Lighting
LightEnerG Pro Light 8 T5 HO Kit Mini (8 Lamp), 2' x 25.5" x 3" (60 x 65 x 7.6 cm)
Q100925
- Extremely efficient low-heat horticultural lighting system.
- T5 Super High Output (SHO) lighting provides an ideal spectrum for plant growth.
- Minimal heat output allows placement 6 to 8 in (15.24 to 20.32 cm) above plant canopy.
- No risk of scorching leaves, unlike MH lighting.
- Closer placement maximizes photosynthetic response and promotes fuller growth at lower wattage.
- Includes T5 SHO grow bulbs, built-in ballast, hanging hardware, and 12-foot (3.7-meter) grounded power cord.
- Two-year rebuild or replace warranty.
- ETL approved.
- Dimensions (L x W x H): 2 ft x 25.5 in x 3 in (60 x 65 x 7.6 cm).
LightEnerG Lamp Cord Extension Male and Female 14/3 (25 ft / 7.6 m) (600 V)
Q100984
- Increases the distance from the ballast to the reflector.
- Used between a ballast and a male lamp cord.
- Features both male and female ends.
- Gauge: 14/3.
- Length: 25 feet (7.6 meters).
- Voltage: 600 V.
LightEnerG Strap Ratchet Hangers
Q100987
- Easily adjust the height of light fixtures and carbon filters.
- Built with high-grade, impact-resistant material.
- Rust-resistant components withstand any environment.
Luxx Lighting 18 W Clone LED (120 V) (2 / pack)
Q112515
- The perfect replacement for T5 fluorescent light fixtures
- 60% more efficient, using only 18 watts.
- Features a 9,000 K spectrum refined over two years for nursery applications.
- 39.6 µmol.
- Beam Angle: 120°.
- Water resistant housing and connectors.
- 18 W per strip (0.15 amps on 120 V).
- Daisy chain up to 100 strips on a 20 amp circuit.
- Two strips in array per shelf.
- Hanging clip and zip tie slot for easy installation.
LightEnerG Premium MH / HPS Switchable Quad Tap Ballast Kit (1,000 W)
Q100931
- 1,000 watt magnetic ballast.
- Can easily switch between MH and HPS bulbs by flipping a specialized switch.
- Can also be switched between four primary input voltages: 120 V, 208 V, 240 V or 277 V.
- The aluminum housing is specially designed to dissipate heat and keep components cool.
- Top of the line Aerovox® capacitor is also included.
- Use the 120 V or 240 V power cord (sold separately) to change between these two voltages.
- If 208 V or 277 V operation is required the wiring must be changed by a certified electrician.
- The lamp cord receptacle accepts all LightEnerG™ lamp cords and reflectors.
- UL approved.
LightEnerG Econo Ballast Box
Q101020
- Used to store HPS and MH ballasts safely and securely.
- Features pre-drilled holes to mount your ballast, capacitors, and ignitors.
- Mounting hardware is included.
LightEnerG Bracket for Cone and Parabolic Reflector, Small Hole (2 / pack)
Q101021
- Used with the LightEnerG Premium or Econo Cord and Socket Set.
- Provides mounting and support for the bulb and shade assembly.
- Proprietary design.
- Small hole.
LightEnerG Cone Reflector 4' (1.2 m), White
Q101023
- Cone shape provides broad light diffusion.
- White finish for maximum light reflection.
- Light weight and easy to assemble.
- Can accommodate all bulbs (not included).
- Includes four-piece base, a bracket to hold a mogul socket and screws.
- Mogul socket and power cord sold separately.
- Size: 4 feet (1.2 meters).
LightEnerG Light Wing 10 Reflector, 9 Bend, 20" x 17" (50 x 43 cm), White (without Cord / Mogul)
Q101025
- Customizable reflector: bend to create the desired lighting for plants.
- Made from German aluminum for 95% reflectivity.
- Ultra-lightweight.
- Size: 20 x 17 inches (50 x 43 centimeters).
- Color: White.
LightEnerG Light Wing 10 - 9 Bend 20" x 17" (50 x 43 cm), White (with Wire)
Q101027
- Customizable reflector: bend to create the desired lighting for plants.
- Made from German aluminum for 95% reflectivity.
- Ultra-lightweight.
- Pre-wired with a Leviton socket.
- Can accommodate most bulbs (not included).
- Includes hangers and a 15-foot (4.6 meter) 16/3 600 V lamp cord.
- Size: 20 x 17 inches (50 x 43 centimeters).
- Color: White.
LightEnerG Adjusta Shade Reflector (1,000 W)
Q101032
- Increases growing area under each lamp to maximize yields.
- Adjustable settings allows it to be positioned close to plants for greater area coverage.
- Simulates seasonal conditions indoors.
- Manufactured using high-end materials for efficient light and heat transfer.
- Accommodates all mogul based HID bulbs.
- Pre-wired with 15-ft (4.6 m) lamp cord and mogul socket.
- Wattage: 1,000 W.
LightEnerG Adjusta Shade Reflector (600 W)
Q101033
- Increases growing area under each lamp to maximize yields.
- Adjustable settings allows it to be positioned close to plants for greater area coverage.
- Simulates seasonal conditions indoors.
- Manufactured using high-end materials for efficient light and heat transfer.
- Accommodates all mogul based HID bulbs.
- Pre-wired with 15-ft (4.6 m) lamp cord and mogul socket.
- Wattage: 600 W.
LightEnerG Double-Ended Wing Reflector, 36" x 27.5" (91 x 70 cm) with 15' (4.5 m) Cord (1,000 W)
Q101035
- Engineered for use with ultra high frequency (UHF) electronic ballasts.
- Provides an extensive coverage area.
- cETL approved.
- Size: 36 x 27.5 inches (91 x 70 centimeters).
- Cord length: 15 foot (4.5 meters).
Fluence RAZR 4 LED Array PhysioSpec Indoor 120V-277V
Q101126
- Optimized for full-cycle leafy green, basil, strawberry and culinary herb production.
- Early-stage vegetative growth for vegetables, ornamentals, and other cultivars.
- Features a sleek form-factor, broad-spectrum light, and world-class energy efficiency.
- An average PPFD up to 375 µmol/m2/s over a 2' x 4' (61 x 122 cm) area with a 5” (12.7 cm) mounting height above canopy.
- Includes 5 lighting modules and covers 40 square feet (3.7 square meters) of canopy.
- Allows mounting as close as five inches (12.7 centimeters) from the plant canopy.
- Enables quick and easy deployment with a one-to-many design connecting up to ten modules to one power supply.
- Designed for a wide range of vertical farming applications.
- Voltage: 120 to 277 V.
Fluence RAZRx LED PhysioSpec Indoor 120V-277V
Q101125
- PhysioSpec indoor spectrum caters to various growth stages.
- Ideal for propagation to full-cycle microgreen and leafy green cultivation.
- Offers energy-efficient and space-saving benefits.
- Accelerates time-to-harvest.
- Voltage: 120 to 277 V.
Fluence VYPR 2p 47" (119 cm) LED PhysioSpec Indoor Spectrum (120 V to 277 V)
Q101165
- A full-cycle top lighting LED solution for high bay growing environments.
- Ideal for greenhouse supplemental lighting or indoor sole-source lighting.
- Builds on previous generation’s performance with nearly a 45% increase in PPF levels and a 18% increase in efficacy.
- Spectrum: PhysioSpec Indoor™.
- Light Output PPF: 1,700 µmol/s.
- Efficacy: 2.7 µmol/J.
- AC Input Power: 631 W @ 277 V AC.
- AC Input Voltage: 120 - 277V AC, 347 - 480V AC, 50/60 Hz.
- Light Distribution 120°.
- Mounting Height ≥ 18 inches (45.7 centimeters) above canopy.
- Certifications: UL 8800, UL 1598 Wet-Location, DLC.
- Actual dimensions (L x W x H): 46.1 x 2.9 x 3.3 inches (117.2 x 7.4 x 8.3 centimeters).
Fluence SPYDR 2p (Lightbar Only) 47" (119 cm) LED PhysioSpec Indoor Spectrum (DC)
Q101156
- Designed for full-cycle, close-proximity cultivation in controlled environments.
- Tailored to multi-tiered vertical applications where even one wasted inch is one too many.
- Spectrum: PhysioSpec™ Indoor.
- Size: 47 inches (119 centimeters).
- Lightbar only.