Lighting

• Connects Brand X ballasts with LightEnerG light fixtures.
• Ensures compatibility with all LightEnerG lamp cords and reflectors.
• Gauge: 14/3.
• Voltage: 600 V.
• Length: 1 foot (30 centimeters).

• Optimized for the flowering stage of growth.
• Approved for use with all ballasts.
• Suits the needs of both professional and hobbyist gardeners.
• Better PAR efficiency than MH or HPS lamps.
• Superior lamp to color consistency.
• Higher red spectral ratio enhancing flowering and growth.
• Creates a spectrum close to that of the sun.
• High color rendering index (CRI): 90 out of 100.
• Lower heat output watt-per-watt.
• 3,100 K.
• 575 µmol.

• Full spectrum ceramic metal halide lamp.
• Emits a blue light spectrum, making it ideal during the vegetative stage of growth.
• Better PAR efficiency than MH or HPS lamps.
• Added red spectrum for flowering efficiency.
• Creates a spectrum close to that of the sun.
• High color rendering index (CRI): 95 out of 100.
• Lower heat output watt per watt.
• 4,000 K.
• 540 µmol.

• Allows heat to dissipate away from the canopy.
• Greatly reduces garden hotspots.
• Increased lamp life thanks to less heat build-up.
• cETL approved.
• Width: 18.5 inches (46.99 centimeters).
• Height: 10.5 inches (26.67 centimeters).
• Cord length: 1 foot (30 centimeters).
• Weight: 7.5 pounds (3.4 kilograms).

• Engineered for use with ultra high frequency (UHF) electronic ballasts.
• Provides an extensive coverage area.
• cETL approved.
• Size: 18.5 x 18.5 inches (47 x 47 centimeters).
• Cord length: 15 foot (4.5 meters).

• Extremely efficient low-heat horticultural lighting system.
• T5 Super High Output (SHO) lighting provides an ideal spectrum for plant growth.
• Minimal heat output allows placement 6 to 8 in (15.24 to 20.32 cm) above plant canopy.
• No risk of scorching leaves, unlike MH lighting.
• Closer placement maximizes photosynthetic response and promotes fuller growth at lower wattage.
• Includes T5 SHO grow bulbs, built-in ballast, hanging hardware, and 12-foot (3.7-meter) grounded power cord.
• Two-year rebuild or replace warranty.
• ETL approved.
• Dimensions (L x W x H): 46.2 x 34 x 2.95 in (117 x 86 x 7.5 cm).

• Extremely efficient low-heat horticultural lighting system.
• T5 Super High Output (SHO) lighting provides an ideal spectrum for plant growth.
• Minimal heat output allows placement 6 to 8 in (15.24 to 20.32 cm) above plant canopy.
• No risk of scorching leaves, unlike MH lighting.
• Closer placement maximizes photosynthetic response and promotes fuller growth at lower wattage.
• Includes T5 SHO grow bulbs, built-in ballast, hanging hardware, and 12-foot (3.7-meter) grounded power cord.
• Two-year rebuild or replace warranty.
• ETL approved.
• Dimensions (L x W x H): 2 ft x 9 in x 3 in (60 x 23 x 7.6 cm).

• Versatile bare-wire-end female power cords.
• Suitable for a variety of applications.
• Gauge: 14/3.
• Length: 3 feet (1 meter).

• Broad white light with enhanced blue spectrum which may intensify terpene and cannabinoid profiles.
• A light weight, foldable, 6-bar design based on the Gavita Pro RS 2400e LED platform for balanced output and efficiency.
• Dimmable down to 10% with the Gavita EL3 Master controller (sold separately).
• Premium Gavita diodes.
• Broad Range Gavita driver to accomodate a larger voltage range of 208 - 480 V.
• IP66 wet rating and ANSI/CAN/UL 8800 compliant.
• Assembled in the USA using foreign components.
• Dimensions: 44.8 in x 43.25 in x 3.3 in (113.8 x 109.9 x 8.4 cm)
• Weight: 29.8 lbs (13.5 kg).

• Used with HID ballasts to store energy.
• Delivers long life and high temperature operation.
• Made in North America.

• Used with HID Ballasts to store energy.
• Engineered for long life and high temperature operation.
• Made in North America.

• Insulates the capacitor terminals.
• Prevents nuisance shocks.

• Used with HID ballasts and capacitors to start HPS bulbs.
• Engineered for long life and high temperature operation.

• Engineered for use with ultra high frequency (UHF) electronic ballasts.
• Provides an extensive coverage area.
• cETL approved.
• Width: 36.5 inches (92.7 centimeters).
• Height: 30 inches (76.2 centimeters).
• Cord length: 15 foot (4.5 meters).
• Weight: 5.95 pounds (2.7 kilograms).

• Designed to hang various grow equipment such as lights, fans, and filters.
• Easily clip and secure your gear using the heavy-duty carabiner hooks.
• Features a stainless steel locking ratchet to adjust the rope’s length.
• Made of 1/8” braided polypropylene rope and zinc-plated steel hooks.
• Weight capacity: 150 lbs/pair.
• Rope length: 8 ft.
• Pieces per pack: 2.

• High quality plugs securely connect to any IEC14 ballast.
• Male 240 V plug.
• Female IEC13 end.
• Gauge: 14/3.
• Length: 6 feet (1.8 meters).

• Single-ended horticultural fixture.
• Contains two Philips 315 watt 4,200° Kelvin CMH lamps.
• Ideal for vegetative or supplemental use.
• Repeater Bus interface enables external control with the Gavita® Master controllers.
• This compact fixture integrates ballast and reflector.
• Intelligent double-ballast concept: switch off one lamp in the fixture.
• Reflector is designed for CMH only installations:
• Medium 132° beam angle for double CDM 315 fixtures.
• High-grade Miro® aluminum.
• Provides 90%+ uniformity and optimal horizontal crop penetration.

Each Gavita LED Bracket unit includes 2 brackets (sold as a pair).

Fluence Wireless Flex Dimming delivers simplicity, flexibility, and cost savings to your grow operation by replacing dimming cables to each light fixture with wireless control. Wireless Flex Dimming realizes tremendous labor costs savings from reduced installation time, eliminating potential wiring errors. Simply plug a Wireless Flex Dimming Receiver into the dimming port of each Fluence light fixture, install a Wireless Flex Dimming 0-10 V adapter, and connect the 0-10 V dimming control per zone.

Wireless Flex Dimming features qualified Bluetooth mesh technology enabled by SILVAIR that is fully compatible with any 0-10 V dimmer or environmental controllers. Wireless Flex Dimming is easy to configure and enables HPS to LED retrofit growers to add precise dimming control without installing new wiring, maximizing ROI.

• One of the best 1,000 watt HPS lamps on the market.
• It is specifically designed for high frequency electronic ballasts.
• Connection at each end of the lamp removes need for a frame wire inside.
• Lamp jacket is made from quartz glass.
• For use with Gavita fixtures only.

• Bridges the gap between vegetative and flowering stages.
• Ensures plants' responses are at their fullest at all times.
• Leads to stronger root growth.
• Produces compact plants with extremely short internodal spacing.

• Designed to outperform standard MH bulbs.
• Light spectrum shifted toward blue make them ideal for the vegetative stage.
• Added red spectrum for flowering efficiency.
• Can be used in the horizontal and vertical position with the appropriate MH ballast.
• Wattage: 1,000 W.

• Designed to outperform standard MH bulbs.
• Light spectrum shifted toward blue make them ideal for the vegetative stage.
• Added red spectrum for flowering efficiency.
• Can be used in the horizontal and vertical position with the appropriate MH ballast.
• Wattage: 400 W.

• Designed to outperform standard MH lamps.
• Creates higher amounts of UV and infrared rays for stronger and woodier stalks.
• Higher red spectrum for flowering efficiency.
• Higher PAR efficiency than MH or HPS lamps.
• Superior lamp to color consistency.
• High initial and maintained lumens.
• Dependable long life (15,000+ hours).
• Universal Burning Position.
• High efficacy / low operating cost.
• Can work with both normal- and pin-operated sockets.
• Environmentally friendly.
• High color rendering index (CRI): 90+ out of 100.
• Lower heat output watt-per-watt.
• 3,100 K.
• 624 µmol.