterity when compared to conventional disposable gloves. Suitable for a variety of applications including gardening, automotive, or cleaning.

Grower’s Edge® Disposable Black Nitrile Gloves are latex and powder free. Heavy-duty 6 mil thickness for strength and durability while still maintaining its elasticity. Grower’s Edge Disposable Black Nitrile Gloves are ambidextrous and highly resistant to puncture, solvents, and grease. These gloves feature an excellent grip and dexterity. Suitable for a variety of applications including gardening, automotive, and cleaning.

Grower’s Edge® Disposable Black Nitrile Gloves are latex and powder free. Heavy-duty 6 mil thickness for strength and durability while still maintaining its elasticity. Grower’s Edge Disposable Black Nitrile Gloves are ambidextrous and highly resistant to puncture, solvents, and grease. These gloves feature an excellent grip and dexterity. Suitable for a variety of applications including gardening, automotive, and cleaning.

Grower’s Edge® Disposable Black Nitrile Gloves are latex and powder free. Heavy-duty 6 mil thickness for strength and durability while still maintaining its elasticity. Grower’s Edge Disposable Black Nitrile Gloves are ambidextrous and highly resistant to puncture, solvents, and grease. These gloves feature an excellent grip and dexterity. Suitable for a variety of applications including gardening, automotive, and cleaning.

• Barb ends fit securely on UV Polyethylene Tubing (#Q102449)
• Techlock threaded caps and compression rings ensure a tight seal
• Operating pressure range: 0 to 100 psi

• Barb ends fit securely on UV Polyethylene Tubing (#Q102449)
• Techlock threaded caps and compression rings ensure a tight seal
• Operating pressure range: 0 to 100 psi

• Barb ends fit securely on UV Polyethylene Tubing (#Q102449)
• Techlock threaded caps and compression rings ensure a tight seal
• Operating pressure range: 0 to 100 psi

• Barb ends fit securely on UV Polyethylene Tubing (#Q102449)
• Techlock threaded caps and compression rings ensure a tight seal
• Operating pressure range: 0 to 100 psi

• Provide consistent water distribution across the entire system.
• Spray pattern angles downward to ensure water lands on the soil, avoiding contact with the pot's wall.
• Single-sided spray stake is ideal for placement near the edge of the pot.
• Alternative option includes Netafim's 'bow-tie' double-spray pattern for different watering needs.
• Pair with the Netafim 36 inch (#Q100716) or 48 inch (#Q102478) single spray stake assembly.

• Provide consistent water distribution across the entire system.
• Spray pattern angles downward to ensure water lands on the soil, avoiding contact with the pot's wall.
• Single-sided spray stake is ideal for placement near the edge of the pot.
• Alternative option includes Netafim's 'bow-tie' double-spray pattern for different watering needs.
• Pair with the Netafim 36 inch (#Q102480) or 48 in (#Q102479) single spray stake assembly.

• Provide consistent water distribution across the entire system.
• Spray pattern angles downward to ensure water lands on the soil, avoiding contact with the pot's wall.
• 'Bow-tie' double-spray pattern.
• Pair with the Netafim 36 inch (#Q102480) or 48 in (#Q102479) single spray stake assembly.

• Connect poly distribution lines to 5 mm UV Super Flex white polyethylene feed lines.
• Thread connectors into 5 mm tubing for secure attachment.
• Use a hole punch to create a spot for the connector in your poly distribution line.
• Insert the barbed end of the connector into the punched hole for a tight fit.
• Compatible with various water delivery methods, including drip stakes, spray stakes, and button emitters.

• 1.74 psi internal check valve prevents low emitter drainage, holding back up to a 3.9-foot column of water.
• Reduces the risk of contaminants being drawn into the emitter.
• Pressure compensating design ensures consistent flow from 10.15 to 58 psi.
• Exclusive TurboNet® flow path for regulated flow and continuous self-cleaning action.
• Sharp barb allows for easy installation with no tools required.

• 1.74 psi internal check valve prevents low emitter drainage, holding back up to a 3.9-foot column of water.
• Reduces the risk of contaminants being drawn into the emitter.
• Pressure compensating design ensures consistent flow from 10.15 to 58 psi.
• Exclusive TurboNet® flow path for regulated flow and continuous self-cleaning action.
• Sharp barb allows for easy installation with no tools required.