Chillers, Heaters & Purification

• Designed for use with commercial, industrial, and heavy-industrial RO systems.
• Suitable for anti-scalant, acid, or chlorine injection applications.
• Includes a 0.0-3 GPD adjustable peristaltic pump.
• Comes with a 15-gallon tank.
• Features a low-level shut-off float switch.
• Operates on 220V Single Phase 60Hz (0.9A).

• HydroLogic HyperLogic AS111 is a broad-spectrum anti-scalant concentrate.
• Designed for commercial, industrial, and heavy-industrial RO systems.
• Inhibits calcium carbonate scale build-up.
• Works effectively with HyperLogic Chemical Injector Systems.
• Prolongs membrane life.
• Cost-effective alternative to water softeners.
• Reduces system downtime and drain-to-waste from softener regeneration.

• Effectively removes silt, rust, dirt, and other suspended solids.
• Commonly used in industrial and heavy-industrial reverse osmosis (RO) systems.
• Installed in stainless steel housing before the RO unit.
• Provides OEM-level protection for costly equipment, including RO pumps.
• Helps extend the life of RO membranes.
• Filters have a 5-micron rating.
• Made of melt-blown polypropylene for ultra-fine filtration.
• Measures 2.5 x 20 inches.

• Helps remove calcium carbonate, hardness, iron, and mineral scale build-up from Industrial and Heavy-Industrial Series RO membranes.
• Regular membrane cleaning can extend membrane life, enhance permeate production, and optimize salt rejection.
• Membrane cleaning should be included in your site's SOP (standard operating procedure) for HyperLogic systems.
• Indicators for cleaning include lower permeate flow or reduced salt rejection from the RO.
• 25 lb pail.

• Achieves longer membrane life, increased permeate production, and optimal salt rejection.
• Cleaning should be part of the site's SOP (standard operating procedure) for HyperLogic systems.
• Indicators for cleaning include lower permeate flow, strong odors, or mold growth on the membrane scroll end.
• 25 lb pail.

Formerly HyperLogic HL 13564.

• For use with Hydro-Logic® micRO-75™, Stealth-RO™, or smallBoy®.
• Diameter: 1/4 inch OD.
• Length: 50 foot (15.24 meter) roll.
• Color: Black.
• 10 per case.

• For use with Hydro-Logic® micRO-75™, Stealth-RO™, or smallBoy®.
• Diameter: 3/8 inch OD.
• Length: 50 foot (15.24 meter) roll.
• Color: Black.
• 10 per case.

• For use with Hydro-Logic® micRO-75™, Stealth-RO™, or smallBoy®.
• Diameter: 3/8 inch OD.
• Length: 50 foot (15.24 meter) roll.
• Color: Blue.
• 10 per case.

• Use the 1/4-inch OD tubing for micRO-75™, Stealth-RO™, or smallBoy®.
• Use the 3/8-inch OD tubing for Evolution-RO™ or Merlin-Garden Pro™.
• Length: 50 foot (15.24 meter) rolls.
• Colors: Black or Blue.

• Fitting kit for the Hydro-Logic® Evolution RO1000™.
• Replacement parts.

Replace membranes when product water decreases and/or ppm increase. Merlin Garden Pro and Evolution RO1000 membranes reduce 94%+ of total dissolved solids. Stealth RO100/200, Stealth RO150/300 and microRO-75 membranes reduces 98%+ of total dissolved solids. The Evolution RO1000 and Merlin Garden Pro systems need two (2) membranes. For all membranes, RO output depends on the source water temperature. At 77°, the system should produce 100% of the rated output. As the temperature drops or increases, so does the output.